+ Post new Ad
Forklift by Yale 5,000 Lb. Capacity In Good Operating Condition, US $4,750.00 – Picture 0
Forklift by Yale 5,000 Lb. Capacity In Good Operating Condition, US $4,750.00 – Picture 0

Forklift By Yale 5,000 Lb. Capacity In Good Operating Condition

US $4,750.00

  • Dalton, Georgia, United States
  • Mar 9th
Open on mobile:
QR code
Forklift by Yale 5,000 Lb. Capacity In Good Operating Condition  Two stage-tilt-no side shift-42" forks Run hour meter shows 6,999 but we can not verify if it is correct  Inspection:  This item is welcome to inspection by the buyer or buyer's representative before purchase.  Please contact us for further details. Shipping: Buyer is responsible for shipping costs and due to the nature of this item, it will need to be shipped common carrier or local pick up.. Please contact us with your zip code and whether it would be going to a commercial address with a dock or outdoor forklift (either yours, one you are employed at, or a friend or relative's), one without, or residence for an accurate shipping quote. It is imperative that you provide both pieces of information! Please note residential delivery is typically higher, so it is better to have it delivered to a commercial address or to one of our carrier's terminals in your area for pickup at the terminal. Also, we are able to ship using your carrier if preferred and we will provide the necessary contact information to forward a bill of lading, pickup address, etc. Local pickup is available as well. Can you believe our  price? Packoderm Industrial - Eliminating pack rats one sell at a time! Sellers: Delight buyers. Get your own map of past buyers. FREE! Sellers: Add a FREE map to your listings. FREE!
“Fork lift is in good operating condition”
Brand Yale
Model 5,000 Lb

Directions

Similar products from Tools for Other Machines

Sweeney Torque multiplier

Sweeney Torque multiplier

  • Elm City, North Carolina, United States
  • Mar 9th
Nice Rare Germany Ackermann U.Schmiitt DK950 1120W AS-Flex Nibbler Electric,warr

Nice Rare Germany Ackermann U.Schmiitt DK950 1120W AS-Flex Nibbler Electric,warr

  • Richmond, BC, Canada
  • Mar 9th
Malco Angle Drive Accessory for Malco HC Series Hole Cutters - HCAD

Malco Angle Drive Accessory for Malco HC Series Hole Cutters - HCAD

  • Reading, Michigan, United States
  • Mar 9th
GRS BENCHMATE DELUXE PACKAGE WITH ADAPTER JEWELRY TOOLS 2YR WARRANTY 004-603

GRS BENCHMATE DELUXE PACKAGE WITH ADAPTER JEWELRY TOOLS 2YR WARRANTY 004-603

  • Mission Viejo, California, United States
  • Mar 9th
GRS BENCHMATE PLUS PACKAGE WITH ADAPTER JEWELRY TOOLS 2YR WARRANTY 004-604

GRS BENCHMATE PLUS PACKAGE WITH ADAPTER JEWELRY TOOLS 2YR WARRANTY 004-604

  • Mission Viejo, California, United States
  • Mar 9th
GRS BENCHMATE SETTERS PACKAGE WITH ADAPTER JEWELRY TOOLS 2YR WARRANTY 004-683

GRS BENCHMATE SETTERS PACKAGE WITH ADAPTER JEWELRY TOOLS 2YR WARRANTY 004-683

  • Mission Viejo, California, United States
  • Mar 9th
GRS POWER HONE COMPLETE DUAL ANGLE JEWELRY SHARPENING SYSTEM 2Y WARRANTY 003-577

GRS POWER HONE COMPLETE DUAL ANGLE JEWELRY SHARPENING SYSTEM 2Y WARRANTY 003-577

  • Mission Viejo, California, United States
  • Mar 9th
Serdi Carbide Pilot 7.95mm or .3130 Inches. Brand New/Sunnen/Rottler

Serdi Carbide Pilot 7.95mm or .3130 Inches. Brand New/Sunnen/Rottler

  • North Bend, Washington, United States
  • Mar 9th
Serdi Carbide Pilot 6.99mm or .2752 Inches. Brand New/Sunnen/Rottler

Serdi Carbide Pilot 6.99mm or .2752 Inches. Brand New/Sunnen/Rottler

  • North Bend, Washington, United States
  • Mar 9th
KOMBI SCHLEIF – AGATHON TYPE TOOL GRINDER - Inv # 4849

