+ Post new Ad
Flex 1200Watt Bed 55 wet core drilling rig granite stone countertops, US $320 – Picture 0
Flex 1200Watt Bed 55 wet core drilling rig granite stone countertops, US $320 – Picture 0

Flex 1200watt Bed 55 Wet Core Drilling Rig Granite Stone Countertops

US $320

  • Kitchener, Ontario, Canada
  • Jun 12th
Open on mobile:
QR code
This is used but works when plugged in.  Here are the specs from internet.  Can send you a video of it running if that helps. Product Description Flex BED 55 Complete Core Drilling Unit for Confined Areas (110 Volt Only). The slim, stable drill stand, lateral supports and long feed column are characteristic of this drilling unit, enabling drilling of the next higher step from a lower one. Swivelling the feed column enables drilling in corners and recesses on banisters, gravestones and baths. Drilling speed can be adapted to any bit diameter (12mm - 85mm) thanks to mechanical 3-speed gearing and VR full-wave electronic control. FLEX Triple VR Electronics: With consistent speed control by tachometer generator, overload protection, and speed selection. Stationary Drill Stand: With precision column guide, drill stroke up to 300mm. Integrated Water Supply: Through the gear head. Water Collector with Suction Cup: For collecting water, even on stairs. Drill Bit Connection: G ½". Safety clutch. GFCI Operator Protector Circuit Breaker: Integrated in cord. Quality Shut-Off Carbon Brushes: Protects the motor against damage. . . Technical Specifications.  . . Power Input. 1,200 watts. . Power Output. 700 watts. . Speed Under Load 1st Gear. 350 - 1,000 rpm. . Speed Under Load 2nd Gear. 800 - 2,300 rpm. . Speed Under Load 3rd Gear. 1,600 - 4,600 rpm. . Tool Fixture. G ½". . Diamond Drill Ø. 12mm - 85mm. . Surface Area Occupied by Stand. 420mm x 120mm. . Weight (complete unit). 14.1Kg. .

Directions

Similar products from Core Drills & Rigs

One Set of Diamond Coring Bit Drill 32mm-76mm x 125mm with 5/8"-11 thread

One Set of Diamond Coring Bit Drill 32mm-76mm x 125mm with 5/8"-11 thread

  • Blaine, Washington, United States
  • Jun 13th
Ridgid Core Drill Machine 16382 230 Volt Motor

Ridgid Core Drill Machine 16382 230 Volt Motor

  • Hillburn, New York, United States
  • Jun 13th
Husqvarna 5400 Series 542761369 Wet Coring Segmented Bit 4-Inch

Husqvarna 5400 Series 542761369 Wet Coring Segmented Bit 4-Inch

  • Fort Lauderdale, Florida, United States
  • Jun 13th
Core Bit Adapter - 5/8"-11 Threaded Male to SDS PLUS Male for Hammer Drill

Core Bit Adapter - 5/8"-11 Threaded Male to SDS PLUS Male for Hammer Drill

  • USA, United States
  • Jun 13th
2PK Core Bit Adapter - 5/8"-11 Threaded Male to SDS PLUS Male for Hammer Drill

2PK Core Bit Adapter - 5/8"-11 Threaded Male to SDS PLUS Male for Hammer Drill

  • USA, United States
  • Jun 13th
Core Drill Bit Adapter 1-1/4” - 7 Thread Male to 1/2” Shank Diamond

Core Drill Bit Adapter 1-1/4” - 7 Thread Male to 1/2” Shank Diamond

  • Chino, California, United States
  • Jun 13th
Bosch T3917SC 3-1/8" SDS-plus SPEEDCORE Thin-Wall Bit

Bosch T3917SC 3-1/8" SDS-plus SPEEDCORE Thin-Wall Bit

  • Salisbury, North Carolina, United States
  • Jun 13th
Hand Held Core Drill Rig, Lackmond LCR200

Hand Held Core Drill Rig, Lackmond LCR200

  • Brunswick, Georgia, United States
  • Jun 13th
Combo 2", 2.5",3", 4" Wet Diamond Core Drill Bit for Concrete - Laser welded

Combo 2", 2.5",3", 4" Wet Diamond Core Drill Bit for Concrete - Laser welded

  • USA, United States
  • Jun 13th
2" Diamond core bit For Wet/Dry concrete and asphalt 1-1/4--7

2" Diamond core bit For Wet/Dry concrete and asphalt 1-1/4--7

  • Potomac, Maryland, United States
  • Jun 12th
Relton CC-12S Spline Drive Cold Chisel 1" x 12" Overall Length LOT OF 2

Relton CC-12S Spline Drive Cold Chisel 1" x 12" Overall Length LOT OF 2

  • Simpsonville, South Carolina, United States
  • Jun 12th
(1) Relton Removable Shank Core Bit 2-1/2"

(1) Relton Removable Shank Core Bit 2-1/2"

  • Simpsonville, South Carolina, United States
  • Jun 12th
Diamond Core Drill 15" Cutting Depth, Approx. 9" Outisde Dia. 15 Teeth

Diamond Core Drill 15" Cutting Depth, Approx. 9" Outisde Dia. 15 Teeth

  • Guntersville, Alabama, United States
  • Jun 12th
Tru-Cut PC3500 3-1/2 Taper Fit One-Piece Carbide Tipped Percussion Core Bits

Tru-Cut PC3500 3-1/2 Taper Fit One-Piece Carbide Tipped Percussion Core Bits

  • Houston, Texas, United States
  • Jun 12th
1-1/4" 5/8-11 Thread Cyclone Wet Core Drill Bit New Old Stock.

1-1/4" 5/8-11 Thread Cyclone Wet Core Drill Bit New Old Stock.

  • Naples, Florida, United States
  • Jun 12th
1PC Hilti Core Drill Adapter- Quick Disconnect Male Spline to 1-1/4"- 7 Thread

1PC Hilti Core Drill Adapter- Quick Disconnect Male Spline to 1-1/4"- 7 Thread

  • Monterey Park, California, United States
  • Jun 12th
1Pc Hilti Core Drill Adapter-Quick Disconnect 6 Slot to 1-1/4" - 7 Male Thread

1Pc Hilti Core Drill Adapter-Quick Disconnect 6 Slot to 1-1/4" - 7 Male Thread

  • Monterey Park, California, United States
  • Jun 12th
1-1/4 inch Super Puls Quality Wet/Dry Diamond Core Bits

1-1/4 inch Super Puls Quality Wet/Dry Diamond Core Bits

  • Potomac, Maryland, United States
  • Jun 12th
1-3/4 inch diamond core bit -For wet/dry drilling concrete and asphalt

1-3/4 inch diamond core bit -For wet/dry drilling concrete and asphalt

  • Potomac, Maryland, United States
  • Jun 12th
9" Professional quality -fast Drilling Diamond core bit

9" Professional quality -fast Drilling Diamond core bit

  • Potomac, Maryland, United States
  • Jun 12th

People who viewed this item also vieved

New Bostitch 5 pc Rotary Hammer Drill Bits BSA52005M

New Bostitch 5 pc Rotary Hammer Drill Bits BSA52005M

  • Crestwood, Kentucky, United States
  • Jan 30th
DELTA 17-911 Mortising Chisel & Bit set 1/2"

DELTA 17-911 Mortising Chisel & Bit set 1/2"

  • Bakersfield, California, United States
  • Jan 30th
DELTA 17-910 Mortising Chisel & Bit set 3/8"

DELTA 17-910 Mortising Chisel & Bit set 3/8"

  • Bakersfield, California, United States
  • Jan 30th
Klein Tools 32744 SQ2/SL316 - 1/4-Inch Hex Replacement Bits

Klein Tools 32744 SQ2/SL316 - 1/4-Inch Hex Replacement Bits

  • Annville, Pennsylvania, United States
  • Jan 30th
Klein #2 Square Power Drivers - 6" SQ262 (2/pack)

Klein #2 Square Power Drivers - 6" SQ262 (2/pack)

  • Annville, Pennsylvania, United States
  • Jan 30th
Klein Tools PH1355 - #1 Phillips Power Drivers - 3-1/2'' (89 mm) Bit (5/pack)

Klein Tools PH1355 - #1 Phillips Power Drivers - 3-1/2'' (89 mm) Bit (5/pack)

  • Annville, Pennsylvania, United States
  • Jan 30th
DeWalt 52mm 2" SDS-Max Extreme Masonry Cross Drill Bit Model DT9450-QZ, OL 570mm

DeWalt 52mm 2" SDS-Max Extreme Masonry Cross Drill Bit Model DT9450-QZ, OL 570mm

  • Lidcombe, NSW, Australia
  • Jan 30th
DeWalt 35mm SDS-Max Extreme Masonry Cross Drill Bit - Model DT9438-QZ, OL 570mm

DeWalt 35mm SDS-Max Extreme Masonry Cross Drill Bit - Model DT9438-QZ, OL 570mm

  • Lidcombe, NSW, Australia
  • Jan 30th
DeWalt 28mm SDS-Max Extreme Masonry Cross Drill Bit - Model DT9430-QZ, OL 570mm

DeWalt 28mm SDS-Max Extreme Masonry Cross Drill Bit - Model DT9430-QZ, OL 570mm

  • Lidcombe, NSW, Australia
  • Jan 30th
Bosch 1-1/4" SDS-Plus Quick-Change Rotary Hammer RH432VCQ NEW

Bosch 1-1/4" SDS-Plus Quick-Change Rotary Hammer RH432VCQ NEW

  • Lawrenceville, Georgia, United States
  • Jan 30th
NEW 1/2" HILTI TE24 TE25 QUICK RELEASE DRILL CHUCK KEYLESS ADAPTOR CHISELING

NEW 1/2" HILTI TE24 TE25 QUICK RELEASE DRILL CHUCK KEYLESS ADAPTOR CHISELING

  • United States
  • Jan 30th
NEW Hilti 1/4 X 4 TE-CX SDS Plus 1/4" x 4" Hammer Drill Masonry Bit

NEW Hilti 1/4 X 4 TE-CX SDS Plus 1/4" x 4" Hammer Drill Masonry Bit

  • United States
  • Jan 30th
HILTI SFH 18-A Li-Ion 1/2" Cordless Hammer Drill/Driv , charger Li-Ion battery

HILTI SFH 18-A Li-Ion 1/2" Cordless Hammer Drill/Driv , charger Li-Ion battery

  • Surrey, British Columbia, Canada
  • Jan 30th
Dewalt DW252 Drywall Screwgun

Dewalt DW252 Drywall Screwgun

  • Stroudsburg, Pennsylvania, United States
  • Jan 30th
Senco SG2500 VSR Screwrun w/ DS310 Autofeed System

Senco SG2500 VSR Screwrun w/ DS310 Autofeed System

  • Greenfield, Indiana, United States
  • Jan 30th
Makita Cordless Angle Drill Model DA3000D

Makita Cordless Angle Drill Model DA3000D

  • Newhall, California, United States
  • Feb 15th
34pc ROK 90° Right Angle Drill Driver Bits & Attachment w/Holder - 1/4" Drive

34pc ROK 90° Right Angle Drill Driver Bits & Attachment w/Holder - 1/4" Drive

  • Niagara Falls, New York, United States
  • Feb 15th
NEW DeWalt DW120K 1/2" Corded Right Angle Drill Kit 7 Amp

NEW DeWalt DW120K 1/2" Corded Right Angle Drill Kit 7 Amp

  • Richboro, Pennsylvania, United States
  • Feb 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies