Hotset 4062030 Hotrod Cartridge Heater 16.0mm Diameter 230v 200mm Length 500

US $360

USA, United States
Jun 9th

Open on mobile:
QR code

This Hotset 4062030 Hotrod 230V, 500W cartridge heater has a 16 mm diameter, is 200 mm long, and is suitable for use with packaging machines, extruders, casting machines, cutting knives, and other industrial tool-heating applications that require a heat source. It has a maximum watt density of 65W/sq. cm (419W/sq. inch) and a maximum Underwriters Laboratories (UL)-rated watt density of 57W/sq. cm. Its leads are mounted internally and sealed with ceramic. The heater has a European standard 1.4541 stainless steel sheath for resistance to corrosion and is filled with an NiCr (nichrome) 8020 heating conductor for high-temperature stability. The sheath has a maximum temperature rating of 750 degrees C (1,380 degrees F). The heater is rated for a maximum of 480V and has a maximum UL-rated voltage of 250V. It has an Ingress Protection (IP) rating of IP67 for protection from dust and from water when immersed to a depth of 1 m for up to 30 minutes. It is Verband der Elektrotechnik (VDE) certified for electrical safety and is Underwriters Laboratories (UL) and Underwriters Laboratories of Canada (cUL) Recognized for quality assurance. An H7-tolerance bore is recommended for this heater. This cartridge heater is suitable for a wide range of tool heating applications in the packaging, textile, and paper industries, among others. Specifications Heater diameter 16 mm Heater length 200 mm Power rating 500W Sheath material European standard 1.4541 stainless steel Heating conductor material NiCr 8020 Maximum sheath temperature 750 degrees C (1,380 degrees F) Maximum voltage 480V, UL rated to 250V Diameter tolerance -0.02 to -0.06 mm Maximum watt density 65W/sq. cm (419W/sq. inch), UL rated to 57W/sq. cm IP rating IP67 Wattage tolerance -10 to +10% High voltage test 1,500 VAC at an operating voltage of more than 24V; 500V at operating voltages less than or equal to 24V Insulation resistance Greater than or equal to 5 megohms at 500 VDC Leakage current Less than or equal to 0.5 mA at 253 VAC Length tolerance -1.5 to +1.5% maximum, -1 to +1 mm minimum Standards met VDE certified, UL and cUL Recognized Hotset manufactures heaters, heating elements, and related products for industrial applications. The company, founded in 1973, is headquartered in Ludenscheid, Germany.