Fluke 105 Digital Scopemeter Oscilloscope Multimeter Series Ii 100mhz

US $589.00

Baltimore, Maryland, United States
Jan 29th

Open on mobile:
QR code

General Product Information Mfr. Part Number: 105 Manufacturer: Fluke Description: Fluke 105 Scopemeter Oscilloscope Series II 100MHz Specifications: Bandwidth: 100 MHz; Coupling: AC, DC, Ground; Sensitivity: 1 mV to 100 V/div (With included 10:1 probe measure up to 600 Vrms); Modes: A, -A, B, -B, A+B, A-B, X vs. Y; Vertical resolution: 8 bits (256 levels); Accuracy: ±(2% of reading +1 pixel); Range: 5 ns/div to 60 s/div; Acquisition modes: Recurrent, Single shot, Envelope, Roll, Glitch detect, Average, ScopeRecord™; Maximum sample rate: 5 GS/s for repetitive signals; 25 MS/s for single shot; Maximum record length: Scope Record™(Fluke 105B, 99B & 96B only), 30k (up to 20ms/div-1 ch), 15k (up to 20ms/div-2 ch), 512 samples per channel (up to 5ns/div) (all models); Accuracy: ±(-0.1% of reading +1 pixel); Source: Input A, Input B, External; Modes: Free run, Triggered, Single; Types: Edge, Video, Event, N-cycle; Video: Triggers on Field 1, Field 2, Lines or selectable line number; Interlaced video: NTSC, PAL, PAL/M, SECAM, User selectable 2-Field or 4-Field sequence; Non Interlaced video: Line selection up to 3200 lines; Line frequency: 14 kHz to 65 kHz; Time delay: Up to 20 divisions pre trigger view, Up to 640 divisions trigger delay; Cursor Measurements: Up to 5 displayed simultaneously, Vrms (AC), Frequency, Vmean (DC),Risetime, Vpeak-peak, Time between cursors, Vmax-peak, Time at cursors (Time of day or Time from start), Vmin-peak, Phase dV between cursors, V at cursors, Measurements can be scaled to Amperes, Readouts in % change or delta-zero; Waveform Mathematics: Add, multiply, filter, subtract, invert, integrate. Instantaneous or mean watts with optional current probes; Zoom: Adjustable magnification, Allows full 30k record overview, or zoom in to single sample resolution; DC Voltage: Ranges-100 mV to 300V (With included 10:1 probe measure up to 600 Vrms); Accuracy: ±(0.5%+5 counts); AC or AC+DC true rms Voltage: Ranges-100 mV to 250V (with included 10:1 probe measure up to 600 Vrms); Accuracy: 50 Hz to 60 Hz ±(1%+10 counts), 20 Hz to 20 kHz ±(2%+15 counts), 5 Hz to 1 MHz ±(3%+20 counts), DC to 5 MHz ±(10%+25 counts); Additional Measurements: Continuity, Diode test, Amps, Hz, °C or °F, Pulse Width, Duty Cycle, RPM, dBm, dBV, dBW, Audio or RF Watts. (Amps, °C or °F with Optional Probes); Advanced METER Functions: Touch Hold®, Change Alert™, Smoothing™, Continuity Beeper, Readouts in % change, % scale or delta-zero; MIN MAX Trend Plot: Chart recording function to log MIN, MAX, and AVERAGE readings, Displays all 3 readings as graphs with time and date stamp, Automatic vertical scaling and horizontal time compression for recording from 120 seconds to 40 days; Sinewave: 1V pk-pk at 976 Hz with <-3% distortion; Squarewave: 5V pk-pk at 488 Hz, 976 Hz, or 1.95 kHz; Component Tester: Current or voltage ramp with 128 steps; General Specifications: The accuracy of all measurements are within ±(1% of ready ± number of counts) from 18°C to 28°C, Add 0.1 x (specified accuracy) for each °C<18°C or >28°C; Display: Cold cathode fluorescent back-lit liquid crystal; Size: 84x84 mm (3.3x3.3 inch); Contrast and brightness: User adjustable. Miscellaneous: High-Contrast, Backlit Display; Automatic Setup Measurements: 40; Waveform and Screen image transfers to a PC and Remote Operation; Screen Image Transfers to a PC; Signal Generator/Component Tester Output; On-line Help (information); 4 Hour NiCad Battery and Charger; Optically Isolated RS-232C Interface for Printer and PC (PM 9080 cable required); PC Software & PM 9080 Cable; Hard Carrying Case. This Item Details You are bidding on: One Fluke 105 Scopemeter Oscilloscope Series II 100MHz, in good working and cosmetic condition. Notes: Included in this auction are: (1) Fluke 105 Series II Scopemeter 100MHz, (1) Rechargeable Battery Pack, (1) Power Adapter / Charger, (1) Protective Holster, (1) Tested Lead Set, (1)Soft Carrying Case. The Serial Number in the pictures has been altered for privacy purposes. Condition: USED Shipping and Warranty Availability: In Stock Shipping Date: Same business day, if cleared payment is received by 6 PM EST Warranty: 30 DAYS Replacement Warranty, buyer pays return shipping This Item Pictures Shipping Shipping Date: Same business day, if cleared payment is received by 6 PM EST Carriers: US Destinations: Free FedEx Ground Service International Orders: USPS Express Mail International (insured) * Expedited shipping is available for an extra fee * International buyers pay all customs duties, taxes & brokerage fees Payment Payment Methods: Credit Cards Wire-transfer: contact us for payment instructions * Payment MUST be received within 7 days after the purchase * International buyers without PayPal: contact us before bidding * MD residents pay sales tax unless tax exempt Warranty and Returns Warranty: 30 DAYS Replacement Warranty, buyer pays return shipping Product Returns: Return Authorization is required for all Product Returns Warranty and Returns are subject to our Policies and Terms Products must be returned in the same condition as delivered Contact Us Company Address: PLC Hardware 11706 Garrison Forest Rd Owings Mills, MD 21117, USA Mon-Fri: 8:30am - 8.00pm ET Toll Free: 1. 877. 887. PLCH Email: PLCHardware.com We buy Fluke Parts

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Fluke
MPN	105
Model	105
Type	Scopetemter 100Mhz Series II