Gates Sonic Tension Meter model 507c, US $780 – Picture 0

Gates Sonic Tension Meter model 507c, US $780 – Picture 1

Gates Sonic Tension Meter model 507c, US $780 – Picture 2

Gates Sonic Tension Meter model 507c, US $780 – Picture 3

Gates Sonic Tension Meter model 507c, US $780 – Picture 4

Gates Sonic Tension Meter model 507c, US $780 – Picture 5

Gates Sonic Tension Meter Model 507c

US $780

Pittston, Pennsylvania, United States
Jan 29th

Open on mobile:
QR code

Up for bid is a used Gates sonic tension meter. This auction is just for the meter and case and does not include the sensor wire(can be purchased sep) This meter does have some cosmetic wear and has a scratch in the lens(it is not cracked just scratched) It functions perfectly with no issues. Takes 2 AAA batteries(included) These meters run from $600-$800 new. So here's your chance to get a perfectly functioning one for a fraction of the cost.You can read the manual By doing a search for it and there are videos on you tube. Thanks for looking and good luck Correct belt installation tension is essential for optimum performance and reliability or multi-ribbed, V-belt and and synchronous belt drives. The 507C sonic tension meter ensures simple and extremely accurate tension measurement digitally. Technical Characteristics Height 160mm x Depth 26mm x Width 59mm Uses 2x AAA Batteries Suitable for multi-ribbed belts, V-belts and synchronous belts Measurement range: 10Hz to 5,000 Hz Measure accuracy; +/- 1% LCD Screen Backlight Double display possible (Newton and/or Hz) Flexible sensor Cord sensor, inductive sensor and oscillator available on request Stores weight, width and span constants for up to twenty different drive systems Auto gain adjustment function automatically eliminates background noise To save energy, the device shuts off automatically after five minutes of inactivity CE approved RoHS compatible: the device complies with the European Directive (2002/EC on hazardous substances in electrical and electronic equipment. Optional accessories Cord sensor The cord sensor is recommended for measuring tensions at a distance from the tension meter. Inductive sensor The inductive sensor is recommended for measurement, particularly in noisy or windy environments. A steel clip to the back of the belt is required to measure the vibration frequency. Sonic tension meter calibrator – model U-305-OS1 This special calibrator (oscillator) is available for the frequency test of the 507c sonic tension meter. This oscillator generates 5 types of oscillations (sine wave): 25, 90, 500, 2000 and 4000 Hz. It features a frequency accuracy of 0.1% or even lower.

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Does not come with sensor cord. Has a scratch on the lens (see Pic) looks like a crack but it is not cracked. Has wear on a couple of the buttons. But still functions perfectly.”