Gearmotor 12 Volt Vdc 41 Rpm 5/8" High Torque 23 Amps Bodine 42a3bepm-e3

US $69.00

  • Springville, Utah, United States
  • Jan 29th
These gear motors were removed from working industrial prototypes, most of which have less than an hour of use, a few up to 20 hours.  They were used as rotational actuators.  These are excellent actuators or continuous rotational motors, completely sealed (fanless) so they can work in a dirty, industrial or outdoor environment.  Bodine model 42A3BEPM.  The application required an autoreset breaker and phoenix-style plug which are included (see photo).  The breaker is matched to the motor so that if the application locks the motor the breaker will pop before the windings are damaged.  We have inspected each motor and loaded tested them so we know they are in excellent working condition.  Some have chips and scratches that do not impact their ability to function. These are fully reversible and can be used with our without a motor controller.  (A switch and a 12V car battery will work fine.) These things are extremely strong, with 310 pound inches of torque, and they are designed for continuous operation for many years.  We offer a full refund if you are not satisfied. Normally retails for over $400 12V Permanent magnet motor, max 23A Motor produces 1/4 HP, 310 inch-pounds of torque Sealed and fanless with aluminum housing Gearbox ratio 1:60 for shaft speed of 41 RPM Fully reversible Brushes are easy to replace (extra brushes not included) 5/8" keyed shaft (key included, be sure to look in the box if it's not on the shaft) Commonly used as a rotational actuator in automation where high torque and reliability are needed in just about any environmental condition. Unless otherwise requested, we ship these USPS Priority Mail in flat-rate boxes so they get to you quickly. inkFrog Analytics
Condition Seller refurbished :
An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.
Seller Notes Removed from working industrial prototypes with less than 50 hours of use. Carefully inspected, cleaned and load tested. Also included is a 10-amp auto reset breaker and a Phoenix terminal plug (see photos).

Directions

Similar products from Motor with Power Less than 0.5 HP

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies