Hi-speed 200Times/S Accuracy 0.1% LCR Meter 5MHz DC Bias Source USB LAN TH2826, US $5,750.00 – Picture 0

Hi-speed 200Times/S Accuracy 0.1% LCR Meter 5MHz DC Bias Source USB LAN TH2826, US $5,750.00 – Picture 1

Hi-speed 200Times/S Accuracy 0.1% LCR Meter 5MHz DC Bias Source USB LAN TH2826, US $5,750.00 – Picture 2

Hi-speed 200times/s Accuracy 0.1% Lcr Meter 5mhz Dc Bias Source Usb Lan Th2826

US $5,750.00

??, ???, China
Jan 29th

Open on mobile:
QR code

English operating menu is available. TH2826 series is a new generation impedance test instrument and firstly in conformity with LXI standard inland. It fulfills most low-voltage parameter measurement needs for components and materials with its basic accuracy (0.1%), wide frequency range(from 20Hz to 5MHz). The instrument is widely applied in microphone, resonator, inductor, ceramic capacitor, LCD, varactor and transformer .etc to analyze electrical performance and test low-ESR capacitor and high-Q inductor. With the super high test speed, TH2826 series is especially for frequency response curve analyzing of detector and piezoelectric device on auto production line. Its multiple output impedance mode can be used for different standards of inductor or transformer manufacturers. With its prominent performance, TH2826 series is in conformity with commercial and military standards, such as IEC and MIL standards. Features The first LCR meter with LXI standard in china Test level:10mV-5V with the resolution of 1mV The highest test speed up to 200times/s 5-digit display resolution Built-in DC bias source 4 signal source output impedance V,I test signal level monitor function 20 groups of setting for storage/load Multiple communication interfaces Optional Chinese and english language operating menu Test frequency: 20Hz-5MHz with the resolution of 10mHz Basic accuracy: 0.1 320*240 dot-matrix large graphic LCD display 22 parameter combinations available 10 points list sweep function Auto level control(ALC)function of voltage or current Graphic scanning and analyzing function Built-in comparator, 10 bins and bin counters 2m/4m cable length extension Specifications: Product Model: TH2826- LCR tester series LCR test parameter C, L, R,Z,Y,X,B, G, D, Q, ?,DCR Test frequency 20 Hz-5MHz,with step of 10mHz Test level range f 1MHz 10mV-1V,±(20%+10mV) constant level to 5V Output impedance 10?, 30?, 50?, 100? Basic accuracy 0.1% Test speed or time Fast: 200times/s(f>30KHz),100times/s(f>1KHz) middle: 25 times/s, slow: 5 times/s Equivalent circuit Serial and parallel Range mode Auto,hold Trigger mode Internal,manual,external and Bus Average time 1-255 Correction function Open/short sweep correction,load calibration Internal DC Bias source Voltage mode:-5V - +5V, ±(10%+10mV), step 1mV, Current mode(Internal resistance 50?): -100mA - +100mA, ±(10%+0.2mA),step 20uA Comparator function 10 bins:(9 bins pass,1 bin fail) and a AUX bin Memory 20 groups of setting value can be saved Interface USBDEVICE( USBTMC and USBCDC support), USBHOST(FAT16 and FAT32 ),LAN,RS232C, HANDLER, GPIB Display range R, X, Z Y, B, G C L D Q ?(DEG) ?% DCR 0.1m ? - 99.999 M? 0.0001 nS - 99.999 S 0.0001 pF - 9.9999F 0.0001 uH - 9.9999kH 0.0001 - 9.9999 0.0001 - 99999 -179.99°- 179.99° -999.99%-999.99% 0.0001 ? — 99.999 M? List sweep 10 points list sweep Displayer 320x240 dot matrix LCD Display mode Direct read, ?ABS, ?%, V/I(voltage/current monitor) ,bin No. and count

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	TH2826
Country/Region of Manufacture	China
MPN	TH2826