HP/Agilent N1207C Precision Vertical Beam Bender ASML 4022.481.65881, US $1,165.99 – Picture 0

HP/Agilent N1207C Precision Vertical Beam Bender ASML 4022.481.65881, US $1,165.99 – Picture 1

HP/Agilent N1207C Precision Vertical Beam Bender ASML 4022.481.65881, US $1,165.99 – Picture 2

HP/Agilent N1207C Precision Vertical Beam Bender ASML 4022.481.65881, US $1,165.99 – Picture 3

HP/Agilent N1207C Precision Vertical Beam Bender ASML 4022.481.65881, US $1,165.99 – Picture 4

HP/Agilent N1207C Precision Vertical Beam Bender ASML 4022.481.65881, US $1,165.99 – Picture 5

HP/Agilent N1207C Precision Vertical Beam Bender ASML 4022.481.65881, US $1,165.99 – Picture 6

Hp/agilent N1207c Precision Vertical Beam Bender Asml 4022.481.65881

US $1,165.99

Phoenix, Arizona, United States
Jan 30th

Open on mobile:
QR code

Click Here. Double your traffic. Get Vendio Gallery - Now FREE! Hewlett Packard / Agilent N1207C Precision Vertical Beam Bender Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Agilent and may vary slightly due to upgrades, options, or revisions this unit may or may not have. These units are spare inventory from ASML (A lithography company). List Price is: $3,498.00 NEW from Agilent (with a 6-week delivery time) The Unit's Serial Number Tag Reads: Model Number: N1207C Serial Number: US41090257 ASML Part Number: 4022.481.65881 Link to the Datasheet: Agilent N1203C, N1204C, N1207C, N1206T Optical Accessory Datasheet Description: The N1207C Precision Beam Benders contain a mirror at the center of a metal ball inside a precision optical mount. The benders precisely angle the beam, with a large degree of freedom around 90 degrees, without translating the beam. The N1207C bends the beam vertically. These components are used primarily to reduce cosine errors. Thermal Stability: The Agilent N1207C exhibits excellent thermal stability since all mounting components of the manipulator are of the same material. The optic (refracting window or mirror) is placed at the center of a ball which is suspended symmetrically in a spring nest. The symmetry of this design enables the contact points between the ball and the springs to remain precisely the same as the temperature changes. Hence, as the temperature changes, there is no rotation imparted to the ball. Mechanical Stability: The beam manipulator feet are designed not to slip due to differential thermal expansion between the stainless steel housing and an Invar mounting plate in the presence of an environmental temperature change of up to 20°C. Thus there will be no unrecoverable beam displacement due to foot slippage when mounting to many materials. Optical Input/Output Ports and Adjustment Access: The Agilent N1207C manipulators have six input and output (I/O) ports. There is only one mounting face. From this one mounting, either horizontal or vertical bends in any direction may be accomplished. Adjustment tools may be attached at any of ten access ports, allowing two of the I/O ports for entrance and exit of the laser beam. Specifications: Weight: 920 g Materials Used: Martensitic stainless steel, Optical grade glass Optical Efficiency: 99% typical, 97.5% worst case Input/Output Clear Aperture: Φ13.0 mm Input Beam Position Tolerance: ±1.6 mm for Φ9 mm beam Angular Beam Steering Range: (from nominal 90°, Φ9 mm beam centered on Φ13 mm Aperture): Yaw: ±6° (using Adjustment Lever and adapter at Φ25 mm port) Pitch: ±3° (using Adjustment Lever and adapter at Φ25 mm port) Yaw: ±0.7° (using Adjustment Lever only, at Φ9 mm port) Pitch: ±1° (using Adjustment Lever only, at Φ9 mm port) Angular Adjustment Sensitivity and Beam Steering: Resolution: 10 - 15 µradians (better with operator patience) Thermal Drift: Pitch: 5 µrad per °C Yaw: 0.5 µrad per °C Resonant Frequencies: The natural resonance of the spring-mass system (350 Hz) is completely suppressed. The first FFT measured resonance in the assembly is at 3.5 kHz. Thus, there is no resonance which could disturb laser beam alignment or position in the operating environment. Angular Adjustment Tool Leverage: Lever rotation : ball rotation = 2.9 : 1 For More Pictures Please Click the Following: Picture 2 - Top View Picture 3 - Back View Picture 4 - Side View #1 Picture 5 - Side View #2 Picture 6 - Side View #3 Picture 7 - Side View #4 For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $15.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. If you have any questions please email us at: ebay@mhzelectronics.com or call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 03/20/09 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“These units were spare inventory from ASML and are in like-new condition.”