Fluke 435-II Series 2 Three-Phase Power Quality and Energy Analyzer - Pristine!, US $920 – Picture 0

Fluke 435-II Series 2 Three-Phase Power Quality and Energy Analyzer - Pristine!, US $920 – Picture 1

Fluke 435-ii Series 2 Three-phase Power Quality And Energy Analyzer - Pristine!

US $920

Campbell, California, United States
Jan 29th

Open on mobile:
QR code

Prestine! Used only once. 435-II FLUKE 435-II POWER QUALITY ANALYZER PowerWave Data Capture: Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics Waveform Capture: capture 100/120 cycles (50/60Hz) of each event that is detected in all modes These power quality and energy analyzers help locate and predict, prevent and troubleshoot power quality problems in three-phase and single-phase power distribution systems Energy Loss Calculator: classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars Power Inverter Efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp Troubleshoot Real-time: Analyze trends using cursors and zoom tools Measure all Three Phases and Neutral: With included flexible current probes (4) with enhanced thin flex designed to fit into the tightest places Automatic Trending: Every measurement is always automatically recorded, without any set-up System Monitor: Ten power quality parameters on one screen according to EN61060 power quality standard Logger Function: Configure for any test condition with memory for up to 600 parameters at user defined intervals View Graphs and Generate Reports: With included analysis software Battery Life: Seven hours of operating time per charge on Li-ion battery pack Automatic Transient Mode: Capture 200kHz waveform data on all phases simultaneously up to 6kV Fully Class A Compliant: Conduct tests according to stringent international IEC 61000-4-30 Class A standard Mains Signaling: Measure interference from ripple control signals at specific frequencies Specifications: Voltage Measurements Measuring Ranges: Vrms (ac+dc): 1 to 1000V; Vpk: 1 to 1400Vpk; Volt CF: 1.0 > 2.8 Resolution: Vrms (ac+dc): 0.01V; Vpk: 1V; Voltage Crest Factor: 0.01 Accuracy: Vrms (ac+dc): ± 0.5% of nominal range; Vpk: ± 0.1% of nominal range; Volt CF: ± 5%;M Amp Measurements Measuring Ranges: Amps (ac+dc): 5 to 6000A; Apk: 8400Apk; Amp Crest Factor: 1 to 10; Amps 1/2 : 5 to 6000A; Afund: 5 to 6000A Resolution: Amps (ac+dc): 1A; Apk: 1Arms; Amp Crest Factor: 0.01; Amps 1/2 : 1A; Afund: 1A Accuracy: Amps (ac+dc): ± 0.5% ± counts; Apk: ± 5%; Amp Crest Factor: ± 5%; Amps 1/2 : ± 1% ± 10 counts; Afund: ± 0.5% ± counts Harmonics Measurements Voltage Harmonic Ranges: %of: 0.0 to 100%; %or: 0.0 to 100%; Absolute: 0.0 to 1000V; THD: 0.0 to 100% Volt Resolution: %of: 0.1%; %or: 0.1%; Absolute: 0.1V; THD: 0.1% Volt Accuracy: %of: ± 0.1% ± n x 0.1%; %or: ± 0.1% ± n x 0.4%; Absolute: ± 5%; THD: ± 2.5% Amp Harmonic Ranges: %of: 0.0 to 100%; %or: 0.0 to 100%; Absolute: 0.0 to 600A; THD: 0.0 to 100% Amp Resolution: %of: 0.1%; %or: 0.1%; Absolute: 0.1A; THD: 0.1% Amp Accuracy: %of: ± 0.1% ± n x 0.1%; %or: ± 0.1% ± n x 0.4%; Absolute: ± 5% ± 5 counts; THD: ± 2.5% Video: http://youtu.be/UMQdW9lRbR4

Condition	Seller refurbished : An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.
Seller Notes	“This item has been used once. It's like new other than sitting in the garage stowed away...No scratches, No wear, No missing parts”