High Temperature Circulator Oil Bath 5l Room Temp ~300°c For Reactor Evaporator

US $640

shenzhen, China
Jun 5th

Open on mobile:
QR code

High Temperature Circulator oil bath 5L room temp ~300°C for reactor evaporator Description High Temperature Circulator oil bath 5L room temp ~300°C 8L/min for reactor Specifications 1.Water and oil temperature was up to 300 degrees. 2.Flow of outer circulation is 7~15L/min. Introduction This high temperature circulator is a new design of a high temperature heat source, suitable for jacketed reactor, chemical reaction, high temperature distillation, semiconductor industry. Feature 1 High temperature circulator is suitable for fermenter,jacketed glass reactor and other things. 2 Outside circulation could rise the temperature in the jacket,therefore materials in which would react. 3 Temperatur fluctuation is in ±0.2°C. 4 Resolution of digital display is 0.1°C. 5 Flow of outer circulation is 7~15L/min. 6 Auto-alarm of over temperature. 7 Stop heating when the temperature is over. 8 There are six models that can be chose:5L,10L,15L,20L,30L,50L. 9 Our high temperature adopts the newest control technique,easy to operate,great stability and high precise. 10 The PID can be set by yourself. 11 LED double window respectively digital temperature measurement and temperature setting value. 12 Microcomputer intelligent could modify the error of measuring value. Operation steps 1 Pour liquid into the sink,the distance between liquid level and the working platen should not less than 20mm. 2 Chose oil for the liquid.The initial temperature of the oil must higher than working temperature, range of which is more than 15°C. 3 Connect the out circulator pump with external equipment,which includes jacketed reactor, chemical reaction, high temperature distillation or other equipment.First connect outlet pipe with the inlet pipe of external equipment,then connect inlet pipe of the circulator pump with the outlet pipe of the external equipment. 4 Turn on the power,then switch the“POWER”button and the”CIRCULATOR”button on. Note 1 There must be liquid in the tank before switch the “POWER”button. 2 The power supply should be AC 220V/50Hz,and it should be connected with ground. 3 This high temperature circulator should be placed at dry and ventilated places,preventing heat and damps.There should be no objects around its back and sides in 300mm. 4 If you do not use it temporary,please turn off all buttons and the power. Parts and components 1 One circulator 2 One power line 3 One cover board 4 One piece of specification 5 One piece of certification 6 One piece of warranty car NOTE: 1. The voltage is 220V 50Hz, if you power supply is 110V, please kindly make sure you have the transformer to enable it work . 2.The viscosity of the oil or material should no more than 100 mPa.s or centipoises. The 50mPa.s dimenthyl-silicon oil is optimum heating material. 3. If you use the water, please choose pure water so that it will be encrusted. Technical details Model Volume(L) Tempreture(°C) Temperature fluctuations (°C) Flow (L/min) Tank size(mm) Tank Depth(mm) GX-2005 5 Normal~300 ±0.2 8 240*150*150 150 GX-2010 10 10 280*190*200 200 GX-2015 15 15 280*250*200 200 GX-2020 20 15 280*250*280 280 GX-2030 30 15 400*330*230 230 GX-2050 50 15 500*330*300 300 eBay Cross Border Trade powered by Channel Effect