Fluke Networks Ts-100-pro-bt-tdr Cable Fault Finder With Powerbt Bridge Tap

US $149.99

Waukesha, Wisconsin, United States
Jun 9th

Open on mobile:
QR code

Fluke Networks TS100-PRO-BT-TDR Cable Fault Finder TDR Kit with Bridge Tap Detect Bridge tap detection for xDSL pre-qualificationReports distance to multiple bridge taps up to 3,200 ft. Sees past bridge taps to the end of the cable Tests opens and shorts up to 8,000 ft. Patented SmartTone tone generator with five different tones for exact pair identification Built-in TDR AC/DC voltage detection One-button testing Built-in toner Used by telecommunications, triple-play/voice, data, and video professionals, the TS100-PRO-BT-TDR Cable Fault Finder with PowerBT Bridge Tap Detect accurately locates multiple bridge taps in seconds on up to 3,200 feet of cable at the touch of a button. The TS100-PRO-BT-TDR also tests for open and short circuits—up to 8,000 feet—and AC/DC voltage from just one end of any two conductor wires, telephone wires, security wires or coax cables. Five-in-one tool: bridge tap detector, open and short detector, voltage detector, SmartTone with five different tones Features: Bridge tap detection for xDSL pre-qualificationReports distance to multiple bridge taps up to 3,200 feet (975 metres) Sees past bridge taps to the end of the cable Long-distance tester—tests opens and shorts up to 8,000 feet (2.4 kilometres) Patented SmartTone tone generator with five different tones for exact pair identification Built-in TDR (Time Domain Reflector) AC/DC voltage detection One-button testing Built-in toner Benefits: Affordable bridge tap detection Improve xDSL network performance Five-in-one tool—distance to bridge taps, open and short circuits, voltage detector and SmartTone with five different tones No complicated set up or expertise required No interpretation or analyses of complex graphs Models & Accessories Models Model Number/Name Description TS100-PRO-BT-TDR TS100 PRO Cable Fault Finder TDR Kit with Bridge Tap Detect LEAD-ABNP-100 Test lead with angled-bed-of-nails and piercing pin. Compatible with the TS100 and TS100 PRO CASE-TS100 TS100/TS100PRO pouch with Fluke Networks’ logo LEAD-ALIG-100 Test lead with alligator clips. Compatible with the TS100 and TS100 PRO LEAD-ABN-100 Test lead with angled-bed-of-nails. Compatible with the TS100 and TS100 PRO Specifications Specifications for the TS100 PRO Maximum Length 8,000 feet (2,438 meters) on certain cable types, 4,000 feet (1,220 meters) on most cable types, and 500 feet (152 meters) on cables with high loss. The tester shows -Err if the cable is too long to be correctly measured. Representative Maximum Cable Length 8,000 feet (2,438 meters): CAT-3 Twisted Pair 8,000 feet (2,438 meters): CAT-5 Twisted Pair 6,000 feet (1,830 meters): 12/2 AC Wire 3,000 feet (900 meters): RG-6/U TV Coax 1,500 feet (457 meters): RG-174/U Coax Minimum Length No minimum length (can read a bridge tap at 0 feet/meters). Minimum non-zero reading is 2 feet or 1 meter. Length Accuracy ±2 feet (±0.6 m) for cables less than 10 feet (3 m) ±5 feet (±2 m) for cables longer than 10 feet (3 m) and shorter than 200 feet (60 m) +/-3%+/-5 feet (±2 m) for cables longer than 200 feet (60 m) Distance to Bridge Tap 0 feet to 3,200 feet (975 meters) Minimum Length of Bridge Tap 10% of the distance to the bridge tap. Dependant on the cable characteristics. Measurement Rate Maximum of 4 complete measurements per second, decreasing to 2 seconds per measurement based on cable size and uniformity. VOP Adjustable from 20 to 99, saved in flash memory. Test Technology Time Domain Reflectometry (TDR) with 100 ? drive impedance, 6v maximum pulse height. Cable Type Virtually all two or more conductor cables. Power 4 AA alkaline batteries. Reverse Battery Protection No damage to the tester will occur if the batteries are installed backwards. Battery Life 35 hours (typical) Low Battery Indication LED display alternates between LO and bAtt when the battery voltage falls below 4.5v. Maximum Output Voltage 4 voltage peak Maximum Isolation Voltage 250 volts RMS Voltage Measurements Range: 0 volts AC to 115 volts AC; 0 volts DC to ±150 volts DC Accuracy: AC: +/-1%+/-2 volts (45 Hz to 65 Hz); DC: +/-1%+/-2 volts DC High Voltage Detection AC voltage detected to 115 volts; DC voltage detected to ±150 volts. AC voltage >=90 volts or DC voltage >=100 volts causes high voltage warnings to show on the display SmartTone® (5-tones) Range 7,000 feet (2,134 meters) Toner Range 52,800 feet (16,093 meters) Tone Injection Approximately 1 kHz at an amplitude of 80% of battery voltage. Variable frequency and cadence. Tone characteristics change as cable condition changes to “normal-open” from any other condition. Impedance Range 35 ? to 330 ? with auto-compensation within this range. Cables with impedances outside this range will not be properly tested and may produce erratic or incorrect readings. Temperature Range Operating: 32°F to 104°F (0°C to 40°C) Storage: 32°F to 131°F (0°C to 55°C) Humidity Operating: 20% to 80% relative humidity Storage: 0% to 100% relative humidity Operating Humidity 80% maximum at 86°F (30°C ) 50% maximum at 104°F (40°C ) Operating Altitude 9,843 ft max (3,000 m max) Weight 1 lb (454 grams) Dimensions 7.4 in x 2.7 in x 1.4 in (18.8 cm x 6.9 cm x 3.6 cm)

“Mint condition new case and cords.”

Brand	Fluke Networks
MPN	TS100-PRO
Model	TS100-PRO