+ Post new Ad
Harig Tru- Dex Wheel Dresser Center Height 3.000", US $16000 – Picture 0
Harig Tru- Dex Wheel Dresser Center Height 3.000", US $16000 – Picture 0

Harig Tru- Dex Wheel Dresser Center Height 3.000"

US $16000

  • Willoughby, Ohio, United States
  • Nov 18th
Open on mobile:
QR code
Great used condition. Comes with everything shown in pictures. Harig's tangent-radius dresser is the most accurate, easiest to use, and safest wheel dresser available. Dresses wheels up to 12" in diameter with up to 2 1/4" convex and 5" concave radii. Unique 24 division indexing every 15 degrees makes grinding angles on the Tru-Dex easy, while tangent "throw" of 1 7/16" to either side of center facilitates tangent-radius dressing. Dressing done at bottom of the wheel for highest accuracy. Handwheel in back of unit rotates and swings dresser arm keeping hands safely away from grinding wheel. When accurate wheel dressing is necessary, the Tru-Dex will do the job quickly and efficiently. Reliability backed by Harig's trademark service. Features Sturdy and dimensionally stable cast iron housing Hardened and ground base plate for minimum wear Vernier graduated to 5 minutes for quick setting of any angle with locking screw Index plate with precision index pin locks in every 15 degrees to +/- 10 seconds 2 adjustable stops work with stop pin to set accurate angles between index locations Handwheel in back of unit controls both rotation and offset movements and keeps hands away from grinding wheel Tangent "throw" 1 7/16" to either side of center Slide is under spring load to automatically drop into center Ground "v" in dresser arm keeps diamond centered

Directions

Similar products from Toold for Grinding Machines

Ready Tool Company 111 Brass Grinder Dog

Ready Tool Company 111 Brass Grinder Dog

  • Amery, Wisconsin, United States
  • Nov 20th
WELDON END MILL SHARPENING/GRINDING FIXTURE

WELDON END MILL SHARPENING/GRINDING FIXTURE

  • Pomona, California, United States
  • Nov 20th
PRECISION DIAMOND GANG ARBOR ASSEMBLY

PRECISION DIAMOND GANG ARBOR ASSEMBLY

  • Carpinteria, California, United States
  • Nov 19th
ITI 169C08978 CAL MICRO DA 10449-2

ITI 169C08978 CAL MICRO DA 10449-2

  • Carpinteria, California, United States
  • Nov 19th
DoAll 120V Powered Spin-Indexer Sine Grinding Fixture 3C Collets Tail Stock CNC

DoAll 120V Powered Spin-Indexer Sine Grinding Fixture 3C Collets Tail Stock CNC

  • Hopkins, Minnesota, United States
  • Nov 19th
CLEAN PBA5 5,000 lbs Anderson Pillow Block Static Balancing Way Wheel Balancer

CLEAN PBA5 5,000 lbs Anderson Pillow Block Static Balancing Way Wheel Balancer

  • Hopkins, Minnesota, United States
  • Nov 19th
MTI DGA2417-R DIFINE PART OFFPRECISION DIAMOND GANG ARBOR ASSEMBLY

MTI DGA2417-R DIFINE PART OFFPRECISION DIAMOND GANG ARBOR ASSEMBLY

  • Carpinteria, California, United States
  • Nov 19th
deckel so cutter grinder deckel so index head deckel cutter grinder engraver

deckel so cutter grinder deckel so index head deckel cutter grinder engraver

  • Etobicoke, Ontario, Canada
  • Nov 19th
Pneumatic Grinding Machine Grinding Grinding Machine Polishing Machine

Pneumatic Grinding Machine Grinding Grinding Machine Polishing Machine

  • CN, China
  • Nov 18th
Cylindrical Grinder

Cylindrical Grinder

  • Charlotte, North Carolina, United States
  • Nov 18th
THOMPSON 12 X 24 SURFACE GRINDER

THOMPSON 12 X 24 SURFACE GRINDER

  • Caseyville, Illinois, United States
  • Nov 18th
Baldor grinder

Baldor grinder

  • Mesa, Arizona, United States
  • Nov 18th
Okamoto IGM-1E Hydraulic Internal ID Grinder W/ Full Automatic Grinding Cycle

Okamoto IGM-1E Hydraulic Internal ID Grinder W/ Full Automatic Grinding Cycle

  • Lake Saint Louis, Missouri, United States
  • Nov 18th
Harig GRIND-ALL NO. 2 4 " punch grinder

Harig GRIND-ALL NO. 2 4 " punch grinder

  • Newbury, Ohio, United States
  • Nov 18th
Dumore Model 8066 Hand - Grinder - Utility- Grinder Great Condition

Dumore Model 8066 Hand - Grinder - Utility- Grinder Great Condition

  • Pittsburgh, Pennsylvania, United States
  • Nov 17th
BELT SANDER DIY DRUM 7INCH

BELT SANDER DIY DRUM 7INCH

  • Gatineau, Quebec, Canada
  • Nov 17th
J & S Tool Fluidmotion Radii and Angle Dresser

J & S Tool Fluidmotion Radii and Angle Dresser

  • Rochester, New York, United States
  • Nov 17th
9 pc. SPECIAL 60 grit 2 x 28" sanding/grinding belts to fit Eastwood sander

9 pc. SPECIAL 60 grit 2 x 28" sanding/grinding belts to fit Eastwood sander

  • Belmont, Michigan, United States
  • Nov 17th
CHEVALIER FSG-618 GRINDER

CHEVALIER FSG-618 GRINDER

  • Kalida, Ohio, United States
  • Nov 17th
Delta Rockwell 1x42 Sander Grinder Belt Sander 1 X 42 Knife Making Fabrication

Delta Rockwell 1x42 Sander Grinder Belt Sander 1 X 42 Knife Making Fabrication

  • Raleigh, North Carolina, United States
  • Nov 17th

People who viewed this item also vieved

H&G STYLE SAMA 1/2" CAPACITY DIE HEAD W/ 3/4" SHANK

H&G STYLE SAMA 1/2" CAPACITY DIE HEAD W/ 3/4" SHANK

  • Ellington, New York, United States
  • Jan 30th
SWISS SPEGO TURNAMIC BAR FEEDER

SWISS SPEGO TURNAMIC BAR FEEDER

  • Baldwin Park, California, United States
  • Jan 30th
LOCLINE Nozzles 1/4" 1 Lot Mostly new Pieces

LOCLINE Nozzles 1/4" 1 Lot Mostly new Pieces

  • Bridgeport, Connecticut, United States
  • Jan 30th
thread saver heliciol metric thread saver/repair four sets new!!

thread saver heliciol metric thread saver/repair four sets new!!

  • Pittsburgh, Pennsylvania, United States
  • Jan 30th
TAP WRENCH T HANDLE 3 PIECE SET

TAP WRENCH T HANDLE 3 PIECE SET

  • Houston, Texas, United States
  • Jan 30th
LOT OF 5 HSS HAND TAPS 1-1/8"-24 TO 1-1/2"-11-1/4 BATH SWANSON

LOT OF 5 HSS HAND TAPS 1-1/8"-24 TO 1-1/2"-11-1/4 BATH SWANSON

  • Ellington, New York, United States
  • Jan 30th
Intech EDM Tungsten Wire Spool 0.030M W21030 Machinist Toolmaker 5,000

Intech EDM Tungsten Wire Spool 0.030M W21030 Machinist Toolmaker 5,000

  • Lenexa, Kansas, United States
  • Jan 30th
NEC PC-9801UV11 PC9801UV11 for CNC Sodick wire EDM Japanese Engineer Refurbished

NEC PC-9801UV11 PC9801UV11 for CNC Sodick wire EDM Japanese Engineer Refurbished

  • Tokyo, Japan
  • Jan 30th
NEC PC-9801US PC9801US for CNC Sodick wire EDM Japanese Engineer Refurbished

NEC PC-9801US PC9801US for CNC Sodick wire EDM Japanese Engineer Refurbished

  • Tokyo, Japan
  • Jan 30th
40" x 16 Gauge Manual Guillotine Shear Cutting Cutter w/ Stand

40" x 16 Gauge Manual Guillotine Shear Cutting Cutter w/ Stand

  • Temperance, Michigan, United States
  • Jan 30th
PEXTO 37" 16 GA HYDRUALIC SHEAR FOOT ACUATED RETROFITTED ACCUSHEAR

PEXTO 37" 16 GA HYDRUALIC SHEAR FOOT ACUATED RETROFITTED ACCUSHEAR

  • Hopkins, Minnesota, United States
  • Jan 30th
National Heavy Duty box & pan Brake 6' x 12Ga U6-7212 NEW (28387)

National Heavy Duty box & pan Brake 6' x 12Ga U6-7212 NEW (28387)

  • Cincinnati, Ohio, United States
  • Jan 30th
sunnen hone stone y16 j83 xb05

sunnen hone stone y16 j83 xb05

  • Somonauk, Illinois, United States
  • Jan 30th
LOT OF 3 NOBUR TOOL BURR REMOVAL TOOLS 13/64" TO 5/8"

LOT OF 3 NOBUR TOOL BURR REMOVAL TOOLS 13/64" TO 5/8"

  • Ellington, New York, United States
  • Jan 30th
LOT OF 7 ASSORTED FLEX-O-LAP & ACROLAP LAPPING TOOLS 1/4" TO 1"

LOT OF 7 ASSORTED FLEX-O-LAP & ACROLAP LAPPING TOOLS 1/4" TO 1"

  • Ellington, New York, United States
  • Jan 30th
ISCAR 1" HELIFACE INTEGRAL TOOL HOLDER & 1 CARBIDE INSERT ** NEW **

ISCAR 1" HELIFACE INTEGRAL TOOL HOLDER & 1 CARBIDE INSERT ** NEW **

  • Upland, California, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Small Machinist Gear s for Lathe Machine

MACHINIST LATHE MILL Lot of Small Machinist Gear s for Lathe Machine

  • Morris Plains, New Jersey, United States
  • Jan 30th
Logan lathe 10" counter shaft support leg

Logan lathe 10" counter shaft support leg

  • Wappingers Falls, New York, United States
  • Jan 30th
7 HSS STRAIGHT & STAGGERED TOOTH MILLING CUTTERS 2-3/8" TO 4" W/ 1" BORE

7 HSS STRAIGHT & STAGGERED TOOTH MILLING CUTTERS 2-3/8" TO 4" W/ 1" BORE

  • Ellington, New York, United States
  • Jan 30th
3 BIG HSS STRAIGHT TOOTH MILLING CUTTERS 6-1/2" TO 7" W/ 1-1/4" BORE MORSE F&D

3 BIG HSS STRAIGHT TOOTH MILLING CUTTERS 6-1/2" TO 7" W/ 1-1/4" BORE MORSE F&D

  • Ellington, New York, United States
  • Jan 30th
PAIR OF HSS HOBBING MILL CUTTERS 3-1/2" & 3-3/4" W/ 1-1/4" BORES DAVID BROWN

PAIR OF HSS HOBBING MILL CUTTERS 3-1/2" & 3-3/4" W/ 1-1/4" BORES DAVID BROWN

  • Ellington, New York, United States
  • Jan 30th
Mint Chaun Brand MG OUTSIDE MICROMETER 9-10" .0001" Paperwork Certified Accurate

Mint Chaun Brand MG OUTSIDE MICROMETER 9-10" .0001" Paperwork Certified Accurate

  • Twin Lakes, Wisconsin, United States
  • Jan 30th
Reliant Floor Model Heavy Duty Wood Shaper,FOR THE CRAFTSMAN

Reliant Floor Model Heavy Duty Wood Shaper,FOR THE CRAFTSMAN

  • Temple, Pennsylvania, United States
  • Jan 30th
1000 lb. Hand Crank Straddle Lift Dutlon-Lainson Company

1000 lb. Hand Crank Straddle Lift Dutlon-Lainson Company

  • Pilot Rock, Oregon, United States
  • Jan 30th
LOT OF 15 HSS SLITTING & SLOTTING SAWS 3" X .028 TO .125 CUT W/ 1" BORES MALCO

LOT OF 15 HSS SLITTING & SLOTTING SAWS 3" X .028 TO .125 CUT W/ 1" BORES MALCO

  • Ellington, New York, United States
  • Jan 30th
W.F. WELLS and SONS, inc. BAND SAW , 1 HP MOTOR 64-1/2 inches long 4 SPEEDS

W.F. WELLS and SONS, inc. BAND SAW , 1 HP MOTOR 64-1/2 inches long 4 SPEEDS

  • North Tonawanda, New York, United States
  • Jan 30th
Knuth Band Saw

Knuth Band Saw

  • Oxnard, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies