HP 432C Thermistor Programmable Digital LED Power Meter, US $893.99 – Picture 0

HP 432C Thermistor Programmable Digital LED Power Meter, US $893.99 – Picture 1

HP 432C Thermistor Programmable Digital LED Power Meter, US $893.99 – Picture 2

HP 432C Thermistor Programmable Digital LED Power Meter, US $893.99 – Picture 3

Hp 432c Thermistor Programmable Digital Led Power Meter

US $893.99

Phoenix, Arizona, United States
Feb 26th

Open on mobile:
QR code

Click Here. Double your traffic. Get Vendio Gallery - Now FREE! HP 432C Thermistor Programmable Digital LED Power Meter Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from HP and may vary slightly due to upgrades, options, or revisions this unit may or may not have. These unites were either LED or converted to LED. They are fully tested and guaranteed to work for 30-days, parts and labor, excluding freight. Some may have front or rear connectors. We can set them for however you want if it is an issue. Key Features: Automatic zero High accuracy Recorder outputs, analog & digital Description: High accuracy - no thermoelectric error: high accuracy over a wide temperature range is featured on the 432 Power Meters. By measuring the output voltage of the thermistor bridges, and computing the corresponding power, even higher accuracy of ±0.2% ±0.5 µW can be obtained. Accuracy can be maintained on even the most sensitive range because the error due to thermoelectric effect is reduced to a negligible level. Specifications: Power Range: Four ranges with full scale readings of 10 and 100 µW, and 1 and 10 mW. Noise: Less than 0.25% of full scale peak (typical). Response Time: At recorder output, 35 ms time constant (typical). Fine Zero: Automatic, operated by front panel switch. Remote fine zero may be accomplished with the 432C. Zero Carryover: Less than 0.50% of full scale when zeroed on most sensitive range. Meter: Three digits with one digit overrange. 20% overrange capability on all ranges. Calibration Factor Control: 13-position switch normalizes meter reading to account for thermistor sensor calibration factor. Range 100% to 88% in 1% steps. Thermistor Sensor: Thermistor sensors are required for operation of the 432C. For microwave sensors HP 478B, 8478B, and 46 series work with the unit (probably much more as well). Recorder Output: Proportional to indicated power with 1 volt corresponding to full-scale. 1 kΩ output impedance. BCD Output: 8, 4, 2, 1 code: "1" positive. TTL compatible logic. Operates with HP 5150A, Opt 002 (BCD) Digital Recorder. "Print" and "Inhibit" lines available. Model 432C Control Lines: Instrument is referenced to +5 V, "Logic 0" is equivalent to 0 V. Power Consumption: 115 or 230 VAC ±10%, 50 to 400 Hz, 16 watts. Weight: 3.2 kg (7.2 lb) Dimensions: 130 mm W x 155 mm H x 279 mm D (5.2" x 6.1" x 11.0"). For More Pictures Please Click the Following: Picture 2 - Front View Picture 3 - Back View Picture 4 - Side View For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $10.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I need to know the following information: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 02/25/15 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

“These unites were either LED or converted to LED. They are fully tested and guaranteed to work for 30-days, parts and labor, excluding freight. Some may have front or rear connectors. We can set them for however you want if it is an issue.”