Fluke 725 MultiFunction Process Calibrator, NIB, Never Used, US $1,900.00 – Picture 0

Fluke 725 MultiFunction Process Calibrator, NIB, Never Used, US $1,900.00 – Picture 1

Fluke 725 MultiFunction Process Calibrator, NIB, Never Used, US $1,900.00 – Picture 2

Fluke 725 MultiFunction Process Calibrator, NIB, Never Used, US $1,900.00 – Picture 3

Fluke 725 Multifunction Process Calibrator, Nib, Never Used

US $1,900.00

Weatherford, Texas, United States
Feb 21st

Open on mobile:
QR code

New Never used. Ordered by mistake and never returned. The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. Small, streamlined shape, rugged, reliable design stands up to field use Easy to read measure/source screen lets you view input and output simultaneously Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules Source mA with simultaneous pressure measurement to conduct valve and I/P tests Support flow meter testing with frequency and CPM functions Perform fast linearity tests with auto- step and auto-ramp features Power transmitters during test using loop supply with simultaneous mA measurement Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms Store frequently used test setups for later use Measurement Accuracy Voltage DC 30.000 V 0.02% + 2 counts (upper display) 30.000 V 0.02% + 2 counts (lower display) 100.00 mV 0.02% + 2 counts -10.00 mV to 75.00 mV 0.025% + 1 count (via TC connector) Current DC 24.000 mA 0.02% + 2 counts Resistance 0.0 to 400.0 ? 0.1 ? (4-wire), 0.15 ? (2- and 3-wire) 401 to 1500 ? 0.5 ? (4-wire), 1 ? (2- and 3-wire) 1500 to 3200 ? 1 ? (4-wire), 1.5 ? (2- and 3-wire) Frequency 2.0 to 1000.0 CPM 0.05% + 1 count 1.0 to 1100.0 Hz 0.05% + 1 count 1.00 to 10.00 kHz 0.05% + 1 count Sensitivity 1 V peak-to-peak-minimum Pressure Accuracy from 0.025% of range using any of 29 pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure. Source Accuracy Voltage DC 100.00 mV 0.02% + 2 counts 10.000 V 0.02% + 2 counts -10.00 mV to 75.00 mV 0.025% + 1 count (via TC connector) Current DC 24.000 mA (source) 0.02% + 2 counts 24.000 mA (simulate) 0.02% + 2 counts Resistance 15.0 to 400.0 ? 0.15 ? (exc. current 0.15 to 0.5 mA), 0.1 ? (exc. current 0.5 to 2 mA) 401 to 1500 ? 0.5 ? (excitation current 0.05 to 0.8 mA) 1500 to 3200 ? 1 ? (excitation current 0.05 to 0.4 mA) Frequency 2.0 to 1000.0 CPM 0.05% 1.0 to 1100.0 Hz 0.05% 1.00 to 10.00 kHz 0.25% Waveform 5 V p-p squarewave, -0.1 V offset RTDs and Thermocouples Measure accuracy NI-120 0.2°C PT-100 (385) 0.33°C PT-100 (393) 0.3°C PT-100 (JIS) 0.3°C PT-200 (385) 0.2°C PT-500 (385) 0.3°C PT-1000 (385) 0.2°C Resolution 0.1°C J 0.7°C K 0.8°C T 0.8°C E 0.7°C R 1.8°C S 1.5°C B 1.4°C L 0.7°C U 0.75°C N 0.9°C Resolution J, K, T, E, L, N, U: 0.1°C, 0.1°F B, R, S: 1°C, 1°F XK 0.6°C BP 1.2°C Source accuracy NI-120 0.2°C PT-100 (385) 0.33°C PT-100 (393) 0.3°C PT-100 (JIS) 0.3°C PT-200 (385) 0.2°C PT-500 (385) 0.3°C PT-1000 (385) 0.2°C Resolution 0.1°C Accuracy stated for 4-wire measurement. J 0.7°C K 0.8°C T 0.8°C E 0.7°C R 1.4°C S 1.5°C B 1.4°C L 0.7°C U 0.75°C N 0.9°C Resolution J, K, T, E, L, N, U: 0.1°C, B, R, S: 1°C XK 0.6°C BP 1.2°C Specifications Ramp functions Source functions Voltage, current, resistance, frequency, temperature Ramps Slow ramp, Fast ramp, 25% step-ramp Loop power function Voltage 24 V Accuracy 10% Maximum current 22 mA, short circuit protected Step functions Source functions Voltage, current, resistance, frequency, temperature Steps 25% of range, 100% of range Environmental Specifications Operating temperature -10°C to +55°C Storage temperature -20°C to 71°C Operating altitude 3000 m Safety Specifications Agency approvals EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 Mechanical and General Specifications Size 130 x 236 x 61 mm Weight 0.65 kg Batteries 4 AA alkaline batteries Battery replacement Separate battery compartment, accessable without breaking calibration seal Side port connections Pressure module connector, also used for remote real-time programming

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Fluke
Model	725 US