Greenlee Gator Plus 22gl High Power Crimping Tool

US $550

Houston, Texas, United States
Jun 20th

Open on mobile:
QR code

Greenlee Gator Plus EK 22GL lightly used Length............................................................................................ 314 mm (12-3/8") Width......................................................................................................... 76 mm (3") Height............................................................................................. 298 mm (11-3/4") Mass/Weight (with battery)...................................................................4.4 kg (9.7 lb) Sound Level............................................................................... 75 dB (A) at 1 meter Vibration..................................................................................................... < 2.5 m/s2 Motor Type........................................................................DC permanent field motor Motor Voltage................................................................................................. 12 VDC Hydraulic Oil....................................................... 50 ml (0.1 pint) of Shell Tellus® T 15 Crimping Capacities Maximum Cable Size....................................600 kcmil copper; 350 kcmil aluminum Crimping Force................................................................................. 55 kN (6.2 tons) Average Crimps per Charge..........................................................approximately 120 Battery Charging Voltage................................................................................................. 12 V Charging Time.................................................................................................. 1 hour Installing K22, KA22, and KC22-type Dies 1. Select the proper dies for the intended crimp. 2. Push the die release button. 3. Slide the die into the crimping head until it “snaps” into place. 4. Properly position the second die. Repeat Steps 2 and 3. Installing W-type Installing W-type Dies 1. Push the die release button. 2. Slide the die adapter (Greenlee part number 500 4292.0) into crimping head until it “snaps” into place. Note: The die adapters have the “D3” die profile. No additional dies are needed if the connector to be crimped requires a “D3” die. 3. Repeat for the other adapter. 4. Select the proper dies for the intended crimp. 5. Press the locking flange and open the crimping head. 6. Push the W-type die detent and slide the W-type die into place. 7. Properly position the second die. Repeat Steps 5-6 I COMBINE SHIPMENT WHEN POSSIBLE