High Opaque Plastisol Ink – Quart-High Opaque White, US $360 – Picture 0

High Opaque Plastisol Ink – Quart-High Opaque White, US $360 – Picture 1

High Opaque Plastisol Ink – Quart-high Opaque White

US $360

Hackensack, New Jersey, United States
Nov 15th

Open on mobile:
QR code

High Opaque Plastisol Ink Phthalate Free, Ready to use For dark/light-colored fabrics Excellent High Opacity (Bleed Resistant Properties) In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP,DOP) STOCK, END-USE: Cotton, 50/50 cotton/polyester blends, and some synthetics. DESCRIPTION: High Opaque Plastisol Ink/PF-HO Series is popularized with its consistent high-opaque print result on dark and light colored textiles. It is a formulation compatible to most plastisol additives For quick and easy modification in many textile applications. High Opaque Plastisol Ink/PF-HO Series is ready to use straight from the container or can be extended up to 50% for light color applications. Important Note: High Opaque Plastisol Ink/PF-HO Series colors do not contain bleed inhibitors. When Bleed Resistance is of the utmost concern, use PF-BR Series. Note: Pre-test on actual substrate before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects. FINISH: Durable, soft-hand finish. COLORS: Available low-bleed opaque colors; formulated using non-leaded pigments. SCREEN FABRIC: Mesh counts up to 355 mono filament polyester (142T European Mesh). STENCIL: Dual-sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent CURE/DRYING: Heat-cure at approximately 320°F (160°C) for 2 to 3 minutes. Will not air-dry. MODIFICATIONS: To reduce ink viscosity with RE-703 or RE-704, add 5% or less (by weight of ink). Reducer is to be used very sparingly and only when RE-705 can be added up 10 to 20% (by weight of ink) if color shade or Opacity is not crucial. SQUEEGEE: When printing textiles, use a medium hard (65-75 durometer) squeegee. STORAGE: Plastisols respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings. PACKAGING: 1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *30-gallon (113.4 Liters) and 55-gallon (207.9 Liters). SAFETY & HANDLING: Refer to Material Safety Date Sheet (MSDS) for complete information. WASHUP SOLVENT: T-125 Wash up or equivalent. / SC-510 Biodegradable wash up. (Non-Petrochemical) MODIFIERS: PFGP-081 – Clear Extender Base / PFGP-084 – Softness Enhance / Base RE-703 – Quick Flash Reducer / RE-704 – Clear Reducer / RE-705 – Curable Reducer COLOR RANGE: All colors are formulated using non leaded pigments. *Other colors available upon request. Contact us for more details!