Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: Fluke Networks Fiber OneShot (BC# 22585) SC Connector For Unit (2) SM SC-SC Fiber Cables Hard Copy User Manual User Manual On CD-ROM Carrying Case BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! Fluke Networks Fiber OneShot Optical Test Set Quickly and accurately verify if a fiber is active, find the distance to a break or end, dirty end face or reflective event For testing at the central office, node, hub, drop & optical network terminal (ONT) Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Warranty: 90 Day Exchange Warranty Fluke Networks Fiber OneShot Optical Test Set Introducing the new innovative, pocket-size Fiber OneShot Optical Test Set. Bringing you a simple test set for traditionally complex single-mode fiber testing. Designed with an intuitive one button test capability, you are testing in just a few seconds. Quickly and accurately verify if a fiber is active, find the distance to a break or end, dirty end face or reflective event. This test set goes from zero to 9,999 feet, with no dead zone. For testing at the central office, node, hub, drop & optical network terminal (ONT); Fast testing for essential fiber troubleshooting Fast testing for essential fiber troubleshooting: Light or No light – is my fiber active? CheckActive alert Distance to event (fault): Dirty end face/bulkhead and break or reflective event Distance to event (end): End of fiber Durability for the outside plant environment Built to last, the Fiber OneShot incorporates an energy-absorbing holster over an impact-resistant case to withstand drops, impacts, and the tough outside plant environment. Together with a heavy duty tethered end cap to protect the fiber adapter, the Fiber OneShot is the test set for demanding field applications, ensuring trouble-free operation. Testing benefits that increase your productivity: Measure the length to a break, end, dirty end face/bulkhead, or reflective event quickly and accurately from 0 – 9,999 feet (note* 0 – 6,000 meters displayed in metric mode) New CheckActive™ feature: alerts the user if an optical signal is on the fiber Instant-on: no boot/load time Single button testing: essential fiber testing in just a few seconds No dead zone: locate fiber faults at 1-meter Features: Essential fiber test results displayed numerically, no interpretation needed Extra large liquid crystal display (LCD) with programmable backlight for use in any environment Auto shut down to extend battery life Battery life gauge Extended battery life, up to 5,000 tests Field-replaceable (2) AA batteries Quick change battery compartment, no screwdriver needed Removable/cleanable SC adapter Self calibrating, factory calibration not required Adjustable feet/metric mode Adjustable APC/UPC mode Adjustable index of refraction (I.O.R.) mode Output wavelengths 1310 nm ± 25 nm Specifications: Operating temperature with the battery 0?C to 50?C Non-operating temperature -20?C to 60?C Operating relative humidity (without condensation) 95% (10?C to 35?C) 75% (35?C to 40?C) uncontrolled < 10?C Vibration Random, 5 Hz to 500 Hz, MIL-PRF-28800F CLASS 2 Shock 1 meter drop test UPC or APC open Break Reflective incident Poor bulkhead connection BREAK OR END OF FIBER 0 ft/m (Will not measure a splice loss, connector loss, bend loss, or fiber attenuation.) LCD type Backlit black and white (segments) Index of refraction range 1.45 to 1.5 (factory default is 1.468) Auto turn off Automatically turns off after 5 minutes if no keys are pressed. Factory calibration interval None Output wavelengths 1310 nm ± 25 nm Emitter type Fabry-Perot laser diode connected to 9/125 µm fiber Laser classification Class 1 CDRH Complies to EN 60825-2 Pulse widths 20 ns to 500 ns Power into fiber under test > 10 mW-pk Dynamic range > 11 dB Distance to first reflective open 1 m Photodiode 40 µm – 80 µm, PIN InGaAs Safety CSA C22.2 No. 61010.1:04, EN 61010-1 2nd Edition 2001, EN60825-1, 2:2006 Altitude 3000 m EMC EN 61326-1: 2004 Sampling spacing 12.5 cm to 1 m (1.25 ns to 10 ns) Instrument reporting information Distance to the first reflective incident and/or end of fiber Maximum distance 6000 meters or 9999 feet Distance accuracy (0 m to 3000 m or 0 ft to 9999 ft) ± 1 m for reflective incidents, ± 0.1% of length6 ± 3 m for non-reflective incidents, ± 0.1% of length Testing speed < 6 seconds typical Connector Removable/cleanable SC adapter, UPC polish Fiber types tested 9/125 µm singlemode Reflectance threshold -40 dB typical APC open detection -65 dB reflectance typical and backscatter > 3 dB above the noise floor Detector type InGaAs PIN photodiode used in incident detection Safety CSA C22.2 No. 61010.1.04, EN 61010-1:2001 {2nd Edition}, EN60825-1:2007 Class 1 Laser EMC EN 61326-1, EN61000-4-2, 3 80 MHz to 2.7 GHz @ 3V/m. Telephony Requirements: Class B Emissions Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to ourEbay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Put your auctions on autopilot with Kyozou eBay Auction Tools
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
