Fluke 360 Leakage Current Clamp Meter

US $600.00

Limerick, Ireland
Jan 29th

Open on mobile:
QR code

---Used only 3 times for specific project--- ---No signs of usage--- ---in perfect working and visual order--- ---All paperwork included--- ---All in original packaging--- Shipped with Express The Fluke 360 leakage tester is a rugged and accurate solution for leakage current measurement.Ideally designed for non-invasive checks of insulation condition, the Fluke 360 leakage meter allows you to perform tests without powering down the installation or disconnecting equipment - saving you time, without compromising on quality or safety. The unique jaw design of the Fluke 360 AC Leakage Current Clamp Meter eliminates the influence of adjacent current conductors, and minimizes the effects of external magnetic fields, even at low currents. This allows you to perform accurate and reliable tests in today’s crowded electrical environments. The tough and high-quality jaw design of the Fluke 360 leakage tester guarantees high stability for long-term repeatability and durability. Why leakage current testing? Leakage currents can be an indicator of the effectiveness of insulation on conductors. High levels of leakage current may be present in circuits where either the insulation resistance is low, or electronic equipment with filters is used. Leakage currents can cause disruptions of the normal operation of equipment and installations. It is possible to locate the source of leakage currents by using the Fluke 360 leakage current clamp meter and taking methodical measurements throughout the installation. The big advantage of leakage current testing versus insulation testing is that the installation and equipment do not need to be powered down but can be done during normal operation. Features Measurement of leakage current with 3 mA range and 1 µA of resolution, for accurate monitoring of insulation erosion Broad range of measurement, from 1 µA up to 60 A, for all installation needs Advanced shielding to ensure accurate results when measuring near other conductors The high durability clamp construction can withstand over 50,000 operations, added ruggedness that extends the life of your leakage clamp. Easy-to-carry, pocket-sized leakage current tester with wide 40 mm (1.5 in) jaw size Handy “Display-Hold” button for capturing leakage current readings in hard-to-reach places Auto power-off, with warning buzzer, saves battery life Conformance to IEC1010 and EMC standard for confident measurements Meets all of the applications and performance classes in safety standard VDE0404-4 and VDE0702 for leakage current and differential current measurement of electrical appliances General Specifications Method of detection Mean value Display Digital display: 3200 counts Bar-graph display: 32 segments, LCD Measurement Cycle 2 times/second (Digital display), 12 times/second (Bar-graph display) Range switching Auto-range Ambient temperature and humidity 0 °C to 50 °C, 80 % RH or less (no condensation) Temperature coefficient 0.05% of range/°C or less (within the ranges of 0 °C to 18 °C and 28 °C to 50 °C for measurement of 0-50 A) Influence of external magnetic field 0.0005% typical Influence of conductor position Within accuracy Circuit voltage <300 Vrms Safety standard EN 61010-1, EN 61010-2-032, 300 V CAT III, Pollution Degree 2 Withstanding voltage 3.7 kV ac Battery type 1 x 3 V Lithium battery (button cell) CR2032 Battery life Approx. 90 hours (when continuously used) Auto power-off Approx. 10 minutes Diameter of measurable conductor 40 mm max. Weight 200 g Dimension 176 mm x 70 mm x 25 mm Operating altitude 2000 m Electrical Specification Specifications at 23 ± 5 ?C, 80 % RH max Accuracy (% readout + value of least significant digit) 3 mA Resolution: 0.001 mA Accuracy: 1% + 5 Max Permissible current: 60 A rms 30 mA Resolution: 0.01 mA Accuracy: 1% + 5 Max Permissible current: 60 A rms 30 A Resolution: 0.01 A Accuracy: 1% + 5 Max Permissible current: 60 A rms 60 A Resolution: 0.1 A Accuracy: 5% + 5 Max Permissible current: 60 A rms Mean value detection and rms-value calibration Accuracy specified at: 50/60 Hz

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Used only 3 times for specific project. No signs of usage, in perfect working and visual order, All paperwork included. All in original packaging.”