Fisher Scientific Isotemp Incubator

US $5200

Englewood, Colorado, United States
Jun 1st

Open on mobile:
QR code

Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies and more. Electrical receptacle inside (5A at 120V) to plug in a stirrer, shaker or other apparatus. Easy to operate Microprocessor control Controls are conveniently located at the top of the incubator chamber Keypad with arrow keys to increase or decrease set point temperature in 0.1°C increments Overtemperature value is automatically set at 3°C above setpoint PID controller comes with fixed parameters so no tuning is required Circuit breaker protects incubator from power surges; battery backup Designed to stack two units Big three-character LED displayDigits display actual temperature to nearest 0.1°C Display shows current value for set point temperature HEAT indicator light cycles on and off to show when incubator heaters are on ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software Small, medium and large workload capacitiesAvailable in three chamber capacities Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds eleven Low-maintenance incubators with inner and outer doorsCabinet has durable, enamel-coated steel exterior Extruded aluminum trim has acrylic powder coating Chamber is easy-to-clean stainless steel Low-watt-density heater elements are designed for long life Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss Outer door opens to 180° for unhindered access and features two grabber-type latches Inner door is tempered glass Steel shelves are 17.37 in. wide and 16.75 in. front-to-back (44 x 42.5cm) Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation If you have specific questions regarding customizing instruments or shipping, please contact us at 720.524.7359 or Service@AltitudeLabSolutions.com Altitude Lab Solutions is a multi-vendor service company specializing in repairing Gas Chromatographs, Mass Selective Detectors, Liquid Chromatographs, Purge and Trap, Ion Chromatography, and Total Organic Carbon instruments. Our knowledge and experience was gained over many years in the analytical instrument environment. Combined, we have over 100 years of experience to share with our customers. Altitude is comprised of former manufacturers’ service technicians, laboratory managers and application chemists. The diversity of our backgrounds enables us to provide the best refurbished instruments and service in the industry. This is the organization that offers several choices to help resolve laboratory issues.