KOMBI SCHLEIF – AGATHON TYPE TOOL GRINDER - Inv # 4849

  • Farmingdale, New York, United States
  • Mar 9th
Hardinge style carriage stop

Hardinge style carriage stop

  • San Carlos, California, United States
  • Mar 9th
BRIDGEPORT MILLING HEAD Inv # 4850

BRIDGEPORT MILLING HEAD Inv # 4850

  • Farmingdale, New York, United States
  • Mar 9th
Okuma Millac 852V CNC Vertical Machining Center, 2008

Okuma Millac 852V CNC Vertical Machining Center, 2008

  • Watertown, Connecticut, United States
  • Mar 9th
FPT Dino 5-Axis CNC Double Column Machining Center, 2004

FPT Dino 5-Axis CNC Double Column Machining Center, 2004

  • Watertown, Connecticut, United States
  • Mar 9th
Standing Seam Metal Roof Hem Tool

Standing Seam Metal Roof Hem Tool

  • Hedgesville, West Virginia, United States
  • Mar 9th
TAPCO BRAKE BUDDY WITH CASE 11151

TAPCO BRAKE BUDDY WITH CASE 11151

  • Worcester, Massachusetts, United States
  • Mar 9th
Starrett No. 199 15" Master Precision Level

Starrett No. 199 15" Master Precision Level

  • Genoa, Illinois, United States
  • Mar 9th
4 -TAPCO PORT-O-SLITTER CUTTERS

4 -TAPCO PORT-O-SLITTER CUTTERS

  • Romulus, Michigan, United States
  • Mar 9th
Starrett No. 815 Machinist Hammer, Jeweler, Toolmaker

Starrett No. 815 Machinist Hammer, Jeweler, Toolmaker

  • Athol, Massachusetts, United States
  • Mar 9th
Malco FBSN2 Extra Sharp Dual-Barbed 2-1/2-Inch Foamboard Staple -11 pks of 200ea

Malco FBSN2 Extra Sharp Dual-Barbed 2-1/2-Inch Foamboard Staple -11 pks of 200ea

  • Austin, Texas, United States
  • Mar 9th

People who viewed this item also vieved

TIC BILZ TYPE 2 TAP ADAPTER 1/4" PIPE STK 1536

TIC BILZ TYPE 2 TAP ADAPTER 1/4" PIPE STK 1536

  • Wadley, Alabama, United States
  • Jan 30th
ISCAR INDEXABLE DRILL 5/8" SHANK 5.25" OAL DCM 0551 275 063A 5D (LOC1257B)

ISCAR INDEXABLE DRILL 5/8" SHANK 5.25" OAL DCM 0551 275 063A 5D (LOC1257B)

  • Laingsburg, Michigan, United States
  • Jan 30th
ISCAR INDEXABLE DRILL 1.25" SHANK 6.5" OAL DCN 0945 283 125A 3D (LOC1255B)

ISCAR INDEXABLE DRILL 1.25" SHANK 6.5" OAL DCN 0945 283 125A 3D (LOC1255B)

  • Laingsburg, Michigan, United States
  • Jan 30th
BEVERLY SHEAR 2B1A SHEET METAL TOOL

BEVERLY SHEAR 2B1A SHEET METAL TOOL

  • Downingtown, Pennsylvania, United States
  • Jan 30th
2008 Scotchman 5014TM Ironworker

2008 Scotchman 5014TM Ironworker

  • Ankeny, Iowa, United States
  • Jan 30th
3 GREENLEE + SEEKONK ~ Sheet Metal Hole Punch KNOCKOUT: 1 1/4 " 7/8 " 5/8 " USA!!!

3 GREENLEE + SEEKONK ~ Sheet Metal Hole Punch KNOCKOUT: 1 1/4 " 7/8 " 5/8 " USA!!!

  • Fort Mohave, Arizona, United States
  • Jan 30th
1pc Shaviv Ratchet Blade Holder FR Holds Shaviv F Countersink Tools Part #29006

1pc Shaviv Ratchet Blade Holder FR Holds Shaviv F Countersink Tools Part #29006

  • Seminole, Florida, United States
  • Jan 30th
NEW SUNNEN MBB-910-A SPINDLE DRIVE FLAT REPLACEMENT BELT (E,30-90)

NEW SUNNEN MBB-910-A SPINDLE DRIVE FLAT REPLACEMENT BELT (E,30-90)

  • La Puente, California, United States
  • Jan 30th
*NEW* TWO SUNNEN WE-B SHOES 5E

*NEW* TWO SUNNEN WE-B SHOES 5E

  • Buffalo, New York, United States
  • Jan 30th
6" W 18" L Harig 618 SURFACE GRINDER, TOOL STEEL HARDENED WAYS, PMC

6" W 18" L Harig 618 SURFACE GRINDER, TOOL STEEL HARDENED WAYS, PMC

  • Harrison, New Jersey, United States
  • Jan 30th
New Round Carbide Saw Blade sharpener grinder for Wood working/table 110-550mm

New Round Carbide Saw Blade sharpener grinder for Wood working/table 110-550mm

  • Shanghai, China
  • Jan 30th
UNIVERSAL MOUNT FOR CINCINNATI TOOL & CUTTER GRINDER

UNIVERSAL MOUNT FOR CINCINNATI TOOL & CUTTER GRINDER

  • Ellington, New York, United States
  • Jan 30th
South Bend 9 Lathe Model A B Apron Assembly

South Bend 9 Lathe Model A B Apron Assembly

  • Owings, Maryland, United States
  • Jan 30th
South Bend Lathe Milling Attachment Heavy 10 #MA100R

South Bend Lathe Milling Attachment Heavy 10 #MA100R

  • Owings, Maryland, United States
  • Jan 30th
6" South Bend Lathe Works 4-Jaw Chuck 1 1/2"-8 Thread #4006-47 Skinner

6" South Bend Lathe Works 4-Jaw Chuck 1 1/2"-8 Thread #4006-47 Skinner

  • Owings, Maryland, United States
  • Jan 30th
US Machine V-2 1hp Bridgeport Style Milling Machine 9"x36"

US Machine V-2 1hp Bridgeport Style Milling Machine 9"x36"

  • Millstadt, Illinois, United States
  • Jan 30th
NICE LTM Fette TWINCUT FEED Solid Carbide Insert Mill 8" x 1.25" CNC Milling

NICE LTM Fette TWINCUT FEED Solid Carbide Insert Mill 8" x 1.25" CNC Milling

  • Hopkins, Minnesota, United States
  • Jan 30th
Metal Removal 3/8 Carbide 4 Flute Roughing Endmill **NEW**

Metal Removal 3/8 Carbide 4 Flute Roughing Endmill **NEW**

  • Tulsa, Oklahoma, United States
  • Jan 30th
HARDINGE #22 SQUARE COLLET .511" 02091511

HARDINGE #22 SQUARE COLLET .511" 02091511

  • Fox Lake, Illinois, United States
  • Feb 14th
HARDINGE #22 SQUARE COLLET 7/16" 02091510

HARDINGE #22 SQUARE COLLET 7/16" 02091510

  • Fox Lake, Illinois, United States
  • Feb 14th
HARDINGE M87 ROUND FEED FINGER .718" 0209159

HARDINGE M87 ROUND FEED FINGER .718" 0209159

  • Fox Lake, Illinois, United States
  • Feb 14th
Edm Wire CP Ti Gr1HP .011 Fort Wayne Metal 2 spools

Edm Wire CP Ti Gr1HP .011 Fort Wayne Metal 2 spools

  • Converse, Indiana, United States
  • Feb 21st
Brass Holders for EROWA ITS system USED

Brass Holders for EROWA ITS system USED

  • East New Market, Maryland, United States
  • Feb 22nd
System 3R Ruler Kit for Wire EDM

System 3R Ruler Kit for Wire EDM

  • Lake Zurich, Illinois, United States
  • Feb 22nd
10.75" Blade Dia Scotchman CPO 275 Manual *Made in the USA* COLD SAW, 3 differen

10.75" Blade Dia Scotchman CPO 275 Manual *Made in the USA* COLD SAW, 3 differen

  • Harrison, New Jersey, United States
  • Mar 12th
16" W 14" H DoAll C-410-A HORIZONTAL BAND SAW, Auto Shuttle Vise Feed, 10 HP, 1-

16" W 14" H DoAll C-410-A HORIZONTAL BAND SAW, Auto Shuttle Vise Feed, 10 HP, 1-

  • Harrison, New Jersey, United States
  • Mar 12th
Baleigh Band Saw

Baleigh Band Saw

  • Maspeth, New York, United States
  • Mar 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies