+ Post new Ad
**GREAT COND** KITAGAWA PRECISION INDEXER 8" PLATE TECNARA 4TH & 5TH AXIS, US $3900 – Picture 0
**GREAT COND** KITAGAWA PRECISION INDEXER 8" PLATE TECNARA 4TH & 5TH AXIS, US $3900 – Picture 0

**great Cond** Kitagawa Precision Indexer 8" Plate Tecnara 4th & 5th Axis

US $3900

  • Bensenville, Illinois, United States
  • Jun 1st
Open on mobile:
QR code
You are looking at a very good condition, low hours, trunion type, 4th axis and 5th axis precision indexer. This indexer came off a Mazak, FJV 20 vertical machining center. It is in my aerospace certified machine shop where we run mainly aluminum, prototype and short run production aircraft parts.   Usually the indexer held very complex housings that were machined with very high speed, miniature carbide tools. This indexer is in very good condition and it looks almost new.  It has an 8 inch diameter face plate and this also looks almost new. No dings, no scratches.  When we were machining in a fixture or vise, the indexer was kept  off the machine and on the bench. Unfortunately, the Mazaks 35,000 rpm spindle failed and we are selling the entire machine for parts. We have many more parts to sell, also at big discounts. If you have any questions call me at (630) 400-4769.

Directions

Similar products from Rotating Tables

NIKKEN KOSAKUSHO CNC-400 VF 16" 4th-AXIS HORIZONTAL/VERTICAL POWER ROTARY TABLE

NIKKEN KOSAKUSHO CNC-400 VF 16" 4th-AXIS HORIZONTAL/VERTICAL POWER ROTARY TABLE

  • Buffalo, New York, United States
  • Jun 2nd
Yuasa CNC Rotary Indexer with Programmable Controller

Yuasa CNC Rotary Indexer with Programmable Controller

  • Lombard, Illinois, United States
  • Jun 2nd
HAAS S5C HA5C 14 PIN INDEXER AND RED SERVO CONTROLLER

HAAS S5C HA5C 14 PIN INDEXER AND RED SERVO CONTROLLER

  • Lowell, Massachusetts, United States
  • Jun 2nd
EIMELDINGEN 25" POWER TILT & TURN ROTARY TABLE W/ DRO

EIMELDINGEN 25" POWER TILT & TURN ROTARY TABLE W/ DRO

  • Fullerton, California, United States
  • Jun 2nd
DeVlieg Air Lift Index

DeVlieg Air Lift Index

  • Bridgeport, Connecticut, United States
  • Jun 2nd
4th Axis CNC Rotary Table Full Fourth Axis Centroid RT-200

4th Axis CNC Rotary Table Full Fourth Axis Centroid RT-200

  • Vancouver, Washington, United States
  • Jun 1st
SMW RT 160 PY Rotary Indexer CNC 4th Axis Rotary Table

SMW RT 160 PY Rotary Indexer CNC 4th Axis Rotary Table

  • Vancouver, Washington, United States
  • Jun 1st
ERON No. 308 CROSSLIDE ROTARY TABLE 8INCH DIAMETER

ERON No. 308 CROSSLIDE ROTARY TABLE 8INCH DIAMETER

  • Quebec, Quebec, Canada
  • Jun 1st
TSUDAKOMA RZ160 INDEXER, ROTARY TABLE, WITH CONTROL TPC JR

TSUDAKOMA RZ160 INDEXER, ROTARY TABLE, WITH CONTROL TPC JR

  • Aurora, Illinois, United States
  • Jun 1st
3" PRECISION TILTING ROTARY TABLE, Part#TTSK-75- NEW

3" PRECISION TILTING ROTARY TABLE, Part#TTSK-75- NEW

  • Madison Heights, Michigan, United States
  • Jun 1st
NICE! YUASA 10" HORIZONTAL / VERTICAL ROTARY TABLE - #550-050

NICE! YUASA 10" HORIZONTAL / VERTICAL ROTARY TABLE - #550-050

  • El Monte, California, United States
  • Jun 1st
The 4" adapter, 3 jaw chuck and 4" rotary table ( table included )

The 4" adapter, 3 jaw chuck and 4" rotary table ( table included )

  • Norcross, Georgia, United States
  • Jun 1st
Haas HRT-310 Programmable Rotary Table (Brush Drive)

Haas HRT-310 Programmable Rotary Table (Brush Drive)

  • Minneapolis, Minnesota, United States
  • Jun 1st
MACHINIST TOOLS LATHE MILL 12" Index Indexing Rotary Table

MACHINIST TOOLS LATHE MILL 12" Index Indexing Rotary Table

  • Morris Plains, New Jersey, United States
  • Jun 1st
BRIDGEPORT MILLING 15" ROTARY TABLE ***XLNT***

BRIDGEPORT MILLING 15" ROTARY TABLE ***XLNT***

  • Highland, New York, United States
  • Jun 1st
VERTEX V-CS-6 Super Indexing Spacer with plates

VERTEX V-CS-6 Super Indexing Spacer with plates

  • Bremen, Indiana, United States
  • Jun 1st
MILLING DRILLING DIVIDING PLATE FIXTURE FOR ROTARY CIRCLE 3 JAW KEYLESS CHUCK

MILLING DRILLING DIVIDING PLATE FIXTURE FOR ROTARY CIRCLE 3 JAW KEYLESS CHUCK

  • McCordsville, Indiana, United States
  • Jun 1st
ADJUSTABLE TAILSTOCK FOR 4-6" ROTARY TABLES (3900-2407) - MADE IN TAIWAN

ADJUSTABLE TAILSTOCK FOR 4-6" ROTARY TABLES (3900-2407) - MADE IN TAIWAN

  • Chino, California, United States
  • Jun 1st
MACHINIST LATHE MILL Machinist Phase II 8" Horizontal Verticle Table for Mill

MACHINIST LATHE MILL Machinist Phase II 8" Horizontal Verticle Table for Mill

  • Morris Plains, New Jersey, United States
  • Jun 1st
TROYKE 18” Horizontal Rotary Table

TROYKE 18” Horizontal Rotary Table

  • Euclid, Ohio, United States
  • Jun 1st

People who viewed this item also vieved

ROHM KFD-HS 250/3 3400/MIN 3 JAW LATHE POWER CHUCK

ROHM KFD-HS 250/3 3400/MIN 3 JAW LATHE POWER CHUCK

  • Clover, South Carolina, United States
  • Jan 30th
15" Hydraulic Chuck Dongwoo DS80005 3 mm serration jaws used on Mori Seiki SL-4

15" Hydraulic Chuck Dongwoo DS80005 3 mm serration jaws used on Mori Seiki SL-4

  • Camarillo, California, United States
  • Jan 30th
ROHM KFD-HS 250/3 5000/MIN 3 JAW LATHE POWER CHUCK

ROHM KFD-HS 250/3 5000/MIN 3 JAW LATHE POWER CHUCK

  • Clover, South Carolina, United States
  • Jan 30th
Starrett T-Handle Tap Wrench No 93A In Box Capacity 1/16" to 5/32" Square

Starrett T-Handle Tap Wrench No 93A In Box Capacity 1/16" to 5/32" Square

  • Brighton, Michigan, United States
  • Jan 30th
Industrial Cleco 3H Sheet Metal Riveting Clamp Fastener Installation Tool Lot

Industrial Cleco 3H Sheet Metal Riveting Clamp Fastener Installation Tool Lot

  • Romulus, Michigan, United States
  • Jan 30th
DE-STA-CO Clamp & Cleco 3H & Misc Sheet Metal Riveting Clamp Fastener Tool Lot

DE-STA-CO Clamp & Cleco 3H & Misc Sheet Metal Riveting Clamp Fastener Tool Lot

  • Romulus, Michigan, United States
  • Jan 30th
MT3 1/2 INCH ROUND COLLET

MT3 1/2 INCH ROUND COLLET

  • Chino, California, United States
  • Jan 30th
BAR STOCK PULLER B1 COLLET PADS 1/32 RD STEEL #53025

BAR STOCK PULLER B1 COLLET PADS 1/32 RD STEEL #53025

  • Resaca, Georgia, United States
  • Jan 30th
ER25 COLLET LIVE TOOL HOLDER

ER25 COLLET LIVE TOOL HOLDER

  • Chino, California, United States
  • Jan 30th
HARDINGE 6" BACK PLATE MODEL C25 W/ TAPER LOCK MOUNT

HARDINGE 6" BACK PLATE MODEL C25 W/ TAPER LOCK MOUNT

  • Ellington, New York, United States
  • Jan 30th
HEAVY DUTY CAST IRON TAIL STOCK ADJUSTABLE CENTER HEIGHT 4-1/2"- 6"

HEAVY DUTY CAST IRON TAIL STOCK ADJUSTABLE CENTER HEIGHT 4-1/2"- 6"

  • Ellington, New York, United States
  • Jan 30th
HEAVY DUTY CAST IRON TAIL STOCK ADJUSTABLE CENTER HEIGHT 4-3/4"- 5-1/2"

HEAVY DUTY CAST IRON TAIL STOCK ADJUSTABLE CENTER HEIGHT 4-3/4"- 5-1/2"

  • Ellington, New York, United States
  • Jan 30th
Kurt 4" hard steel milled vise jaws

Kurt 4" hard steel milled vise jaws

  • Blue Bell, Pennsylvania, United States
  • Jan 30th
Kurt 4" hard steel ground vise jaws with 3/8-16 hardware

Kurt 4" hard steel ground vise jaws with 3/8-16 hardware

  • Blue Bell, Pennsylvania, United States
  • Jan 30th
MILLNG VISE STOP machinist tools Bridgeport **FREE SHIPPING** *11

MILLNG VISE STOP machinist tools Bridgeport **FREE SHIPPING** *11

  • Thomaston, Connecticut, United States
  • Jan 30th
LEVIN 10mm Arbor for Tapped Face Plate, Watchmaker's Jeweler's Lathe

LEVIN 10mm Arbor for Tapped Face Plate, Watchmaker's Jeweler's Lathe

  • La Habra, California, United States
  • Feb 13th
BRUCKER EXTRA HEAVY DUTY LIVE CENTER

BRUCKER EXTRA HEAVY DUTY LIVE CENTER

  • Roxbury, Connecticut, United States
  • Feb 13th
Rotor 5ST MT-5 Type N 60 Degree Main Line Live Center New Unused Switzerland

Rotor 5ST MT-5 Type N 60 Degree Main Line Live Center New Unused Switzerland

  • Syracuse, Indiana, United States
  • Feb 13th
T-Slot Bolt 3/8" x 2 3/4"

T-Slot Bolt 3/8" x 2 3/4"

  • Scottsboro, Alabama, United States
  • Feb 15th
SNAP JAWS Quick Change Hard Step Vise Jaws - Model .: 6HSJ-740 Chuck Size: 6"

SNAP JAWS Quick Change Hard Step Vise Jaws - Model .: 6HSJ-740 Chuck Size: 6"

  • Fairview, Pennsylvania, United States
  • Feb 15th
RENISHAW RP3 PROBE / REMOVABLE ARM & BASE - TOOL SETTING FOR TURNING CENTERS

RENISHAW RP3 PROBE / REMOVABLE ARM & BASE - TOOL SETTING FOR TURNING CENTERS

  • Roanoke, Virginia, United States
  • Feb 15th
Five pairs of machinest parallel bars plus charts and booklets

Five pairs of machinest parallel bars plus charts and booklets

  • Denville, New Jersey, United States
  • Mar 26th
Enco Model 418-4950 2" Tilting Vee Block

Enco Model 418-4950 2" Tilting Vee Block

  • Garden City, Idaho, United States
  • Mar 26th
Shop Made Machinist's Vee V-Block ToolMaker Fixture Vise GRINDING GUNSMITH

Shop Made Machinist's Vee V-Block ToolMaker Fixture Vise GRINDING GUNSMITH

  • Waterbury, Connecticut, United States
  • Mar 26th
Collets, 5C Brass & Nylon Machinists Emergency Collets (New Old Stock)

Collets, 5C Brass & Nylon Machinists Emergency Collets (New Old Stock)

  • Saunderstown, Rhode Island, United States
  • May 27th
5C MANUAL COLLET CHUCK TYPE B #225-202B HORIZONAL / VERETICAL U565

5C MANUAL COLLET CHUCK TYPE B #225-202B HORIZONAL / VERETICAL U565

  • Montville, Ohio, United States
  • May 28th
Hardinge 16C A2-5 Extra Depth Step Chuck Closer

Hardinge 16C A2-5 Extra Depth Step Chuck Closer

  • Wooster, Ohio, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies