Hart Scientific / FLUKE Scientific Dry Well Calibrator 9009 L@@K~, US $3,895.00 – Picture 0

Hart Scientific / FLUKE Scientific Dry Well Calibrator 9009 L@@K~, US $3,895.00 – Picture 1

Hart Scientific / Fluke Scientific Dry Well Calibrator 9009 L@@k~

US $3,895.00

Madison, Connecticut, United States
Mar 5th

Open on mobile:
QR code

You are looking at a Hart Scientific 9009 dry well calibrator. The unit was just removed from service always taken care of. Comes with 7 vessels and removal clip and power cord. The specifications are listed below. We will ship this unit anywhere in the lower 48 states for 40.00 S/H we will offer a 14 day return minus S/H. Thank you for looking and good luck. The Fluke Calibration Model 9009 industrial dual-block calibrator lets you calibrate at hot and cold temperatures at the same time. Double your productivity or cut your calibration time in half with the 9009. The 9009 includes two independently controlled temperature blocks. The hot block provides temperatures from 50°C to 350°C, while the cold block covers the range –15°C to 110°C. Each block is controlled by a precision temperature controller. Each temperature block in the 9009 includes two wells with removable inserts. You can calibrate four probes at once, or you can calibrate two probes at the same time with an external reference. With the 9009, you can use the two temperature wells to get quick "zero" and "span" references for transmitter calibrations. The 9009 industrial dual-block calibrator is housed in a tough Pelican™ case that is both airtight and watertight. Although this small package weighs only 10 pounds, the 9009 calibrator fits everything you need including a power cord and four extra inserts. Inserts are available to accommodate sensors of any size from 1/16" (1.6 mm) to 7/16" (11.1 mm). The cold block is calibrated to within ±0.2°C with stability of ±0.05°C. The hot block's display is accurate to ±0.6°C with stability of ±0.05°C. A NIST-traceable calibration is included for each of the two test blocks. For use with automated systems, the 9009 comes with an RS-232 connection and Model 9930 Interface-it software, which allows you to control and monitor temperatures from your PC. The 9009 includes two 1/4" (6.4mm) and two 3/16" (4.8mm) inserts. Additional inserts can be purchased as accessories. Range 50°C to 350°C (122°F to 662°F) –15°C to 110°C (5°F to 230°F) (–8°C [18°F] with hot block at 350°C [662°F]) Accuracy ±0.6°C ±0.2°C Stability ±0.05°C Well-to-Well Uniformity ±0.1°C Display Resolution 0.1° Heating Times 10 minutes from 25°C to 350°C 15 minutes from 25°C to 110°C Cooling Times 30 minutes from 350°C to 100°C 16 minutes from 25°C to –15°C Stabilization Times 8 minutes Well Depth 4" (102 mm) Removable Inserts Two 1/4” (6.4 mm) and 3/16” (4.8 mm) inserts included; see Ordering Information for other available inserts Computer Interface RS-232 included with free Interface-it software Power 115 VAC (±10%), 3 A, or 230 VAC (±10%), 2 A, specify, 50/60 Hz, 250 W Size 7" H x 10.5" W x 9.75" D (178 x 267 x 248 mm) Weight 10 lb. (4.5 kg) NIST-Traceable Calibration Data at 50°C, 100°C, 150°C, 200°C, 250°C, 300°C, and 350°C Data at –8°C, 0°C, 25°C, 50°C, 75°C, 100°C, and 110°C

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Just removed from service at a metrology lab always maintained and calibrated.”