This is auction is for a Gecko G540 motion control system without the motors. This package features the Gecko G540, enclosure, and our new in house designed power supply featuring 48v 12.5a output, and 120v/220v input, and cooling system. This is a turnkey way to start making chips if you already have your motors. The power supply offered in this package is MASSIVE in output, and supports even 6 axis systems. The system is built, calibrated, and ready for your software installation. Keep in kind this is the only system that offers a 12.5a power supply as standard equipment. You will never need to upgrade when using your G540. this power supply is enough for the largest power hungry system. The devils in the details when building your system so please do the math with what's included, and you will soon see this is a very complete package for the price. Please review the video below first to listen to me cover a system build in detail. I think it will answer most questions, and give you a feel of who, and what your dealing with. Please read the entire auction carefully to see the detail this system offers compared to other vendors. This is the most complete barebones motion control system. The system features screw cap fuse protected IEC port, and auxiliary 120v outlet to power other items requiring 120v. The power switch is illuminated to reflect "on" staus, and minature mushroom E-Stop switch is provided. The system is wired with 16AWG, and (20AWG -E-Stop Switch doesn't receive current)) and each terminal is insulated with heatshrink to provide safety. The wires are secured internally with wire ties for optimal airflow. The enclosure is a full aluminum 12L x 12W x 4H (1.5mm in thickness) unit featuring cooling slots throughout to aid in cooling the system. This is the only chassis system on the market that features a complete cooling system which includes our Sanyo Denki industrial 48v 60mm cooling fan that puts out 60 Cubic Feet Per Minute @ 10,000RPM, and Avvid Thermalloy custom heatsinks. Simply mount them to your Gecko with thermal epoxy. The Gecko can be removed wth the cooling system installed. Simply unscrew 4 screws, and the Gecko is out!. The heatsinks fit the Gecko perfectly so there's no hassle. The Gecko must cooled in an enclosure to prevent overheating, and possible damage. Refer to this link to reviews Gecko's Heatsink Experiment http://www.geckodrive.com/g540-heatsinking Be cautious if you purchase a system without a cooling solution. The power supply included will easily support a 4 axis system, however if you want to customize your system please message me for options. Please refer to Gecko Drives tutorial on selecting a power supply http://www.geckodrive.com/support/step-motor-basics/power-supply-basics.html You should have a model that will power your system correctly, however spending more for a larger model that's providing excess power you will never utilize is really a waste of money. To complete the package 3 6ft premade shielded 300v 80c motor cables, Parallel Port DB25 cable, and IEC power cord. This motor cable package is easily $50 extra from other vendors, or they make you build your own. This package is plug, and play when you solder on the DB9 connector to your motors. ** If you plan on hooking up additional items ( IE home switches additional E-stops, torch controllers) to your system you may require a power distribution bar. This one I designed is tool less, and provides ultimate simplicity in installation, and servicing your components. **Review it here http://www.ebay.com/itm/CNC-Tool-less-9-Terminal-Power-Distribution-Bus-Bar-/141685998963?ssPageName=STRK:MESE:IT The typical build time on these units is no more than 10 days. Please remember each system is hand assembled, and calibrated with a TRUE RMS Klein CL-2000 Voltmeter to assure the unit is virtually turnkey out of the box. The pictures directly show that all details were covered. This system will satisfy the hobbiest to the professional at a cost that's less than you purchasing the items seperately anywhere, and fabricating it yourself using the same components. Shipping in the US is $10.85 International shipping is welcome with adjusted shipping rate. Pelase message me prior to purchasing for a quote. I insure all motion controllers as standard. They will require signature due at delivery due to there value. Please take your time, and read the entire auction carefully to see the detail this system offers compared to other vendors The system features fuse protected screw cap IEC port, and auxiliary 120v outlet to power other items requiring 120v. The power switch is illuminated to reflect "on" status, and miniature mushroom E-Stop switch is provided. The system is wired with 16AWG, and (20AWG -E-Stop Switch doesn't receive current)) and each terminal is insulated with heatshrink to provide safety. The wires are secured internally with wire ties for optimal airflow. The enclosure is a full aluminum (1.5mm in thickness) unit featuring cooling slots throughout to aid in cooling the system. This package also includes the complete cooling system for your G540 which includes our Avvid Thermalloy custom heatsinks , and Sanyo industrial 60mm cooling fan that puts out 60 Cubic Feet per Minute @ 10,000RPM! The cooling system installed in this system allows for removal of the Gecko WITHOUT having to remove the fan or, heatsinks for ease of maintenance. Unscrew 4 screws, and the Gecko is out!. The Gecko must be cooled in an enclosure to prevent overheating, and possible damage. Refer to this link to review Gecko's Heatsink Experiment http://www.geckodrive.com/g540-heatsinking Be cautious if you purchase a system without a proper cooling solution. Please refer to Gecko Drives tutorial on selecting a power supply http://www.geckodrive.com/support/step-motor-basics/power-supply-basics.html You should have a model that will power your system correctly, however spending more for a larger model that's providing excess power you will never utilize is really a waste of money. 48v 12.5a version is included in the price listed in the "Buy It Now" The typical build time is no more than 10 days, however at times can exceed 13 days. I don't neglect my quality to make sales. Please consider this prior to ordering. Each system is tested , and calibrated prior to shipment. This is a completely hand built system. Also included to complete this motion controller package is 3 10ft DB9 shielded motor cables. rated to 300v 80c, Tripp Lite IEC power cord, DB25, Parallel cable You will have to provide your own motors. The pictures directly show that all details were covered. This system will satisfy the hobbiest to the professional at a cost that's less than you purchasing the items seperately anywhere, and fabricating it yourself using the same components.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
