+ Post new Ad
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 0
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 1
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 2
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 3
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 4
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 5
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 0
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 1
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 2
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 3
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 4
HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED], US $260.00 – Picture 5

Hardinge Lathe Lever Collet Closer May Fit [hlv-h-dsm-hc-split Bed]

US $260.00

  • Penfield, New York, United States
  • Jan 30th
Open on mobile:
QR code
 HARDINGE LATHE LEVER COLLET CLOSER MAY FIT [HLV-H-DSM-HC-SPLIT BED]  Bearing feel good.Has some pitting in non functional area [See Photo]  Tube length 10 1/2"  as shown in photo. Internal Thread is Excellent. Buyer pays actual shipping on approx 14 lbs from Zip 14526 NY state buyers add 8% sales tax to total. We only ship to USA. Payment methods: Ask for options or paypal [personal checks held 10 business days]. INSURANCE IS REQUIRED.  Return Policy: Buyer pays all shipping costs and reasonable restocking fee unless merchandise was misrepresented.                NO RESERVE If you are not completely satisfied with any purchase from gnarly4d Please contact Me. Your complete satisfaction is my goal. Please check My Feedback.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Bearing feel good.Has some pitting in non functional area [See Photo]”

Directions

Similar products from Metalworking Collets

7/8" Hex Collet Pads Set for 1129-1102 W&S #4 Master Collet

7/8" Hex Collet Pads Set for 1129-1102 W&S #4 Master Collet

  • Chicago, Illinois, United States
  • Jan 30th
Balas 3/4" Hex Collet Pads Set for 1129-1102 W&S #4 Master Collet

Balas 3/4" Hex Collet Pads Set for 1129-1102 W&S #4 Master Collet

  • Chicago, Illinois, United States
  • Jan 30th
5C COLLET LOT , HARDINGE,RSB,GRAND, RIVETT , 10 COLLETS

5C COLLET LOT , HARDINGE,RSB,GRAND, RIVETT , 10 COLLETS

  • Berlin, Connecticut, United States
  • Jan 30th
Type PF70-5C Spin Index

Type PF70-5C Spin Index

  • Compton, California, United States
  • Jan 30th
5C Collet Extension Tube Set American Made

5C Collet Extension Tube Set American Made

  • Tilton, New Hampshire, United States
  • Jan 30th
Kennametal Face Mill Cutter M1D200E1805S075L157 and 70 Inserts

Kennametal Face Mill Cutter M1D200E1805S075L157 and 70 Inserts

  • Corydon, Indiana, United States
  • Jan 30th
ER11 5mm Spring Collet for CNC Milling Lathe Tool Workholding SUJ2 HRC 45 degC

ER11 5mm Spring Collet for CNC Milling Lathe Tool Workholding SUJ2 HRC 45 degC

  • Shenzhen, China
  • Jan 30th
MARATHON CAT# R6J30A36 3 PHASE FUSE BLOCK USED 600 VOLT GREAT PRICE!

MARATHON CAT# R6J30A36 3 PHASE FUSE BLOCK USED 600 VOLT GREAT PRICE!

  • Cincinnati, Ohio, United States
  • Jan 30th
BC1 MACHINE COLLET MODEL 24332 4461016 F2D5

BC1 MACHINE COLLET MODEL 24332 4461016 F2D5

  • Rochester, New York, United States
  • Jan 30th
MP7 MACHINE COLLET MODEL 431800168 4118Y

MP7 MACHINE COLLET MODEL 431800168 4118Y

  • Rochester, New York, United States
  • Jan 30th
NEW KENNAMETAL Erickson 3/16 Collet 100TG0188

NEW KENNAMETAL Erickson 3/16 Collet 100TG0188

  • Lincoln, Delaware, United States
  • Jan 30th
3 new 1/8 inch ER 16 collets, various manufactures

3 new 1/8 inch ER 16 collets, various manufactures

  • Kalispell, Montana, United States
  • Jan 30th
57/64" Warner & Swasey #5-1A Collet, 471-1002 Nardco

57/64" Warner & Swasey #5-1A Collet, 471-1002 Nardco

  • Hendersonville, Tennessee, United States
  • Jan 30th
Hardinge 1-1/4" ACME .515 Collet

Hardinge 1-1/4" ACME .515 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
5/8" Hex Warner & Swasey #5 Collet, 4669-1004 Nardco

5/8" Hex Warner & Swasey #5 Collet, 4669-1004 Nardco

  • Hendersonville, Tennessee, United States
  • Jan 30th
Hardinge 1-1/4" Gridley S12 Master Collet

Hardinge 1-1/4" Gridley S12 Master Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
5/8" Square Collet, Nardco 1129-1005

5/8" Square Collet, Nardco 1129-1005

  • Hendersonville, Tennessee, United States
  • Jan 30th
Hardinge 2-5/8" Cone 2.234" Serrated Collet

Hardinge 2-5/8" Cone 2.234" Serrated Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
Hardinge 1-5/8" Greenlee 57/64" Serrated Collet

Hardinge 1-5/8" Greenlee 57/64" Serrated Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
3/8" Square Collet, Nardco 471-1003

3/8" Square Collet, Nardco 471-1003

  • Hendersonville, Tennessee, United States
  • Jan 30th

People who viewed this item also vieved

5 Inch Drive Plate D13 Mount

5 Inch Drive Plate D13 Mount

  • Sonora, California, United States
  • Feb 23rd
10 inch Shop Built Sine Plate

10 inch Shop Built Sine Plate

  • Santa Fe Springs, California, United States
  • Feb 23rd
Machinist sine bar

Machinist sine bar

  • Aurora, Ohio, United States
  • Feb 23rd
VLIER / NEWTON HYDRAULIC CLAMPS

VLIER / NEWTON HYDRAULIC CLAMPS

  • Hillsborough, New Jersey, United States
  • Feb 28th
CINCINNATI TOOL CO. HARGRAVE Large 10 Inched C Clamp Antique Vintage

CINCINNATI TOOL CO. HARGRAVE Large 10 Inched C Clamp Antique Vintage

  • Duluth, Minnesota, United States
  • Feb 28th
2pcs 201A Quick Holding U Shaped Bar Red Grip Horizontal Toggle Clamp 27Kg 60Lbs

2pcs 201A Quick Holding U Shaped Bar Red Grip Horizontal Toggle Clamp 27Kg 60Lbs

  • Hong Kong, Hong Kong
  • Feb 28th
Bench Vise 4" Swivel Pipe Holder Anvil Japan BF No. 5177, 16 Lbs Opens 4"

Bench Vise 4" Swivel Pipe Holder Anvil Japan BF No. 5177, 16 Lbs Opens 4"

  • San Diego, California, United States
  • Feb 28th
kurt vise handles

kurt vise handles

  • Alexandria, Minnesota, United States
  • Feb 28th
6" WILTON Model C-3 Combination Bench & Pipe Vise

6" WILTON Model C-3 Combination Bench & Pipe Vise

  • Pomona, California, United States
  • Feb 28th
Standard Tool No. 535 Size 2 60 Degree Dead Center 7443-120

Standard Tool No. 535 Size 2 60 Degree Dead Center 7443-120

  • Hillsdale, New Jersey, United States
  • Mar 2nd
Bruckner Precision Live Center Type R MT3 Made in Germany

Bruckner Precision Live Center Type R MT3 Made in Germany

  • Chillicothe, Ohio, United States
  • Mar 2nd
EXCELLENT MAZAK MT4 dead center morse taper no 4 lathe #4

EXCELLENT MAZAK MT4 dead center morse taper no 4 lathe #4

  • San Marcos, California, United States
  • Mar 2nd
6.00 inches Lathe chuck. Back plate is 2.25x 8 tpi

6.00 inches Lathe chuck. Back plate is 2.25x 8 tpi

  • Bloomington, California, United States
  • Mar 2nd
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck

Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck

  • Houston, Texas, United States
  • Mar 2nd
CUSHMAN 3 JAW CHUCK WITH KEY 7 1/2" INCH ATLAS SOUTH BEND CLAUSING LATHE TOOL

CUSHMAN 3 JAW CHUCK WITH KEY 7 1/2" INCH ATLAS SOUTH BEND CLAUSING LATHE TOOL

  • Toms River, New Jersey, United States
  • Mar 2nd
MACHINIST LATHE MILL Setup / Holding Blocks Parallels Lot Nice Condition

MACHINIST LATHE MILL Setup / Holding Blocks Parallels Lot Nice Condition

  • San Pedro, California, United States
  • May 15th
C Clamp J. H. WILLIAMS Co. AGRIPPA 8" No 108 Heavy Duty Drop Forged C Clamp, USA

C Clamp J. H. WILLIAMS Co. AGRIPPA 8" No 108 Heavy Duty Drop Forged C Clamp, USA

  • Saunderstown, Rhode Island, United States
  • May 16th
240G Proto Tools Professional Long Reach Pliers, USA

240G Proto Tools Professional Long Reach Pliers, USA

  • Petersburg, Virginia, United States
  • May 16th
Custom Workholding Fixtures for Dial Indicators Precision Measurement

Custom Workholding Fixtures for Dial Indicators Precision Measurement

  • Story City, Iowa, United States
  • May 26th
Precision V Block 6"x6"x4" 90 Degree Angle Heavy Duty

Precision V Block 6"x6"x4" 90 Degree Angle Heavy Duty

  • Story City, Iowa, United States
  • May 26th
LUFKIN NO. 905 V-BLOCK

LUFKIN NO. 905 V-BLOCK

  • Riverside, California, United States
  • May 26th
NEW Sherline 8700 Rotary Table CNC Stepper Motor Controller Indexer

NEW Sherline 8700 Rotary Table CNC Stepper Motor Controller Indexer

  • Edmonds, Washington, United States
  • May 27th
2 INDEXER 5C COLLET CLOSER HANDLES

2 INDEXER 5C COLLET CLOSER HANDLES

  • Chino, California, United States
  • May 27th
Haas 5c indexer

Haas 5c indexer

  • West Hartford, Connecticut, United States
  • May 27th
KENNAMETAL SINGLE ANGLE COLLET CHUCK SS175TG100819 TG100 COLLET SERIES 1.75SHANK

KENNAMETAL SINGLE ANGLE COLLET CHUCK SS175TG100819 TG100 COLLET SERIES 1.75SHANK

  • Spencer, Indiana, United States
  • May 30th
ITW FLANGE BODY FOR TORK LOK COLLET CHUCK ARBOR AC-2910 NEW

ITW FLANGE BODY FOR TORK LOK COLLET CHUCK ARBOR AC-2910 NEW

  • Spencer, Indiana, United States
  • May 30th
Collis Quick-Change Tension & Compression Holder

Collis Quick-Change Tension & Compression Holder

  • Duncan, South Carolina, United States
  • May 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies