Home page About Us Feedback See our other products Add to Favourite Contact us Shop categories Baby Automotive Electronics Home Improvement Kitchen & Dining Home & Kitchen Musical Instruments Office Products Toys & Games Shop pages Home page See Our Other Products Add to Favourite About the seller Fluke 360 Leakage Current Clamp-Meter, 1 Microampere to 60A AC, Conductors to 40mm Product Specification Digital clamp-meter measures leakage AC from 1microampere to 60A to check the condition of conductor insulation Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform Clamp with 40mm (1.5 inches) jaw opening measures current without touching or interrupting the circuit Enhanced shielding in the jaws minimizes interference from nearby current conductors and external magnetic fields to provide accurate measurements Meets EN and IEC safety standards 61010-1 and 61010-2-032 (pollution degree 2), and is rated for CAT category III installations to 300V Features The Fluke 360 current leakage clamp-meter is an average-sensing, auto-ranging digital meter for measuring leakage AC (alternating current) from 1?A to 60A; to check the condition of conductor insulation in electrical testing applications. The clamp has two jaws that can close around an electrical conductor up to 40mm (1.5 inches) in diameter to measure current without touching or interrupting the circuit. Enhanced shielding in the jaws minimizes interference from nearby current conductors and external magnetic fields to provide accurate measurements. The meter has a 3,200-count LCD that shows the reading numerically and in a 32-segment bar graph. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the reading on the display after disconnecting from the circuit. The unit operates on a single 3V CR2032 battery, and turns off automatically after ten minutes of non-use to conserve battery life. A warning beeper sounds 15 seconds before shutdown, and a low-battery indicator signals when the battery needs to be replaced. This average-sensing, also called average-responding or mean value, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Accuracy and resolution specifications vary according to the range being measured. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. The meter meets EN (European Standards) and IEC (International Electrotechnical Commission) safety standards 61010-1 and 61010-2-032 (pollution degree 2), and is rated for CAT (category) III installations up to 300V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It has CE (European Conformity) marking, and meets safety standard VDE0404-4 and VDE0702 for leakage current and differential current measurement of electrical appliances. The unit comes with a soft carrying case. Specifications Maximum AC (alternating current) input 60A Installation rating CAT III, 300V Standards met EN and IEC safety standards 61010-1 and 61010-2-032 (pollution degree 2); CE marking; VDE0404-4 and VDE0702 leakage current standards Power supply 3V CR2032 battery Weight 200g Dimensions (H x W x D) 176 x 70 x 25mm H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Clamp-meters, also called clamp-on meters, have two jaws that fit around a conductor to measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp-meters diagnose problems in electrical equipment, wiring, and power supplies. All clamp-meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA. What's in the Box? Fluke 360 digital clamp-meter 3V CR2032 battery Soft carrying case Instructions Additional Information Manufacturer: Fluke Corporation Shipping Weight: 90 Product Dimensions: Width: 4.60 Length: 8.30 Height: 2.70 Delivery Information Refunds & Returns About Us Our Guarantee Contact Us All our stock is at our US warehouse.Your item will be shipped by either DHL or UPS depending on the size/weight of the package and delivery location. We aim to ship orders within 24hours of processing your payment. Shipping is free. 30 day return or exchange policy for all our products. Only factory defects are accepted as the reason for product return. Returned item(s) must be returned with package completely intact, and all accessory(s) inside the package must be original condition.We do not pay for the postage costs for returned defective items.Items returned must be received within 30 days from purchase. No refund or replacement is issued after 30 day time period after purchase. Please allow up to 7 working days to process your returned item(s) after we receive it.We are extremely fair, and in the rare event of something unusual happening, we will gladly work with you to find a solution. We sell on eBay since 2007. We are based in the US and ship from our own warehouses. Our products are 100% authentic and all brand new. We work with the biggest suppliers in the UK to bring you the best quality items!We guarantee to provide the best service. Customer satisfaction guaranteed!We offer a 100% Satisfaction Guarantee on all sales. If you are not happy with your purchase for any reason, please contact us within seven days of receipt of your item, or email us to share your concerns. We are extremely fair and will happily work with you to find a solution to any problem.We aim to maintain 100% feedback, and we want every single one of our customers to be a happy one. So in the rare case something does go wrong, before leaving a negative feedback, contact us so we can help make things right! In the rare event that you have an issue with your product or our service please contact us by email to share your concerns, we will respond within 24 hours to help to rectify the problem.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
