Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 0

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 1

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 2

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 3

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 4

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 5

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 6

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 7

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 8

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 9

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 10

Hossfeld No. 2 Bender w/stand, 400lb of angle,tube and pipe dies arms for Hyd, US $2,300.00 – Picture 11

Hossfeld No. 2 Bender W/stand, 400lb Of Angle,tube And Pipe Dies Arms For Hyd

US $2,300.00

Conroe, Texas, United States
Mar 10th

Open on mobile:
QR code

Hossfeld No. 2 Bender with stand in good used condition. Includes 400-500lbs of dies as pictured. Dies include master dies and form dies for inbending and outbending of angle iron, flatbar the hard hard way, EMT tubing dies, 90-degree and 180 degree pipe dies, square tube dies and then the more typical pipe and pin sets. Lots of stuff. Also included are the hydraulic ratchet bar and bracing bar to set up with hydraulics, all you will need is a cylinder and a pump. The following is an incomplete list of the items included: 1” x 3" radius square tube, a five-piece set that includes the 116B 180-degree die draw block and back block roller and dowel. Hossfeld part 37976 sells for $300; 3/4” x 3”IR square tube bending set including an additional 116B 180 degree bending die, back block draw block and roller. No dowel; Hossfeld part 37957 sells for $300. Edge bend die set #20949 includes 1/4” spacers sells discounted for $100; Corner bending die #20717 Sells discounted for $44; sharp bending yoke light stock with nut parts #20697, #20705 sells for $107; eye bolt bending dog #20078, #20080 and #20705 selling for $84, $167, $18; self locking cam dies 20045, #20046, #20047 usually selling for $125; General purpose tool set #40061 $250; 1” x 8” radius 180 degree tube bending die set. includes dies, lead and following block part #23981 Sells for $350; 90 degree emt die set 1 1/4” x 6”. includes 73B die, back block, and draw block part #21255 $209; 90 degree emt die set 1 x 5” includes 72B die, back block and draw block #21239 $199; 1 1/4 x 3” radius sched 40 180-degree pipe bending die set. includes form die back block and draw block part #34500 $270; 1X 2 1/4” sch40 pipe 180 degree set. Three pieces part #33829 $242; 3/4’ x 2” schedule 40 180-degree pipe bender set. Three pieces # 33200 cost around $250; hydraulic attachments worth about $500 total and include Ratchet bar #49236 $248, swinging arm cylinder plates #49250 and swinging arm support arm #49244 $132; master die angle iron inbend set 20780 with master dies and arms 20781 and 8 outer radius blocks--6, 9, 12, 15, 18, 24, 30, 36 about $600 master die angle iron outbend set 20986 including 10 outer radius blocks 5, 6, 7, 9, 12, 15, 18, 24, 30, 36 and the five inner radius blocks. $700 Finally there is the Hossfeld bender no.2 and stand $600 along with the extension handle. There's a lot of value here. Shipping will be freight or your choice, weight of approximately 800lbs dimensions 48x42x36. i can box and palletize and drop off at a nearby shipper.

Condition:

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...

Brand

Hossfeld