+ Post new Ad
Hardinge DV59 metal lathe, NO turret or collet closer, will part out, US $1500 – Picture 0
Hardinge DV59 metal lathe, NO turret or collet closer, will part out, US $1500 – Picture 0

Hardinge Dv59 Metal Lathe, No Turret Or Collet Closer, Will Part Out

US $1500

  • Oxford, Pennsylvania, United States
  • Jun 10th
Open on mobile:
QR code
Here is a Hardinge DV59 lathe. This is listed in another listing complete.  For purposes of this listing, the turret tailstock and the collet closer and serrated ring are not included.  It has been tested as working through the speed ranges. Above 2000 rpm there is a bearing noise. I don't know where it is coming from. The headstock does remain cool after 1/2 hour of running so it is likely somewhere in the variable speed assembly, but I can't be sure. It is wired 220 volts three phase. Here is your opportunity to convert your 440 volt machine to a 220 volt machine. It has the taper lock spindle. Payment to be check, cash or wire transfer. Shipping to be arranged by buyer. I will load. I am about to scrap this and am only likely to keep this ad up for a very short time.  I will probably take a few more parts off and then scrap it.  I will consider best offers only if you pick it up in person within one week. I am not going to wait around for a common carrier all day  for this price.  **************************************************************** STANDARD EBAY POLICY All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions, email me direct at warren9@zoominternet.net or call 610-932-4019. I collect PA sales tax for local pickups.

Directions

Similar products from Tools for Lathe Machines

Old ~South Bend Machinist Tool Machine Lathe ART PRINT AD~ ORIGINAL ANTIQUE 1931

Old ~South Bend Machinist Tool Machine Lathe ART PRINT AD~ ORIGINAL ANTIQUE 1931

  • Indiana Home Of "The INDY 500", United States
  • Jun 10th
Lathe Spindle Chuck Jacobs 58B 1-1/2x8 tpi Atlas Craftsman South Bend

Lathe Spindle Chuck Jacobs 58B 1-1/2x8 tpi Atlas Craftsman South Bend

  • Hopkinton, Massachusetts, United States
  • Jun 10th
Shopsmith Mark5 Bandsaw w/Fence, date 11-11-93, Nice!

Shopsmith Mark5 Bandsaw w/Fence, date 11-11-93, Nice!

  • Newmanstown, Pennsylvania, United States
  • Jun 10th
Shopsmith Mark5, 510 Main Table, very nice!

Shopsmith Mark5, 510 Main Table, very nice!

  • Newmanstown, Pennsylvania, United States
  • Jun 10th
VALENITE MODCO TOOLS # ESU16451 TOOL HOLDER LATHE *NEW*

VALENITE MODCO TOOLS # ESU16451 TOOL HOLDER LATHE *NEW*

  • Canton, Michigan, United States
  • Jun 10th
MONARCH #CK 14" X 30" LATHE

MONARCH #CK 14" X 30" LATHE

  • Brook Park, Ohio, United States
  • Jun 10th
12mm CERATIZIT BORING BAR PROFILE MASTER PM12-1.5D R

12mm CERATIZIT BORING BAR PROFILE MASTER PM12-1.5D R

  • Gabrovo, Gabrovo, Bulgaria
  • Jun 10th
9" SOUTH BEND LATHE 6 POSITION PRODUCTION TURRET WITH NEW CHUCKS

9" SOUTH BEND LATHE 6 POSITION PRODUCTION TURRET WITH NEW CHUCKS

  • Seekonk, Massachusetts, United States
  • Jun 10th
H J MARCEAU ADJUSTABLE LATHE TOOL HOLDER

H J MARCEAU ADJUSTABLE LATHE TOOL HOLDER

  • Baldwinville, Massachusetts, United States
  • Jun 10th
SOUTH BEND 9 +10k LATHE CROSS FEED SCREW WITH LARGE DiAL UPGRADE .NICE!

SOUTH BEND 9 +10k LATHE CROSS FEED SCREW WITH LARGE DiAL UPGRADE .NICE!

  • Melbourne, Florida, United States
  • Jun 10th
12mm CERATIZIT COOLANT BORING BAR PROFILE MASTER PM12-2.25D R

12mm CERATIZIT COOLANT BORING BAR PROFILE MASTER PM12-2.25D R

  • Gabrovo, Gabrovo, Bulgaria
  • Jun 10th
SOUTH BEND 9 +10k COMPOUND SCREW WITH LARGE DiAL UPGRADE .NICE!

SOUTH BEND 9 +10k COMPOUND SCREW WITH LARGE DiAL UPGRADE .NICE!

  • Melbourne, Florida, United States
  • Jun 10th
Schaublin 102 lathe, Radius ball turning attachment, Habegger, Mikron,

Schaublin 102 lathe, Radius ball turning attachment, Habegger, Mikron,

  • Woodbury, Connecticut, United States
  • Jun 10th
Craftsman 109 BROKEN rear guard and threading chart 3255

Craftsman 109 BROKEN rear guard and threading chart 3255

  • Williamston, Michigan, United States
  • Jun 10th
4 WAY TOOL POST OFF SOUTH BEND 9" LATHE

4 WAY TOOL POST OFF SOUTH BEND 9" LATHE

  • Baldwinville, Massachusetts, United States
  • Jun 10th
10mm CERATIZIT BORING BAR PROFILE MASTER PM10-1.5D R

10mm CERATIZIT BORING BAR PROFILE MASTER PM10-1.5D R

  • Gabrovo, Gabrovo, Bulgaria
  • Jun 10th
Craftsman 109 lathe head stock ,adj nut,bearings, oilers,lock pin & hardware

Craftsman 109 lathe head stock ,adj nut,bearings, oilers,lock pin & hardware

  • Williamston, Michigan, United States
  • Jun 10th
5" CENTER HEIGHT INDEXING Dividing HEAD TAIL STOCK Item #M3A5.2

5" CENTER HEIGHT INDEXING Dividing HEAD TAIL STOCK Item #M3A5.2

  • Perth, Ontario, Canada
  • Jun 10th
Logan Model 920 Lathe (Inv.34845)

Logan Model 920 Lathe (Inv.34845)

  • Portland, Connecticut, United States
  • Jun 10th
Craftsman 109 lathe banjo mounting plate for change gears

Craftsman 109 lathe banjo mounting plate for change gears

  • Williamston, Michigan, United States
  • Jun 10th

People who viewed this item also vieved

Brown & Sharp Cross Slide Cams/Slotting Screwmachine OOG 1/2" Lot of 16

Brown & Sharp Cross Slide Cams/Slotting Screwmachine OOG 1/2" Lot of 16

  • Johnston, Rhode Island, United States
  • Jan 30th
Lyndex 16C Collet 3/8" Hex

Lyndex 16C Collet 3/8" Hex

  • Johnson City, New York, United States
  • Jan 30th
Lyndex 16C Collet 3/4"

Lyndex 16C Collet 3/4"

  • Johnson City, New York, United States
  • Jan 30th
Hause Holomatic 2497 Drilling Head #118

Hause Holomatic 2497 Drilling Head #118

  • Roanoke, Virginia, United States
  • Jan 30th
Pack of 5 LAWSON Supertanium® - Locking Thread Insert, Stainless Steel, M5 x 0.8

Pack of 5 LAWSON Supertanium® - Locking Thread Insert, Stainless Steel, M5 x 0.8

  • Addison, Illinois, United States
  • Jan 30th
Lot 3 High Speed Steel Long Boy Drill Straight Shank 12" Right Hand

Lot 3 High Speed Steel Long Boy Drill Straight Shank 12" Right Hand

  • Bethpage, New York, United States
  • Jan 30th
Ensinger Delrin 150 Plate 24" x 24" x 1/2" Flat White Plastic Acetal Sheet

Ensinger Delrin 150 Plate 24" x 24" x 1/2" Flat White Plastic Acetal Sheet

  • Laporte, Colorado, United States
  • Jan 30th
Omega Sinker EDM Model 405D, Late 90's, 3 Axis, 220/240v

Omega Sinker EDM Model 405D, Late 90's, 3 Axis, 220/240v

  • Watertown, Connecticut, United States
  • Jan 30th
SYSTEM 3R EDM MANUAL CHUCK ADAPTER 3R-466-100

SYSTEM 3R EDM MANUAL CHUCK ADAPTER 3R-466-100

  • Wadley, Alabama, United States
  • Jan 30th
CINCINNATI MECHANICAL PRESS BRAKE 225 Ton 10' Series 9 (28614)

CINCINNATI MECHANICAL PRESS BRAKE 225 Ton 10' Series 9 (28614)

  • Cincinnati, Ohio, United States
  • Jan 30th
Vintage 12 3/4" Red Metal Shears Blue Bird USA Lot 14-37-4

Vintage 12 3/4" Red Metal Shears Blue Bird USA Lot 14-37-4

  • Bruce, South Dakota, United States
  • Jan 30th
TRW Stud Welder

TRW Stud Welder

  • Nampa, Idaho, United States
  • Jan 30th
Sunnen stones P20-J 23

Sunnen stones P20-J 23

  • Ware, Massachusetts, United States
  • Jan 30th
Sunnen stones P20-J57

Sunnen stones P20-J57

  • Ware, Massachusetts, United States
  • Jan 30th
Sunnen stones L20-A73

Sunnen stones L20-A73

  • Ware, Massachusetts, United States
  • Jan 30th
Taft Pierce Surface Grinder model #1 [69]

Taft Pierce Surface Grinder model #1 [69]

  • Racine, Wisconsin, United States
  • Jan 30th
DUMORE 10-251 1/4" DIE END GRINDER

DUMORE 10-251 1/4" DIE END GRINDER

  • Waterford, Michigan, United States
  • Jan 30th
SMALL TILTING SLIDING SINE GRINDING WHEEL DRESSER MACHINIST JIG FIXTURE

SMALL TILTING SLIDING SINE GRINDING WHEEL DRESSER MACHINIST JIG FIXTURE

  • Waterford, Michigan, United States
  • Jan 30th
UK 3 X 1/4 X 1 HSS MILLING CUTTER 30T

UK 3 X 1/4 X 1 HSS MILLING CUTTER 30T

  • Wadley, Alabama, United States
  • Jan 30th
INGERSOLL FACE MILL 6X4S08R14

INGERSOLL FACE MILL 6X4S08R14

  • Freeland, Michigan, United States
  • Jan 30th
Yuasa 6'' rotary table 550-046 horizontal or vertical fits Bridgeport Clausing

Yuasa 6'' rotary table 550-046 horizontal or vertical fits Bridgeport Clausing

  • Millstadt, Illinois, United States
  • Jan 30th
Malco TC174, ridgid 103, & blue point TC123A Tube Cutters Used

Malco TC174, ridgid 103, & blue point TC123A Tube Cutters Used

  • Durham, North Carolina, United States
  • Jan 30th
Rapid Air Feed Model J4-E (used) -Good Condition

Rapid Air Feed Model J4-E (used) -Good Condition

  • Lynnwood, Washington, United States
  • Jan 30th
Rapid Air Feed Model F4-E (used) -Good Condition

Rapid Air Feed Model F4-E (used) -Good Condition

  • Lynnwood, Washington, United States
  • Jan 30th
20" DOALL Model 2013-V Vertical Band Saw, New 1999.

20" DOALL Model 2013-V Vertical Band Saw, New 1999.

  • Dayton, Ohio, United States
  • Jan 30th
DAKE MODEL #COBRA 350AX SAW (TOLEDO, OH)

DAKE MODEL #COBRA 350AX SAW (TOLEDO, OH)

  • United States
  • Jan 30th
DAKE Super Cut 315 Cold Saw for Metal Cutting

DAKE Super Cut 315 Cold Saw for Metal Cutting

  • Watertown, Connecticut, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies