+ Post new Ad
HORIZON TOOL CV751 GM Thermostat Wrench, US $31.08 – Picture 0
HORIZON TOOL CV751 GM Thermostat Wrench, US $31.08 – Picture 0

Horizon Tool Cv751 Gm Thermostat Wrench

US $31.08

  • Lakewood, New Jersey, United States
  • Aug 21st
Open on mobile:
QR code
HORIZON TOOL CV751 GM Thermostat Wrench A common job on these motors as is in all motors is thermostat replacement and to do this you must remove the thermostat housing. In these applications the bottom housing bolt is almost inaccessible without removing other parts until now. Our GM thermostat wrench with its unique shape and design will allow users to remove and install the housings in a fraction of the time it currently takes.Features. Reverse angle wrench to get at difficult GM Thermostat nuts.. 13mm 12 point with special bends specifically for GM V6 thermostat housings.. Unique shape and design will allow users to remove and install the housings on thermostats.. The GM Thermostat wrench is designed to work on GM3.1 and 3.4 liter V6 engines.. Made of heat treated steel.Reverse angle wrench to get at difficult GM Thermostat nuts. 13mm, 12 point with special bends specifically for GM V6 thermostat housings. Unique shape and design will allow users to remove and install the housings on thermostats. The GM Thermostat wrench is designed to work on GM3.1 and 3.4 liter V6 engines. Made of heat treated steel. Track Page Views With Auctiva's FREE Counter
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Horizon Tool Inc
Type Tools
MPN CV751
Prop 65 Yes
UPC Does not apply

Directions

Similar products from Wrenches

BETA TOOLS 990135 Hook Wrench w/Square Nose,135-145mm

BETA TOOLS 990135 Hook Wrench w/Square Nose,135-145mm

  • Buffalo Grove, Illinois, United States
  • Aug 25th
BETA TOOLS 900015 Double Deep Offset Ring Wrench,8x10mm

BETA TOOLS 900015 Double Deep Offset Ring Wrench,8x10mm

  • Buffalo Grove, Illinois, United States
  • Aug 25th
BETA TOOLS 900227 Double Offset Ring Wrench,5/8x3/4"

BETA TOOLS 900227 Double Offset Ring Wrench,5/8x3/4"

  • Buffalo Grove, Illinois, United States
  • Aug 25th
WILLIAMS 13610A Williams Adjustable Wrench,Black,10"

WILLIAMS 13610A Williams Adjustable Wrench,Black,10"

  • Buffalo Grove, Illinois, United States
  • Aug 25th
APT / Jiffy Pneumatic Pancake Drill 1/4-28 Threaded aircraft tool

APT / Jiffy Pneumatic Pancake Drill 1/4-28 Threaded aircraft tool

  • Canyon Lake, Texas, United States
  • Aug 25th
CANON 5D MARK II BODY ONLY AS-IS ERROR 30 CODE W/ LOW SHUTTER CT 9576

CANON 5D MARK II BODY ONLY AS-IS ERROR 30 CODE W/ LOW SHUTTER CT 9576

  • Wesley Chapel, Florida, United States
  • Aug 25th
Atlas Copco | ETP S7-120-13 Electric Hand Nutrunner 1/2" Drive CTADS (S4)

Atlas Copco | ETP S7-120-13 Electric Hand Nutrunner 1/2" Drive CTADS (S4)

  • Malad City, Idaho, United States
  • Aug 24th
CLECO Right Angle Nutrunner 40RNAL-204 1/2" Drive Nashville TN

CLECO Right Angle Nutrunner 40RNAL-204 1/2" Drive Nashville TN

  • Nashville, Tennessee, United States
  • Aug 23rd
Cleco 75RNL-3X-6 Reversible Nut Runner | 3/4" Drive | 245 Ft. Lbs. Max|120 RPM

Cleco 75RNL-3X-6 Reversible Nut Runner | 3/4" Drive | 245 Ft. Lbs. Max|120 RPM

  • Bear Lake, Michigan, United States
  • Aug 23rd
Williams 13610A Black Adjustable Wrench 10" NEW

Williams 13610A Black Adjustable Wrench 10" NEW

  • Alameda, California, United States
  • Aug 22nd
NOS INGERSOLL RAND 223 1/2'' INCH DRIVE PNEUMATIC IMPACT WRENCH IR223 300ft-lbs

NOS INGERSOLL RAND 223 1/2'' INCH DRIVE PNEUMATIC IMPACT WRENCH IR223 300ft-lbs

  • Middletown, Delaware, United States
  • Aug 20th
Mechanics M558DB 1/2'' Dr Impact Wrench Pneumatic

Mechanics M558DB 1/2'' Dr Impact Wrench Pneumatic

  • Ventura, California, United States
  • Aug 20th
Platinum PLT-99658 Xl Ratcheting Wrench, 8mm X 10mm, 12.41 Long, NEW IN PKG.

Platinum PLT-99658 Xl Ratcheting Wrench, 8mm X 10mm, 12.41 Long, NEW IN PKG.

  • Trenton, Missouri, United States
  • Aug 19th
Atlas Copco EP 10C HR13 *NEW* ErgoPulse Nutrunner EP10CHR13

Atlas Copco EP 10C HR13 *NEW* ErgoPulse Nutrunner EP10CHR13

  • Painesville, Ohio, United States
  • Aug 19th
Atlas Copco EP 6C HRF42 *NEW* ErgoPulse Nutrunner EP6CHRF42

Atlas Copco EP 6C HRF42 *NEW* ErgoPulse Nutrunner EP6CHRF42

  • Painesville, Ohio, United States
  • Aug 19th
INGERSOLL RAND D SERIES QE2TS00511Q04 NUT DRIVER NUTRUNNER #50C69PR4

INGERSOLL RAND D SERIES QE2TS00511Q04 NUT DRIVER NUTRUNNER #50C69PR4

  • Scottsburg, Indiana, United States
  • Aug 19th
Snap-On Tools Air Pneumatic Impact Ratchet Gun 3/8" Drive IM31A Vint (CP1071844)

Snap-On Tools Air Pneumatic Impact Ratchet Gun 3/8" Drive IM31A Vint (CP1071844)

  • Missoula, Montana, United States
  • Aug 18th
Packard PRW516/PHB316 Ratcheting Service Wrench & Hex Bit Adapter

Packard PRW516/PHB316 Ratcheting Service Wrench & Hex Bit Adapter

  • Bethlehem, United States
  • Aug 17th
CHICAGO PNEUMATIC CP7722 Impact Wrench,Air Powered,9500 rpm

CHICAGO PNEUMATIC CP7722 Impact Wrench,Air Powered,9500 rpm

  • Minooka, Illinois, United States
  • Aug 16th
CHICAGO PNEUMATIC CP6500RS Impact Wrench,Air Powered,6400 rpm

CHICAGO PNEUMATIC CP6500RS Impact Wrench,Air Powered,6400 rpm

  • Minooka, Illinois, United States
  • Aug 16th

People who viewed this item also vieved

Lot Of 9 Paslode Nailer Replacement Screws Part# 500518

Lot Of 9 Paslode Nailer Replacement Screws Part# 500518

  • Stow, Ohio, United States
  • Jan 30th
Paslode Main Valve Assembly, 500463, F350, F250S-PP, 5250-65C, 5300-75C, 5350_90

Paslode Main Valve Assembly, 500463, F350, F250S-PP, 5250-65C, 5300-75C, 5350_90

  • Stow, Ohio, United States
  • Jan 30th
Paslode # 500461 Replacement Nailer Upper Valve O-Ring

Paslode # 500461 Replacement Nailer Upper Valve O-Ring

  • Stow, Ohio, United States
  • Jan 30th
Spears 1413 Series PVC Tube Fitting, 90 Degree Elbow, Schedule 40, Gray, 1" Barb

Spears 1413 Series PVC Tube Fitting, 90 Degree Elbow, Schedule 40, Gray, 1" Barb

  • Minneapolis, Minnesota, United States
  • Jan 30th
1/4"- 8' COILED SPEEDAIRE ID BY 030 AIR HOSE!

1/4"- 8' COILED SPEEDAIRE ID BY 030 AIR HOSE!

  • Andover, Connecticut, United States
  • Jan 30th
Klein 71982 Type L2 Long-Nose Telephone Work Pliers

Klein 71982 Type L2 Long-Nose Telephone Work Pliers

  • United States
  • Jan 30th
BLUE POINT PNEUMATIC DRILL

BLUE POINT PNEUMATIC DRILL

  • Hollywood, Florida, United States
  • Jan 30th
Blue Point Air Drill Model AT800

Blue Point Air Drill Model AT800

  • Boston, Massachusetts, United States
  • Jan 30th
Milescraft 1300 Orbiter Any Angle Drilling and Driving Power Drill Attachment

Milescraft 1300 Orbiter Any Angle Drilling and Driving Power Drill Attachment

  • United States
  • Jan 30th
CLECO 116glfc-165a-04 PNEUMATIC RIGHT ANGLE GRINDER AIR TOOL NEW

CLECO 116glfc-165a-04 PNEUMATIC RIGHT ANGLE GRINDER AIR TOOL NEW

  • Eugene, Oregon, United States
  • Jan 30th
INGERSOLL RAND CA200 CYCLONE AIR DIE GRINDER 20,000 RPM COLLET NEEDS REPAIR

INGERSOLL RAND CA200 CYCLONE AIR DIE GRINDER 20,000 RPM COLLET NEEDS REPAIR

  • San Antonio, Texas, United States
  • Jan 30th
Ingersoll Rand 4" Air Angle Grinder - Super Heavy Duty - IR344 - NEW

Ingersoll Rand 4" Air Angle Grinder - Super Heavy Duty - IR344 - NEW

  • Brandon, South Dakota, United States
  • Jan 30th
Air Grinder/Drill

Air Grinder/Drill

  • Orlando, Florida, United States
  • Jan 30th
AIRCAT 1100-K 1/2" Twin Clutch Kevlar Composite Air Impact Wrench Gun Mini Oiler

AIRCAT 1100-K 1/2" Twin Clutch Kevlar Composite Air Impact Wrench Gun Mini Oiler

  • Walnut, California, United States
  • Jan 30th
SNAP ON CT30 3/8" DRIVE IMPACT WRENCH IN CASE

SNAP ON CT30 3/8" DRIVE IMPACT WRENCH IN CASE

  • Blue Point, New York, United States
  • Jan 30th
Ingersoll-Rand 105-D2 1/4" dr Air Ratchet (280 RPM)

Ingersoll-Rand 105-D2 1/4" dr Air Ratchet (280 RPM)

  • Alhambra, Illinois, United States
  • Jan 30th
TWO (2) JACOBS No36 & No34 Drill Chucks

TWO (2) JACOBS No36 & No34 Drill Chucks

  • Wilmington, North Carolina, United States
  • Jan 30th
CENTRAL PNEUMATIC AIR HAMMER 32940 150MM

CENTRAL PNEUMATIC AIR HAMMER 32940 150MM

  • Maricopa, California, United States
  • Jan 30th
Pro 510 Pneumatic Rivet Gun

Pro 510 Pneumatic Rivet Gun

  • New Paltz, New York, United States
  • Jan 30th
Air Riveter Gun Pneumatic

Air Riveter Gun Pneumatic

  • Norwalk, California, United States
  • Jan 30th
New 5/32" Huck Blind Bolt Pulling Head MS90353/54 Riveter Aircraft Tool 99-2701

New 5/32" Huck Blind Bolt Pulling Head MS90353/54 Riveter Aircraft Tool 99-2701

  • Scituate, Massachusetts, United States
  • Jan 30th
Senco Upholstery Stapler SJS 3/16"-5/16"

Senco Upholstery Stapler SJS 3/16"-5/16"

  • Englewood, Colorado, United States
  • Jan 30th
Bostitch MIII Floor Stapler Used Once

Bostitch MIII Floor Stapler Used Once

  • Hilton, New York, United States
  • Jan 30th
Stanley Sharpshooter Staples 1000X10mm 1-TRA206T

Stanley Sharpshooter Staples 1000X10mm 1-TRA206T

  • thessaloniki, plagiari, Greece
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies