Fuji Electric Regenerative Blower; Inlet Size: 1-1/4" (f)npt, Outlet Size: 1-1/4

US $910

  • Homer Glen, Illinois, United States
  • May 30th
Product Details Industrial-duty, oilless air blower can be used for pressure or vacuum. Flows without pulsation at low noise levels and is dynamically balanced to eliminate vibration. Equipped with continuous duty TEFC motor. Use as original equipment or for upgraded performance. Suitable for use in pneumatic air tube conveying systems, vacuum cleaning systems, vacuum lifting, vacuum hold down, vacuum transport, bottle filling stations, printing presses, screen printing, air cushion tables, drying systems, weld fume extraction, textile machinery, dental equipment, waste and water fish pond aeration, aquarium aeration, aeration plating tanks, and air knife systems. For use with air and noncombustible, noncorrosive, nonexplosive gases.  Note: A vacuum or pressure relief valve (sold separately) is required for proper operation. Performance ratings shown are rated with motor running at 60 Hz. If 50 Hz is used, deduct 1/5 from rating. Min. cfm ratings are at continuous flow. Relief valves are mandatory for flow conditions that are under min. or less. Conversions: to psi = (in. of water x 0.036); to in. Hg = (in. of water x 0.074). Technical Specs ItemRegenerative Blower Inlet Size1-1/4" (F)NPT Outlet Size1-1/4" (F)NPT HP0.56 Voltage200-230/460 Phase3 Full Load Amps1.7/.85 Max. Pressure50" WC Max. Flow Rate56 CFM Max. Vacuum45" WC Max. Ambient Temp.104 Degrees F Housing MaterialAluminum Alloy Overall Length10" Overall Height10-1/8" Overall Depth11-5/8" StandardsClass B NEMA Insulation #5Z649SWJ1

Directions

Similar products from Blowers & Ventilators

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies