HP 8510C NETWORK ANALYZER w/8515A S-PARAMETER TEST SET 26.5 GHz TESTED GOOD, US $7,500.00 – Picture 0

HP 8510C NETWORK ANALYZER w/8515A S-PARAMETER TEST SET 26.5 GHz TESTED GOOD, US $7,500.00 – Picture 1

HP 8510C NETWORK ANALYZER w/8515A S-PARAMETER TEST SET 26.5 GHz TESTED GOOD, US $7,500.00 – Picture 2

HP 8510C NETWORK ANALYZER w/8515A S-PARAMETER TEST SET 26.5 GHz TESTED GOOD, US $7,500.00 – Picture 3

HP 8510C NETWORK ANALYZER w/8515A S-PARAMETER TEST SET 26.5 GHz TESTED GOOD, US $7,500.00 – Picture 4

HP 8510C NETWORK ANALYZER w/8515A S-PARAMETER TEST SET 26.5 GHz TESTED GOOD, US $7,500.00 – Picture 5

Hp 8510c Network Analyzer W/8515a S-parameter Test Set 26.5 Ghz Tested Good

US $7,500.00

Manchester, New Hampshire, United States
Jan 29th

Open on mobile:
QR code

YOU WILL RECEIVE A HP AGILENT 8510C NETWORK ANALYZER w/8515A S-PARAMETER TEST SET SOME DETAILS:THE UNIT IS SHOWN WORKING W/ A HP 8350B SWEEP OSC AND THE 83592B RF PLUG IN .01-20 GHz NOT INCLUDED IN THE SALE. 8510C W/ OPT 10 The Agilent 8510C, Vector Network Analyzer, continues to provide the best performance to meet your new design and test challenges. With unmatched accuracy and convenience, the Agilent 8510C vector network analyzer makes broadband measurements from 45 MHz to 50 GHz in 2.4 mm coax, from 45 MHz to 26.5 GHz in 1.0 mm coax The Agilent 8510C, Vector Network Analyzer, measures the magnitude, phase, and group delay of two-port networks to characterize their linear behavior. Thru-Reflect-Line precision two-port calibration for coaxial measurements Line-Reflect-Match calibration for on-wafer and in-fixture applications 45 MHz to 26.5 GHz frequency range Real-time error-corrected measurements 60 dB effective directivity and source match 80 to 100 dBm of dynamic range available 0.001 dB, 0.01 degree, 0.01 ns measurement resolution Data storage on an internal 3.5 disk drive or data output to an HP-IB or serial (RS-232) plotter or printer Four S-parameter color display Modular to configure to your needs HP 8615A S PARAMETER TEST SET he HP / Agilent 8515A s-parameter test set is available for the Agilent 8510C network analyzer for broadband coaxial measurements from 45 MHz to 50 GHz. The HP/Agilent 8515A test set has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch. For active device measurements, the test set includes the ability to apply dc bias (external) to the test port center conductors. Also available are two 90 dB step attenuators, which allow control of the port 1 and port 2 signal levels. Frequency Range: 45 MHz to 26.5 GHz Separate reference channel for each incident port Built-in electronic switch THE SYSTEM COMES WITH: 2 INTERCONNECT CABLES 08510-60102 & 08510-60101 3 HP BNC CABLES 3 POWER CORDS 1 SET MAINTANCE AND USER MANUALS FOR THE 8510C HARD COPY WE OFFER A DOMESTIC DOA WARRANTY WHICH MEANS ITEMS OUTSIDE THE USA ARE SOLD AS IS W/O RETURNS. THE STD 19" RACK IS AVL IF YOU WANT THE UNIT HOWEVER THE SHIPPING WILL NEED TO BE BY COMMON CARRIER SO THE COST WILL BE HIGH AND WE'LL NEED TO QUOTE YOU THE SHIPPING. IF YOU PICK THE UNIT UP YOU'LL SAVE A LOT ON THE SHIPPING AND WE'LL THROW IN THE RACK AT NO COST. THERE WILL BE THREE BOXES TO SHIP THE UNIT LESS THE RACK.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Model	NETWORK ANALYZER
Analyzer Type	Network Analyzers
MPN	8510C WITH 8615A
Unit Type	Complete Systems & Mainframes
Manufacturer	Agilent / HP
Country of Manufacture	United States