+ Post new Ad
Gorbel 1 Ton Floor Supported,Crane System,20' bridge,43' runway,12' under bridge, US $12,979.00 – Picture 0
Gorbel 1 Ton Floor Supported,Crane System,20' bridge,43' runway,12' under bridge, US $12,979.00 – Picture 0

Gorbel 1 Ton Floor Supported,crane System,20' Bridge,43' Runway,12' Under Bridge

US $12,979.00

  • Fishers, New York, United States
  • Jan 30th
Open on mobile:
QR code
Gorbel 1 Ton Capacity Floor supported Crane System This is a brand new Gorbel 2000 Pound floor supported crane system. Complete with all uprights , headers, bridge, stack section and all components.  Other weight capacities,up to 4,000 pounds, bridge and runway sizes are available. contact us at 610-759-8500 or e-mail us through e bay for a quotation. This unit will require manufacture time of 10-15- days. Total weight on this system is 4,732 pounds and can be shipped freight collect or we can provide you with a freight quote. Just e mail us your Zip Code. or call 610-759-8500 for more information. Be sure to visit our e bay store for other great products.  
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Gorbel

Directions

Similar products from Other Woodworking Equipment & Machines

Build Your Sign Design, signage G code for your CNC Router coupons available

Build Your Sign Design, signage G code for your CNC Router coupons available

  • Central Lake, Michigan, United States
  • Jan 30th
Delta Dust Collector model 50-720

Delta Dust Collector model 50-720

  • House Springs, Missouri, United States
  • Jan 30th
14 in Delta Milwaukee 33-400 radial arm saw 24in rip woodworking RAS saw

14 in Delta Milwaukee 33-400 radial arm saw 24in rip woodworking RAS saw

  • DeKalb, Illinois, United States
  • Jan 30th
NEW MCMASTER CARR 1788K41 ALUMINUM BLAST GATE WITH SLIDE FOR 2" DUCT DIAMETER

NEW MCMASTER CARR 1788K41 ALUMINUM BLAST GATE WITH SLIDE FOR 2" DUCT DIAMETER

  • Apache Junction, Arizona, United States
  • Jan 30th
434 Overarm Router Ekstrom Carlson 28 inch 24x36 table 5hp

434 Overarm Router Ekstrom Carlson 28 inch 24x36 table 5hp

  • DeKalb, Illinois, United States
  • Jan 30th
Janssens Hot Air Edgebander, FEBPNTH, 1mm Pre-glued Tape Cap. Cleaned / Checked

Janssens Hot Air Edgebander, FEBPNTH, 1mm Pre-glued Tape Cap. Cleaned / Checked

  • Sheboygan, Wisconsin, United States
  • Jan 30th
UP TO 2 DEL-TRON POSITION LINEAR PRECISION 1 1/2" BALL SLIDE N-2 FREE SHIPPING

UP TO 2 DEL-TRON POSITION LINEAR PRECISION 1 1/2" BALL SLIDE N-2 FREE SHIPPING

  • Rochester, New York, United States
  • Jan 30th
Jet stik flame rock carving tool

Jet stik flame rock carving tool

  • Ottawa, Ontario, Canada
  • Jan 30th
**FREE BITS** Conquest 2-46 Dual Line Boring Machine 460V/3PH

**FREE BITS** Conquest 2-46 Dual Line Boring Machine 460V/3PH

  • Bonita Springs, Florida, United States
  • Jan 30th
RUCKLE 90? GERMAN VENEER GUILLOTINE INCLUDES 4 BLADES

RUCKLE 90? GERMAN VENEER GUILLOTINE INCLUDES 4 BLADES

  • Naperville, Illinois, United States
  • Jan 30th
Fleetlife FA 191548 Dust Collection Filter FREE SHIPPING

Fleetlife FA 191548 Dust Collection Filter FREE SHIPPING

  • Twin Falls, Idaho, United States
  • Jan 30th
YAMAZAKI MAZAK OPTONICS CORPORATION MACHINERY TAG PLATE SUPER TURBO- X612

YAMAZAKI MAZAK OPTONICS CORPORATION MACHINERY TAG PLATE SUPER TURBO- X612

  • Elizabethton, Tennessee, United States
  • Jan 30th
NEW American Air Filter AAF A-1 Dynapure 1/3hp 25cfm oil mist collector

NEW American Air Filter AAF A-1 Dynapure 1/3hp 25cfm oil mist collector

  • Mentor, Ohio, United States
  • Jan 30th
18" Cast aluminum blast gate

18" Cast aluminum blast gate

  • Francis Creek, Wisconsin, United States
  • Jan 30th
Goethel Blast gate 5" inch OD outer diameter

Goethel Blast gate 5" inch OD outer diameter

  • Francis Creek, Wisconsin, United States
  • Jan 30th
Keller Luft-Technik Dust Collector off Trumpf Laser

Keller Luft-Technik Dust Collector off Trumpf Laser

  • Milwaukee, Wisconsin, United States
  • Jan 30th
DUST COLLECTOR TEE WYE BRANCH MURPHY RODGERS HEAVY DUTY 7" Welded Steel 03D2

DUST COLLECTOR TEE WYE BRANCH MURPHY RODGERS HEAVY DUTY 7" Welded Steel 03D2

  • Fountain Valley, California, United States
  • Jan 30th
DUST COLLECTOR PANT TEE WYE BRANCH MURPHY RODGER HEAVY UTY 5" Welded Steel 03D2

DUST COLLECTOR PANT TEE WYE BRANCH MURPHY RODGER HEAVY UTY 5" Welded Steel 03D2

  • Fountain Valley, California, United States
  • Jan 30th
DUST COLLECTOR 90^ ELBOW MURPHY RODGERS HEAVY DUTY 9" Welded Steel 03D2

DUST COLLECTOR 90^ ELBOW MURPHY RODGERS HEAVY DUTY 9" Welded Steel 03D2

  • Fountain Valley, California, United States
  • Jan 30th
ORMA Macchine Hot Press NPC Type Euro Oleodynamic Presses

ORMA Macchine Hot Press NPC Type Euro Oleodynamic Presses

  • Pilot Rock, Oregon, United States
  • Jan 30th

People who viewed this item also vieved

Pistorius Industrial Pneumatic Saw - 12 inch Saw

Pistorius Industrial Pneumatic Saw - 12 inch Saw

  • Columbus, Ohio, United States
  • May 29th
Original Rear Trunnion Tilt Bracket ROCKWELL UNISAW very nice

Original Rear Trunnion Tilt Bracket ROCKWELL UNISAW very nice

  • Kingsburg, California, United States
  • May 29th
Dewalt 153596-01 DW708 Crosscut Miter Saw Torsion Spring

Dewalt 153596-01 DW708 Crosscut Miter Saw Torsion Spring

  • Middlebury, Indiana, United States
  • May 29th
17-881 - Delta Or Rockwell #2 Morse Taper Spindle With Bearings

17-881 - Delta Or Rockwell #2 Morse Taper Spindle With Bearings

  • Holly, Michigan, United States
  • May 30th
JET J-A2608-2 220V 3Ph 20-inch Arboga Gear Head Drill Press New

JET J-A2608-2 220V 3Ph 20-inch Arboga Gear Head Drill Press New

  • Ferndale, Washington, United States
  • May 30th
10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-150RP 150 Grit

10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-150RP 150 Grit

  • Tampa, Florida, United States
  • May 31st
10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-180RP 180 Grit

10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-180RP 180 Grit

  • Tampa, Florida, United States
  • May 31st
10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-220RP 220 Grit

10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-220RP 220 Grit

  • Tampa, Florida, United States
  • May 31st
Hardinge Percision C&C Machine

Hardinge Percision C&C Machine

  • Red Hill, Pennsylvania, United States
  • Jun 1st
Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0181

Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0181

  • Novosibirsk, Russian Federation
  • Jun 15th
Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0157

Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0157

  • Великий Устюг, Вологодская обл., Russian Federation
  • Jun 15th
Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0156

Panno 3d Model STL for CNC Router Engraver Machine Relief Artcam 0156

  • Великий Устюг, Вологодская обл., Russian Federation
  • Jun 15th
Oliver 20 Pattern makers wood lathe, 24" swing x 108" useable length

Oliver 20 Pattern makers wood lathe, 24" swing x 108" useable length

  • Evergreen, Colorado, United States
  • Oct 22nd
Antique 1930 - 1940 Mounted Cast Iron Frame Dunlap Lathe With Gauges and Books

Antique 1930 - 1940 Mounted Cast Iron Frame Dunlap Lathe With Gauges and Books

  • Clayton, Delaware, United States
  • Oct 22nd
Shopsmith lathe duplicator

Shopsmith lathe duplicator

  • West Simsbury, Connecticut, United States
  • Oct 23rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies