+ Post new Ad
HPI-Pioneer HPS-08 BT 40 Mori Seiki 90 degree pull stud W/ coolant hole, US $9.00 – Picture 0
HPI-Pioneer HPS-08 BT 40 Mori Seiki 90 degree pull stud W/ coolant hole, US $9.00 – Picture 1
HPI-Pioneer HPS-08 BT 40 Mori Seiki 90 degree pull stud W/ coolant hole, US $9.00 – Picture 2
HPI-Pioneer HPS-08 BT 40 Mori Seiki 90 degree pull stud W/ coolant hole, US $9.00 – Picture 0
HPI-Pioneer HPS-08 BT 40 Mori Seiki 90 degree pull stud W/ coolant hole, US $9.00 – Picture 1
HPI-Pioneer HPS-08 BT 40 Mori Seiki 90 degree pull stud W/ coolant hole, US $9.00 – Picture 2

Hpi-pioneer Hps-08 Bt 40 Mori Seiki 90 Degree Pull Stud W/ Coolant Hole

US $9.00

  • El Cajon, California, United States
  • Jan 30th
Open on mobile:
QR code
You are looking at HPI-Pioneer, BT 40HPS-08 90 degree pull studs pulled from tooling that came with an old Shizuoka CNC mill. As we cannot use these parts and they are in great condition from a great maker we're hoping to get them to someone who can use them. These can be used with Mori Seiki BT 40 type machines. They might also be compatible with Lyndex B40-9000  and Command RB4M-0003. From HPS Literature: Part No.     A     B         C          D           E           F       G       H          T        Note HPS-O 8   90  0.591   1.102    1.378    2.362    0.394     -    0.669     M16     90 degree angle type
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer HPI-Pioneer
Brand HPI
Country/Region of Manufacture Japan
Model HPS-08

Directions

Similar products from BT Tool Holders

KENNAMETAL BT50 1-1/4" DIA. ENDMILL HOLDER GREAT COND. BT 50 END MILL LOT C10780

KENNAMETAL BT50 1-1/4" DIA. ENDMILL HOLDER GREAT COND. BT 50 END MILL LOT C10780

  • Dayton, Ohio, United States
  • Jan 30th
COMMAND BT40 COMPRESSION TENSION B4T4-0001 BT 40 BILZ #1 TAPPER LOT C8713

COMMAND BT40 COMPRESSION TENSION B4T4-0001 BT 40 BILZ #1 TAPPER LOT C8713

  • Dayton, Ohio, United States
  • Jan 30th
KENNAMETAL BT50 25MM DIA. ENDMILL HOLDER BT 50 END MILL EMH LOT C10562

KENNAMETAL BT50 25MM DIA. ENDMILL HOLDER BT 50 END MILL EMH LOT C10562

  • Dayton, Ohio, United States
  • Jan 30th
BT50 SANDVIK COROMANT VARILOCK-50 390.58-50 50 040 BT 50 VARILOCK LOT C10756

BT50 SANDVIK COROMANT VARILOCK-50 390.58-50 50 040 BT 50 VARILOCK LOT C10756

  • Dayton, Ohio, United States
  • Jan 30th
COLLIS BT50 1" DIA. ENDMILL HOLDER BT 50 END MILL LOT C10557

COLLIS BT50 1" DIA. ENDMILL HOLDER BT 50 END MILL LOT C10557

  • Dayton, Ohio, United States
  • Jan 30th
FETTE BT40 1-1/2" DIA. INSERT MILL PART # 11458 1.5x214 1950092 W LOT C9772

FETTE BT40 1-1/2" DIA. INSERT MILL PART # 11458 1.5x214 1950092 W LOT C9772

  • Dayton, Ohio, United States
  • Jan 30th
BT50 SANDVIK COROMANT VARILOCK-63 390.58-50 63 040 BT 50 VARILOCK LOT C10766

BT50 SANDVIK COROMANT VARILOCK-63 390.58-50 63 040 BT 50 VARILOCK LOT C10766

  • Dayton, Ohio, United States
  • Jan 30th
BT50 SANDVIK COROMANT VARILOCK-50 390.58-50 50 040 BT 50 VARILOCK LOT C10761

BT50 SANDVIK COROMANT VARILOCK-50 390.58-50 50 040 BT 50 VARILOCK LOT C10761

  • Dayton, Ohio, United States
  • Jan 30th
BT50 1" DIA. ENDMILL HOLDER GREAT COND. BT 50 END MILL LOT C10786

BT50 1" DIA. ENDMILL HOLDER GREAT COND. BT 50 END MILL LOT C10786

  • Dayton, Ohio, United States
  • Jan 30th
BT50 SANDVIK COROMANT VARILOCK-50 390.58-50 50 040 BT 50 VARILOCK LOT C10760

BT50 SANDVIK COROMANT VARILOCK-50 390.58-50 50 040 BT 50 VARILOCK LOT C10760

  • Dayton, Ohio, United States
  • Jan 30th
Lyndex Nikken 90 Degree BT 40 Pull Stud B40-5000S 08 06521. No coolant Hole.

Lyndex Nikken 90 Degree BT 40 Pull Stud B40-5000S 08 06521. No coolant Hole.

  • El Cajon, California, United States
  • Jan 30th
BT50 End Mill Holder 2" Kennametal !56A!

BT50 End Mill Holder 2" Kennametal !56A!

  • Saint Louis, Missouri, United States
  • Jan 30th
2 Parlec B40-32ER412 collet chucks

2 Parlec B40-32ER412 collet chucks

  • Chandler, Arizona, United States
  • Jan 30th
Bolton Tool BT40-SM3/4-1.77 Milling Collet Chuck Shell Mill Taper Adapter Holder

Bolton Tool BT40-SM3/4-1.77 Milling Collet Chuck Shell Mill Taper Adapter Holder

  • Pomona, California, United States
  • Jan 30th
Showa BT50 5/8" x 5.75" long end mill holder, new in box Japan made

Showa BT50 5/8" x 5.75" long end mill holder, new in box Japan made

  • Modesto, California, United States
  • Jan 30th
Showa BT50 1.5" center shell mill holder, new in box Japan made

Showa BT50 1.5" center shell mill holder, new in box Japan made

  • Modesto, California, United States
  • Jan 30th
Command BT40 B4C4 1000 Collet Holder

Command BT40 B4C4 1000 Collet Holder

  • Boca Raton, Florida, United States
  • Jan 30th
Command BT40 B4C4-1000 Collet Holder

Command BT40 B4C4-1000 Collet Holder

  • Boca Raton, Florida, United States
  • Jan 30th
KENNAMETAL BT50 1-1/4" DIA. ENDMILL HOLDER BT 50 END MILL EMH LOT C10561

KENNAMETAL BT50 1-1/4" DIA. ENDMILL HOLDER BT 50 END MILL EMH LOT C10561

  • Dayton, Ohio, United States
  • Jan 30th
BT50 SANDVIK COROMANT VARILOCK-50 390.58-50 50 040 BT 50 VARILOCK LOT C10758

BT50 SANDVIK COROMANT VARILOCK-50 390.58-50 50 040 BT 50 VARILOCK LOT C10758

  • Dayton, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

KENNAMETAL CAT 50 1-1/2" END MILL HOLDER 3-1/4" PROJECTION STK 5441

KENNAMETAL CAT 50 1-1/2" END MILL HOLDER 3-1/4" PROJECTION STK 5441

  • Wadley, Alabama, United States
  • Jun 4th
valenite though spindle coolant adapter

valenite though spindle coolant adapter

  • San Marcos, California, United States
  • Jun 4th
Lathe tool bit holder CTFPR-16-4

Lathe tool bit holder CTFPR-16-4

  • Ridgeley, West Virginia, United States
  • Jun 6th
SANDVIK * DCMT 07 02 08-PM 4325 * DCMT 2(1.5)2-PM 4325 Pack of 10 Inserts

SANDVIK * DCMT 07 02 08-PM 4325 * DCMT 2(1.5)2-PM 4325 Pack of 10 Inserts

  • Murphy, North Carolina, United States
  • Jun 6th
Morse Taper Adapter Sleeve MT1 to MT4 Lot of 7

Morse Taper Adapter Sleeve MT1 to MT4 Lot of 7

  • Middlebury, Indiana, United States
  • Jun 6th
Morse Taper Adapter Sleeve MT1 to MT4

Morse Taper Adapter Sleeve MT1 to MT4

  • Middlebury, Indiana, United States
  • Jun 6th
Ultra-Dex 1-1/2" Dia S24U MCLNR4 Boring Bar, Plus 10 KENNAMETAL CNMG432MN Insert

Ultra-Dex 1-1/2" Dia S24U MCLNR4 Boring Bar, Plus 10 KENNAMETAL CNMG432MN Insert

  • Houston, Texas, United States
  • Jun 6th
MACHINIST TOOL LATHE MILL Machinist Lot of Nice Boring Tool Cutters

MACHINIST TOOL LATHE MILL Machinist Lot of Nice Boring Tool Cutters

  • Morris Plains, New Jersey, United States
  • Jun 6th
LOT OF 9, BROWNING, H1-1/4, SPLIT TAPER BUSHING, 1-1/4" BORE

LOT OF 9, BROWNING, H1-1/4, SPLIT TAPER BUSHING, 1-1/4" BORE

  • Aliquippa, Pennsylvania, United States
  • Jun 7th
8 Pc Lot Bronze Bushing Insert Sleeves 3/4" ID Bore 1" OD 3/4" Long

8 Pc Lot Bronze Bushing Insert Sleeves 3/4" ID Bore 1" OD 3/4" Long

  • Lorain, Ohio, United States
  • Jun 7th
USED CUT OFF TOOL Holder Carbide Lathe GROOVING 5412 128-02 /USA

USED CUT OFF TOOL Holder Carbide Lathe GROOVING 5412 128-02 /USA

  • Houston, Texas, United States
  • Jun 11th
balas collet hardinge 30S #60 lot of TWO

balas collet hardinge 30S #60 lot of TWO

  • Cardington, Ohio, United States
  • Jun 11th
Used Albrecht 1/32" - 1/2" Keyless Drill Chuck on 1/2" Straight Shank

Used Albrecht 1/32" - 1/2" Keyless Drill Chuck on 1/2" Straight Shank

  • Harrison, New Jersey, United States
  • Jun 15th
JACOBS SUPREME MODEL NO 6T6 6 TAPER 0-1/2 CAP drill chuck LOT 26

JACOBS SUPREME MODEL NO 6T6 6 TAPER 0-1/2 CAP drill chuck LOT 26

  • Grayling, Michigan, United States
  • Jun 15th
ALORIS CA 2 TURNING BORING HOLDER

ALORIS CA 2 TURNING BORING HOLDER

  • Flagler Beach, Florida, United States
  • Jun 18th
ALORIS CA 41 BORING HOLDER

ALORIS CA 41 BORING HOLDER

  • Flagler Beach, Florida, United States
  • Jun 18th
Chicago Die Casting Buffing Mandrel 330 Bronze Bearings NEW NOS Made in USA!!

Chicago Die Casting Buffing Mandrel 330 Bronze Bearings NEW NOS Made in USA!!

  • Purlear, North Carolina, United States
  • Nov 12th
Chicago Die Casting Buffing Mandrel 1550 Ball Bearings NEW NOS Made in USA!!

Chicago Die Casting Buffing Mandrel 1550 Ball Bearings NEW NOS Made in USA!!

  • Purlear, North Carolina, United States
  • Nov 12th
400w ER11 3000-12000RPM DC Brushed spindle motor&Power Supply&MACH3

400w ER11 3000-12000RPM DC Brushed spindle motor&Power Supply&MACH3

  • DongGuan, China
  • Nov 13th
300w ER11 3000-12000RPM DC Brushed spindle motor&Power Supply&mount bracket CNC

300w ER11 3000-12000RPM DC Brushed spindle motor&Power Supply&mount bracket CNC

  • DongGuan, China
  • Nov 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies