Honeywell Vista 20P v9.18 w/6160 keypad and wave 2 two-tone siren, US $510 – Picture 0

Honeywell Vista 20P v9.18 w/6160 keypad and wave 2 two-tone siren, US $510 – Picture 1

Honeywell Vista 20P v9.18 w/6160 keypad and wave 2 two-tone siren, US $510 – Picture 2

Honeywell Vista 20p V9.18 W/6160 Keypad And Wave 2 Two-tone Siren

US $510

Howard Beach, New York, United States
Jan 30th

Open on mobile:
QR code

Features IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G Supports four graphic touchscreen keypads Wireless keys can be programmed without using zones Eight on-board hardwired zones standard (15 when Zone Doubling feature is used) – 40 hardwire expansion zones – 40 wireless expansion zones Two low current on-board trigger outputs 100 Event Log viewable at system keypads with time/date stamp 48 system user codes assignable to either partition Expandable to 48 total zones when used with hardwired and/or wireless expansion modules Two independent partitions plus a common partition – Global Arming from any system keypad – Go to function to view or operate one partition from the other – Separate partition account numbers 16 output devices – Relays (Model 4204 Relay Modules, or 4229 Expansion Module) Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes Supports four-wire and up to 16 two-wire smokes – Works with Sentrol CleanMe™ maintenance signal Multiple actions on output devices depending on system state – Turns lights off when system arms – Turns the same light on when system disarms – Flashes same lights when system is in alarm Built-in phone line cut monitor with programmable delay and annunciation options – Display on system keypads – Trigger local sounders – Trigger system bell Security Dealer Features Automatic System Load Shed – During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries. Dynamic Signaling – Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio Valuable End-User Features Viewable on system keypads: – Exit countdown – Time and date display* – Event log* Auto keypad backlighting on entry Keyswitch arming Programmable macro buttons and single-button arming Supports a variety of wireless remote controls for single-button operation User Scheduling – Latchkey reports to pagers – Auto arm/disarm – “User access” time windows VIP Module allows system control from any touchtone phone Chime by zone *Requires custom alpha keypad

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	HONEYWELL/ADEMCO
MPN	VISTA-20P
Model	VISTA-20P
Type	Control Panels & Keypads