+ Post new Ad
HENROB PPC-05 SELF PIERCING RIVETER AUTO FEED, US $11172 – Picture 0
HENROB PPC-05 SELF PIERCING RIVETER AUTO FEED, US $11172 – Picture 0

Henrob Ppc-05 Self Piercing Riveter Auto Feed

US $11172

  • Elm Grove, Wisconsin, United States
  • May 29th
Open on mobile:
QR code
 Great looking machine. I think its had little use. The paint isn't even worn off on the foot controls. I have run the machine but haven't tried to rivet anything yet, I have to find out what thickness its set up for. The rivets in it are .210 diameter. Features mechanical tape feed. Motor is 10 HP 208-230 / 460 Volt three phase. Max hydraulic pressure is 3625 psi or 14.5 Bar. Pressure at the head is 6 tons. Henrobs web sight has a video of how it works. http://www.henrob.com/US/what-is-hspr.php Will ship I'm 10 miles west of Milwaukee if you would like to inspect or pickup. No warranty but guaranteed not DOA. Jeff 262 227 7774

Directions

Similar products from Tools for Other Machines

15HP Cumberland 3KN-384 PLASTIC GRANULATOR, 9" x 14"

15HP Cumberland 3KN-384 PLASTIC GRANULATOR, 9" x 14"

  • Harrison, New Jersey, United States
  • May 29th
Grieve AA650 OVEN, 650 degrees

Grieve AA650 OVEN, 650 degrees

  • Harrison, New Jersey, United States
  • May 29th
Spego TURNAMIC 123-8 BAR FEED, With Z-Sorb

Spego TURNAMIC 123-8 BAR FEED, With Z-Sorb

  • Harrison, New Jersey, United States
  • May 29th
18" L 72" W EMI ROR-18-2 CONVEYOR

18" L 72" W EMI ROR-18-2 CONVEYOR

  • Harrison, New Jersey, United States
  • May 29th
90 Ton Cap. RANSOME Model CPRS/CIRS Steel Tank Turning Roll w/ Idlers

90 Ton Cap. RANSOME Model CPRS/CIRS Steel Tank Turning Roll w/ Idlers

  • Harrison, New Jersey, United States
  • May 29th
NICE MARK FIVE 10,000 LB. WELDING POSITIONER w/POWER TILT AND ROTATION

NICE MARK FIVE 10,000 LB. WELDING POSITIONER w/POWER TILT AND ROTATION

  • Harrison, New Jersey, United States
  • May 29th
2,500 Lb.. RANSOME MODEL 25P WELDING POSITIONER w/ POWER TILT & ROTATION, ETC.

2,500 Lb.. RANSOME MODEL 25P WELDING POSITIONER w/ POWER TILT & ROTATION, ETC.

  • Harrison, New Jersey, United States
  • May 29th
30" OGP OQ-30S COMPARATOR w/ LENSE TURRET, JOY STICK CONTROL, SURF ILLUM, ETC.

30" OGP OQ-30S COMPARATOR w/ LENSE TURRET, JOY STICK CONTROL, SURF ILLUM, ETC.

  • Harrison, New Jersey, United States
  • May 29th
SIP JIG BORER GUIDING ARM FROM MP4

SIP JIG BORER GUIDING ARM FROM MP4

  • Santa Cruz, California, United States
  • May 29th
3M 00051144807642 PG Flap Wheel-Diam:2-1/2" Width:1" Grit:60 (Pack of 2)

3M 00051144807642 PG Flap Wheel-Diam:2-1/2" Width:1" Grit:60 (Pack of 2)

  • Duncan, South Carolina, United States
  • May 29th
Tapco Cutter 10379 Pro-Cutoff Brake

Tapco Cutter 10379 Pro-Cutoff Brake

  • Naples, Florida, United States
  • May 28th
SIP Societe Genevoise Jig Borer Guiding Arm in box Very Nice

SIP Societe Genevoise Jig Borer Guiding Arm in box Very Nice

  • Walland, Tennessee, United States
  • May 28th
2x 1mm Pitch Positive & Negative Knurling Tool Diagonal Knurl Wheel Metalworking

2x 1mm Pitch Positive & Negative Knurling Tool Diagonal Knurl Wheel Metalworking

  • HK, Hong Kong
  • May 28th
Crimper / Seamer / Used

Crimper / Seamer / Used

  • Nashville, Tennessee, United States
  • May 28th
Aloris Quick Change Threading Tool Post Holder Model CA-8 With P-6 Blade

Aloris Quick Change Threading Tool Post Holder Model CA-8 With P-6 Blade

  • Weaverville, North Carolina, United States
  • May 28th
Tekcast Metal Casting Machine

Tekcast Metal Casting Machine

  • Montreal-Nord, Quebec, Canada
  • May 28th
Cincinnati Main Spindle Clutch

Cincinnati Main Spindle Clutch

  • Berlin, Connecticut, United States
  • May 28th
15 Ton Whitney Model 615 Fabricator Punch - 36" Throat Great Machine!

15 Ton Whitney Model 615 Fabricator Punch - 36" Throat Great Machine!

  • Lynnwood, Washington, United States
  • May 28th
TAPCO Port-O-Brake - Model W-14

TAPCO Port-O-Brake - Model W-14

  • Spring Hill, Florida, United States
  • May 28th
Suburban Tool - MG5CVS1 - Cylindrical Grinder

Suburban Tool - MG5CVS1 - Cylindrical Grinder

  • Glasgow, Kentucky, United States
  • May 28th

People who viewed this item also vieved

Lot Of 100, Sealcon Locking Nut, PG 21, PG21, NP-21-GY, NP21GY, #130B7

Lot Of 100, Sealcon Locking Nut, PG 21, PG21, NP-21-GY, NP21GY, #130B7

  • Los Gatos, California, United States
  • Jan 30th
100 Per Bag Panduit Black Tie Mounts TM3S8C100, TM3S8-C100, #8 (m4) Screw #130B6

100 Per Bag Panduit Black Tie Mounts TM3S8C100, TM3S8-C100, #8 (m4) Screw #130B6

  • Los Gatos, California, United States
  • Jan 30th
Lot Of 55, PMA Clips FH230, FH-23-0, Shipsameday #130B5

Lot Of 55, PMA Clips FH230, FH-23-0, Shipsameday #130B5

  • Los Gatos, California, United States
  • Jan 30th
5/16-18 X 1D (.312") Phosphorous Bronze Free Running Inserts, 1185-5BN-0312

5/16-18 X 1D (.312") Phosphorous Bronze Free Running Inserts, 1185-5BN-0312

  • Abingdon, Maryland, United States
  • Jan 30th
2-56 X 1 1/2D (.129") Phosphorous Bronze Screw Lock Inserts, 3585-02BN0129

2-56 X 1 1/2D (.129") Phosphorous Bronze Screw Lock Inserts, 3585-02BN0129

  • Abingdon, Maryland, United States
  • Jan 30th
4-40 X 1D (.112") Phosphorous Bronze Screw Lock Inserts, 3585-04BN0112

4-40 X 1D (.112") Phosphorous Bronze Screw Lock Inserts, 3585-04BN0112

  • Abingdon, Maryland, United States
  • Jan 30th
Stanley UNISHEAR # 212 12 GAUGE CUTTING CAPACITY

Stanley UNISHEAR # 212 12 GAUGE CUTTING CAPACITY

  • Queen Creek, Arizona, United States
  • Jan 30th
Diacro Bender No. 2 With Stand DI-Acro

Diacro Bender No. 2 With Stand DI-Acro

  • Queen Creek, Arizona, United States
  • Jan 30th
Accurshear Front Stop NEW!

Accurshear Front Stop NEW!

  • Queen Creek, Arizona, United States
  • Jan 30th
Sunnen MBB-1290D with tooling-mandrels, stones, trueing sleeves can ship freight

Sunnen MBB-1290D with tooling-mandrels, stones, trueing sleeves can ship freight

  • Tremont, Illinois, United States
  • Jan 30th
SUNNEN HONE Y32-A63 2 STONES STK 1520

SUNNEN HONE Y32-A63 2 STONES STK 1520

  • Wadley, Alabama, United States
  • Jan 30th
SUNNEN HONE K12-A413 12 PK STONES STK 1519

SUNNEN HONE K12-A413 12 PK STONES STK 1519

  • Wadley, Alabama, United States
  • Jan 30th
Rectangular Head 12 x 13 x 6mm Grinding Wheel Diamond Dresser Tool

Rectangular Head 12 x 13 x 6mm Grinding Wheel Diamond Dresser Tool

  • Hong Kong, Hong Kong
  • Jan 30th
Scripta Grinder

Scripta Grinder

  • Glastonbury, Connecticut, United States
  • Jan 30th
Baldor Bench Grinder / Tool Sharpener, Cat# 8123WD, 3/4 HP, 3 Ph 230/460V Used

Baldor Bench Grinder / Tool Sharpener, Cat# 8123WD, 3/4 HP, 3 Ph 230/460V Used

  • Grand Rapids, Michigan, United States
  • Jan 30th
Craftsman Lathe 109 Tailstock Complete original # B 3605 tail stock

Craftsman Lathe 109 Tailstock Complete original # B 3605 tail stock

  • Grants Pass, Oregon, United States
  • Jan 30th
Bolton Steady Rest for B290V 11" x 28" High Precision Variable Speed Metal Lathe

Bolton Steady Rest for B290V 11" x 28" High Precision Variable Speed Metal Lathe

  • Pomona, California, United States
  • Jan 30th
HARDINGE SUPER SLANT SB-2H TURRET TOOL BLOCK W/ 3/4" BUSHING

HARDINGE SUPER SLANT SB-2H TURRET TOOL BLOCK W/ 3/4" BUSHING

  • Cleveland, Ohio, United States
  • Jan 30th
* LYNDEX ENDMILL HOLDER - 1 1/4" DIAMETER - NEW CONDITION - NMTB 40 - 40 TAPER *

* LYNDEX ENDMILL HOLDER - 1 1/4" DIAMETER - NEW CONDITION - NMTB 40 - 40 TAPER *

  • Ashland, Wisconsin, United States
  • Jan 30th
GEAR CUTTER #5 - 5 PITCH HSS 1-1/4" BORE

GEAR CUTTER #5 - 5 PITCH HSS 1-1/4" BORE

  • Tallmadge, Ohio, United States
  • Jan 30th
2007 Fadal 4020HT CNC Vertical Machining Center w/Fadal MP-32 Control (#1262)

2007 Fadal 4020HT CNC Vertical Machining Center w/Fadal MP-32 Control (#1262)

  • Cincinnati, Ohio, United States
  • Jan 30th
Doall Dart 1" Band Saw Blade 100FT NIB 8 pitch/ .058 set/ .035 gage!

Doall Dart 1" Band Saw Blade 100FT NIB 8 pitch/ .058 set/ .035 gage!

  • Cleveland, Ohio, United States
  • Feb 13th
Toledo Power Hacksaw

Toledo Power Hacksaw

  • Canton, Ohio, United States
  • Feb 13th
18" X 20" METAL MIZER MODEL 2018 UNIVERSAL TILT-FRAME VERTICAL BAND SAW MARVEL

18" X 20" METAL MIZER MODEL 2018 UNIVERSAL TILT-FRAME VERTICAL BAND SAW MARVEL

  • Tremont, Illinois, United States
  • Feb 13th
EDM CAM Block, Used With System 3R Tooling

EDM CAM Block, Used With System 3R Tooling

  • Lake Zurich, Illinois, United States
  • Feb 13th
EDM Block, Used With System 3R Tooling

EDM Block, Used With System 3R Tooling

  • Lake Zurich, Illinois, United States
  • Feb 13th
EDM Tool Holding Block, Used With System 3R Tooling, For 20mm Shank

EDM Tool Holding Block, Used With System 3R Tooling, For 20mm Shank

  • Lake Zurich, Illinois, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies