+ Post new Ad
Grippall CNC Lathe Bar Puller FITS CNC LATHE CHUCK USA MADE, US $345.00 – Picture 0
Grippall CNC Lathe Bar Puller FITS CNC LATHE CHUCK USA MADE, US $345.00 – Picture 0

Grippall Cnc Lathe Bar Puller Fits Cnc Lathe Chuck Usa Made

US $345.00

  • Columbus, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
Self adjusting Coolant or Air Actuated Bar Puller Standard with all GRIPPALL 1" shank Bar Pullers are a set of 4 hard steel fingers with screws. Gripping Range; 1/8 to 2 1/2 first setting 3/4 to 3 1/8 second setting 15 p.s.i. enough to pull 200 lb. bar. Actuated by coolant or compressed air. Why Use a Grippall CNC Bar Puller They Provide a simple, inexpensive method for automating any CNC lathe. Quality design, Made of Stainless steel and anodized air craft aluminum Bar pullers dont use up valuable floor space They are very easy to set up and use - no electrical interface required Maintenance free operation They can be easily moved from one machien to another A wide gripping range is obtained from a very compact design Use bar puller as a part picker so finished work piece does not get damaged Costs much less then a bar feed Also Stocking 2, 3, and 4 finger bar pullers, However if not requested 4 finger will be shipped $25.00 Shipping Inside Continental 48 United States. Alaska & Hawaii & International buyers pay priority cost. We require a physical address on all items Sorry NO P.O. Box. 575 N. Hague Ave. Columbus, Ohio. 43204 Phone # 1-800-543-5998 After purchasing, pay instantly with your credit card through PayPal!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture United States
MPN GA1000-1-4F

Directions

Similar products from Collet Chucks & Sets

High speed spindle air tubine 15000 to 40000 rpm cat 40

High speed spindle air tubine 15000 to 40000 rpm cat 40

  • Huntington, Indiana, United States
  • Jan 30th
NEW Kennametal Modular Collet Chucks; MFR 2384711; KM63UTTG100100

NEW Kennametal Modular Collet Chucks; MFR 2384711; KM63UTTG100100

  • Whittier, California, United States
  • Jan 30th
Universal Engineering Acura Flex 9400014 - 19/32" - 1-5/8" Collet Chuck

Universal Engineering Acura Flex 9400014 - 19/32" - 1-5/8" Collet Chuck

  • Arlington, Texas, United States
  • Jan 30th
PRO-SERIES HSK100AX100 ER-32 COLLET CHUCK (3901-6030)

PRO-SERIES HSK100AX100 ER-32 COLLET CHUCK (3901-6030)

  • Chino, California, United States
  • Jan 30th
VALENITE DA180 COLLET CHUCK EXTENSION VE-1250 STK1353

VALENITE DA180 COLLET CHUCK EXTENSION VE-1250 STK1353

  • Wadley, Alabama, United States
  • Jan 30th
KENNAMETAL DA100 COLLET CHUCK EXTENSION SS100 DA10 4731 STK1354

KENNAMETAL DA100 COLLET CHUCK EXTENSION SS100 DA10 4731 STK1354

  • Wadley, Alabama, United States
  • Jan 30th
STS CNC CT50 20mm Shell Mill Adapter Tool CV50SM20MM700

STS CNC CT50 20mm Shell Mill Adapter Tool CV50SM20MM700

  • Leander, Texas, United States
  • Jan 30th
STS CNC CT-50 3/4" Stub Arbor Adapter Tool CV50SA075700

STS CNC CT-50 3/4" Stub Arbor Adapter Tool CV50SA075700

  • Leander, Texas, United States
  • Jan 30th
Command Cat 45 Extended TG100 Collet Holder C5C5-1000

Command Cat 45 Extended TG100 Collet Holder C5C5-1000

  • Flint, Michigan, United States
  • Jan 30th
5C Collet Holder

5C Collet Holder

  • Campbell, California, United States
  • Jan 30th
KENNAMETAL/ERICKSON DA100 COLLET CHUCK EXTENSION 2-10-067-101

KENNAMETAL/ERICKSON DA100 COLLET CHUCK EXTENSION 2-10-067-101

  • Wadley, Alabama, United States
  • Jan 30th
Erickson NPA075 Collet Chuck Nut Machinist Tool

Erickson NPA075 Collet Chuck Nut Machinist Tool

  • Garden Grove, California, United States
  • Jan 30th
Kennametal LNA075M Collet Chuck Nut Machinist Tool

Kennametal LNA075M Collet Chuck Nut Machinist Tool

  • Garden Grove, California, United States
  • Jan 30th
Kennametal LNSER25M COllet Chuck NUT NEW Machinist Tool

Kennametal LNSER25M COllet Chuck NUT NEW Machinist Tool

  • Garden Grove, California, United States
  • Jan 30th
Erickson Quick Change Collet Chuck Nut NPA100 NEW Machinist Tool

Erickson Quick Change Collet Chuck Nut NPA100 NEW Machinist Tool

  • Garden Grove, California, United States
  • Jan 30th
Kennametal LNSER32M Collet Chuck NUT Machinist Tool

Kennametal LNSER32M Collet Chuck NUT Machinist Tool

  • Garden Grove, California, United States
  • Jan 30th
TSD UNIVERSAL KWIK-SWITCH II AUTO NUT, P/N 805044~400 TAPER

TSD UNIVERSAL KWIK-SWITCH II AUTO NUT, P/N 805044~400 TAPER

  • El Cajon, California, United States
  • Jan 30th
ASAHI 52-55 SPANNER PIN HOOK STYLE WRENCH FOR CNC MILL TOOLING

ASAHI 52-55 SPANNER PIN HOOK STYLE WRENCH FOR CNC MILL TOOLING

  • Chino, California, United States
  • Jan 30th
CNC Gang Lathe, Dynapath Control - 5C Collet Chuck

CNC Gang Lathe, Dynapath Control - 5C Collet Chuck

  • Normal, Illinois, United States
  • Jan 30th
jacobs model 96-05 rubberflex chuck & arbor and complete set of collets

jacobs model 96-05 rubberflex chuck & arbor and complete set of collets

  • Bethpage, New York, United States
  • Jan 30th

People who viewed this item also vieved

ROYAL 10909 Pipe And Bull Head Live Center-Taper:5 MT

ROYAL 10909 Pipe And Bull Head Live Center-Taper:5 MT

  • Duncan, South Carolina, United States
  • Jun 7th
ROYAL 10910 Pipe And Bull Head Live Center-Taper:6 MT

ROYAL 10910 Pipe And Bull Head Live Center-Taper:6 MT

  • Duncan, South Carolina, United States
  • Jun 7th
ROYAL 10905 Pipe And Bull Head Live Center-Taper:5 MT

ROYAL 10905 Pipe And Bull Head Live Center-Taper:5 MT

  • Duncan, South Carolina, United States
  • Jun 7th
5" Precision Hardened and ground Sine Bar in Wooden Case VERY NICE!!!! fowler?

5" Precision Hardened and ground Sine Bar in Wooden Case VERY NICE!!!! fowler?

  • Hadley, Pennsylvania, United States
  • Jun 7th
Nice!! 12"x8"x5" Machine Riser Block Heavy Duty

Nice!! 12"x8"x5" Machine Riser Block Heavy Duty

  • San Bernardino, California, United States
  • Jun 7th
28.25" x 22.375" x 4.75 Steel Weld T-Slotted Table Cast iron Layout Plate Weld

28.25" x 22.375" x 4.75 Steel Weld T-Slotted Table Cast iron Layout Plate Weld

  • Grand Rapids, Michigan, United States
  • Jun 7th
Hardinge 23/64" # 5C Collet with internal Threads Unit # 2

Hardinge 23/64" # 5C Collet with internal Threads Unit # 2

  • Coventry, Rhode Island, United States
  • Jun 9th
Hardinge 23/64 NEW # 5C Collet with Internal Threads Unit # 1

Hardinge 23/64 NEW # 5C Collet with Internal Threads Unit # 1

  • Coventry, Rhode Island, United States
  • Jun 9th
Hardinge 3/8 # 5C Collet with internal Threads Unit # 5

Hardinge 3/8 # 5C Collet with internal Threads Unit # 5

  • Coventry, Rhode Island, United States
  • Jun 9th
Vintage Machinist Machinery Tools! 2 PARALLEL CLAMPS! MODEL 4481

Vintage Machinist Machinery Tools! 2 PARALLEL CLAMPS! MODEL 4481

  • New York, New York, United States
  • Jun 9th
Jewel 5M Long Turn Elbow Right Angle Chain Pipe Vise Welding Clamp 2 1/2" to 8"

Jewel 5M Long Turn Elbow Right Angle Chain Pipe Vise Welding Clamp 2 1/2" to 8"

  • Grand Rapids, Michigan, United States
  • Jun 9th
KANT-TWIST & STRONG ARM UNIVERSAL CLAMPS, Lot Of 9, NO RESERVE!

KANT-TWIST & STRONG ARM UNIVERSAL CLAMPS, Lot Of 9, NO RESERVE!

  • Belmont, Massachusetts, United States
  • Jun 9th
SPI Magnetic Vice

SPI Magnetic Vice

  • Montebello, California, United States
  • Jun 9th
Circuit Board Holder/Vise with Heavy Base

Circuit Board Holder/Vise with Heavy Base

  • Nipomo, California, United States
  • Jun 9th
The Chas. Parker Co. 974 Meriden CT Bench Machinist Blacksmith Vice_Charles USA

The Chas. Parker Co. 974 Meriden CT Bench Machinist Blacksmith Vice_Charles USA

  • Le Roy, New York, United States
  • Jun 9th
Allison Model 200 8” Metel Lathe Chuck 3 Jaw

Allison Model 200 8” Metel Lathe Chuck 3 Jaw

  • Independence, Kentucky, United States
  • Jun 9th
3 jaw 10 inch chuck

3 jaw 10 inch chuck

  • Maryville, Tennessee, United States
  • Jun 9th
D1-6 cushman 3 jaw chuck

D1-6 cushman 3 jaw chuck

  • Maryville, Tennessee, United States
  • Jun 9th
Lot of 3 - Uncoated 1 - 2 - 3 Block Set <Z18>

Lot of 3 - Uncoated 1 - 2 - 3 Block Set <Z18>

  • Spring, Texas, United States
  • Nov 2nd
Tin Coated 1 - 2 - 3 Block Set &lt;Z17&gt;

Tin Coated 1 - 2 - 3 Block Set <Z17>

  • Spring, Texas, United States
  • Nov 2nd
PARALELL BARS FOR MACHINE SHOP SET UP

PARALELL BARS FOR MACHINE SHOP SET UP

  • Palmdale, California, United States
  • Nov 3rd
THREADWELL TANGI - MATIC RADIUS &amp; ANGLE GRINDING WHEEL DRESSER 5431 MACHINE SHOP

THREADWELL TANGI - MATIC RADIUS & ANGLE GRINDING WHEEL DRESSER 5431 MACHINE SHOP

  • Xenia, Ohio, United States
  • Nov 11th
LUCAS 72&#034; SQUARE ROTARY TABLE

LUCAS 72" SQUARE ROTARY TABLE

  • Bellefonte, Pennsylvania, United States
  • Nov 12th
Troyke 15&#034; horizontal rotary table machining, adapater workholder

Troyke 15" horizontal rotary table machining, adapater workholder

  • Houston, Texas, United States
  • Nov 12th
KITAGAWA ACTUATOR ASSEMBLY W/ 26-3/8&#034; L 2-3/4&#034; DIA DRAWBAR CNC LATHE

KITAGAWA ACTUATOR ASSEMBLY W/ 26-3/8" L 2-3/4" DIA DRAWBAR CNC LATHE

  • Oxnard, California, United States
  • Nov 21st
Acme Serrated Master Key 2.4375&#034; x .500&#034; x 1.530&#034; 2-7/16&#034; x 1/2&#034; WORK-HOLDING

Acme Serrated Master Key 2.4375" x .500" x 1.530" 2-7/16" x 1/2" WORK-HOLDING

  • Jeddo, Michigan, United States
  • Nov 21st
Murrelektronik Sensor Cables - Lot of 11 7000-88261-2200060 NEDW

Murrelektronik Sensor Cables - Lot of 11 7000-88261-2200060 NEDW

  • Kitchener, Ontario, Canada
  • Nov 22nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies