+ Post new Ad
Hydramax 5ST Vise Jaw for Kurt CNC Vise Haas ,Mori Seki , Fadal CNC Mill, US $510.40 – Picture 0
Hydramax 5ST Vise Jaw for Kurt CNC Vise Haas ,Mori Seki , Fadal CNC Mill, US $510.40 – Picture 0

Hydramax 5st Vise Jaw For Kurt Cnc Vise Haas ,mori Seki , Fadal Cnc Mill

US $510.40

  • Monmouth, Oregon, United States
  • Jan 30th
Open on mobile:
QR code
The Hydramax Workholding System The Hydramax Workholding System is designed to allow multiple parts, with variations in size to be secured in a Kurt vise simultaneously. Problems usually associated with attempting to hold multiple parts in one vise are virtually eliminated. Save time and money without the hassles of broken cutters, scraped parts, or damaged fixtures. Also, fragile parts can be held securely, without crushing pressure. The system includes two jaws both equipped with our FastBack washer mounting plates. The solid jaw is replaced by a simple machinable aluminum soft jaw, while the moveable jaw is replaced by the Hydramax jaw. The Hydramax jaw incorporates several independently acting clamping pistons. These pistons compensate for variations in the parts being held. The self-contained hydraulic chamber within the jaw equalizes the pressure of the individual pistons, allowing the jaw to adapt to the parts being held for machining. Multiple systems are available with variations in the size and number of hydraulic pistons within the self-contained jaw unit. For inside diameter parts holding; look at the X-Pander System at the bottom of this page. FastBack Interchange System Based around the patented FastBack Bolt, this quick-change system allows the jaw to be changed in 3 strokes! This greatly increases productivity by reducing vise change setup time. rnrnThe jaws change easily without opening the vise or fastening bolts more than a single turn. A pair of vise jaws changes out in under a minute with the vise open or closed. Using a supplied 6-inch hex wrench to reach through the vise body, the FastBack Bolt is loosened, or tightened from the reverse sides of the vise. The system saves valuable set-up time on return jobs because it allows the jaws to be fastened while the parts are already held in the vise. 1A?aЂsA‚A - Hydramax 5ST Jaw 1A?aЂsA‚A - FastBack Soft Jaw 2 - FastBack Washer Plates 4 - FastBack Bolts 1 - FastBack Wrench

Directions

Similar products from Fittings & Plates

PERMANENT MAGNET SINE PLATE 4 1/2 Inch x 7 Inch SURFACE

PERMANENT MAGNET SINE PLATE 4 1/2 Inch x 7 Inch SURFACE

  • Chagrin Falls, Ohio, United States
  • Jan 30th
Drill Chuck Arbor R8 shank to J6 MT4 to J6 Machinist Tool sale

Drill Chuck Arbor R8 shank to J6 MT4 to J6 Machinist Tool sale

  • Ontario, California, United States
  • Jan 30th
SUBURBAN Open End Slotted Angle Plate - MODEL #: SAO080605

SUBURBAN Open End Slotted Angle Plate - MODEL #: SAO080605

  • Flushing, New York, United States
  • Jan 30th
Hartford Super Spacer 12" Master Index Plate 32 Notch

Hartford Super Spacer 12" Master Index Plate 32 Notch

  • Uxbridge, Massachusetts, United States
  • Jan 30th
Hartford Super Spacer 12" Master Index Plate 46 Notch

Hartford Super Spacer 12" Master Index Plate 46 Notch

  • Uxbridge, Massachusetts, United States
  • Jan 30th
Hartford Super Spacer 12" Master Index Plate 38 Notch

Hartford Super Spacer 12" Master Index Plate 38 Notch

  • Uxbridge, Massachusetts, United States
  • Jan 30th
Hardinge CHNC 3/8" 8 Station Top Turret Plate

Hardinge CHNC 3/8" 8 Station Top Turret Plate

  • Loves Park, Illinois, United States
  • Jan 30th
Phase II+ 226-214 12" x 15" x 12" 90 Degree T-Slot Tilting Angle Plate Table 3P

Phase II+ 226-214 12" x 15" x 12" 90 Degree T-Slot Tilting Angle Plate Table 3P

  • Saint Louis, Missouri, United States
  • Jan 30th
9" SOUTH BEND FACE PLATE 2.75"- 6 tpi B173

9" SOUTH BEND FACE PLATE 2.75"- 6 tpi B173

  • Roanoke, Indiana, United States
  • Jan 30th
7 x 10" Tilting Table for Milling Machines

7 x 10" Tilting Table for Milling Machines

  • Schaumburg, Illinois, United States
  • Jan 30th
NOS Busch Precision USA 8"X8"X6" SLOTTED GROUND ANGLE PLATE #3528 LIST $875

NOS Busch Precision USA 8"X8"X6" SLOTTED GROUND ANGLE PLATE #3528 LIST $875

  • Perth, Ontario, Canada
  • Jan 30th
de Whiton Machine Co 14" lathe chuck independent reversible 4 jaw. D1mount

de Whiton Machine Co 14" lathe chuck independent reversible 4 jaw. D1mount

  • DeKalb, Illinois, United States
  • Jan 30th
15.75" x 35.25" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

15.75" x 35.25" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

  • Grand Rapids, Michigan, United States
  • Jan 30th
38" x 10.25" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

38" x 10.25" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

  • Grand Rapids, Michigan, United States
  • Jan 30th
35" x 7.25" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

35" x 7.25" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

  • Grand Rapids, Michigan, United States
  • Jan 30th
39.5" x 20" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

39.5" x 20" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

  • Grand Rapids, Michigan, United States
  • Jan 30th
Harding A2-8 Threading Face Plate 5" Dia

Harding A2-8 Threading Face Plate 5" Dia

  • Waterford, Michigan, United States
  • Jan 30th
Aluminum Pro Channel 3/4 x 3/4 x 3/4 x 48 in, 1/16 in thick, .75 in, U, C, .75

Aluminum Pro Channel 3/4 x 3/4 x 3/4 x 48 in, 1/16 in thick, .75 in, U, C, .75

  • Old Fort, North Carolina, United States
  • Jan 30th
5 x 7" Tilting Table for Milling Machines

5 x 7" Tilting Table for Milling Machines

  • Schaumburg, Illinois, United States
  • Jan 30th
(4) JERGENS 20mm SHANK BALL LOCKS FOR MOUNTING SYSTEM # 49601

(4) JERGENS 20mm SHANK BALL LOCKS FOR MOUNTING SYSTEM # 49601

  • Chino, California, United States
  • Jan 30th

People who viewed this item also vieved

Precision fixture and a 4" angle plate

Precision fixture and a 4" angle plate

  • Streamwood, Illinois, United States
  • Mar 10th
Erickson - 1086623 - Double Angle Collets DA Coolant Collet Series: DA200

Erickson - 1086623 - Double Angle Collets DA Coolant Collet Series: DA200

  • New Bedford, Massachusetts, United States
  • Mar 10th
PRATT & WHITNEY P&W 5/8" COLLET FOR JIG BORE MACHINE MORE LISTED LOT C12011

PRATT & WHITNEY P&W 5/8" COLLET FOR JIG BORE MACHINE MORE LISTED LOT C12011

  • Dayton, Ohio, United States
  • Mar 10th
Destaco Hold Down Clamp 210-SB

Destaco Hold Down Clamp 210-SB

  • Belmont, North Carolina, United States
  • Apr 23rd
Lot of 2 Kant Twist T-Handle Cantilever Clamps High Tensile Steel 3" & 6"

Lot of 2 Kant Twist T-Handle Cantilever Clamps High Tensile Steel 3" & 6"

  • Poplar Grove, Illinois, United States
  • Apr 23rd
LOT-7Adjustable#1440-4"c-clamps IN GREAT CONDITION.

LOT-7Adjustable#1440-4"c-clamps IN GREAT CONDITION.

  • Palm Harbor, Florida, United States
  • Apr 23rd
ANTIQUE 13 LBS. 9" x 4" CAST IRON ANVIL SMALL SIZE JEWELRY BENCH WORK =M1014

ANTIQUE 13 LBS. 9" x 4" CAST IRON ANVIL SMALL SIZE JEWELRY BENCH WORK =M1014

  • Chicopee, Massachusetts, United States
  • May 1st
Top Jaws For 6" Lathe Chuck  - American Pattern Style - NOS

Top Jaws For 6" Lathe Chuck  - American Pattern Style - NOS

  • Bountiful, Utah, United States
  • May 2nd
4" 3 JAW CHUCK WOTH 5C BACK STK2719

4" 3 JAW CHUCK WOTH 5C BACK STK2719

  • Wadley, Alabama, United States
  • May 2nd
SNAP ON, WILTON 50lb VISE MECHANICS PLUMBERS 5" JAWS VINTAGE, EXCELLENT

SNAP ON, WILTON 50lb VISE MECHANICS PLUMBERS 5" JAWS VINTAGE, EXCELLENT

  • Sherwood, Arkansas, United States
  • May 2nd
Kurt 6" Double Vise

Kurt 6" Double Vise

  • Hayward, California, United States
  • May 2nd
Bison 5" 3-Jaw (2-Pcs. Rev.) Self-Centering Rotating Lathe Chuck w/MT#4 Shank

Bison 5" 3-Jaw (2-Pcs. Rev.) Self-Centering Rotating Lathe Chuck w/MT#4 Shank

  • Hamden, Connecticut, United States
  • May 3rd
MT3 DEAD CENTER

MT3 DEAD CENTER

  • Willow Spring, North Carolina, United States
  • Jun 24th
KO Lee Tailstock Set BC22 L and R Tool Grinding Centers and 2 BC71 Holder Clamps

KO Lee Tailstock Set BC22 L and R Tool Grinding Centers and 2 BC71 Holder Clamps

  • Liberal, Kansas, United States
  • Jun 25th
3MT LIVE CENTER

3MT LIVE CENTER

  • El Monte, California, United States
  • Jun 25th
Hardinge #300 5C Work Locating Stop, New

Hardinge #300 5C Work Locating Stop, New

  • Franklin, Tennessee, United States
  • May 30th
ZIMM MSZ-50-SN Heavy Duty Screw Jack MSZ-50-SN-2E

ZIMM MSZ-50-SN Heavy Duty Screw Jack MSZ-50-SN-2E

  • Ashdod, Israel
  • May 30th
Misumi Hardened Steel Flanged Bushings 8mm ID - Lot of 8 JBHN8-8 NEW

Misumi Hardened Steel Flanged Bushings 8mm ID - Lot of 8 JBHN8-8 NEW

  • Kitchener, Ontario, Canada
  • May 30th
(NEW) SHERLINE 8700 ROTARY TABLE INDEXER WITH ANGLE PLATE

(NEW) SHERLINE 8700 ROTARY TABLE INDEXER WITH ANGLE PLATE

  • Encinitas, California, United States
  • Jun 3rd
MACHINIST LATHE MILL Machinist Micro Small Rotary Table T Slot Fixture 5 1/2"

MACHINIST LATHE MILL Machinist Micro Small Rotary Table T Slot Fixture 5 1/2"

  • Morris Plains, New Jersey, United States
  • Jun 3rd
40" WISCONSIN VERTICAL ROTARY TABLE, MDL VHP - VGF, 2 DEGREE 180 POSITION, 1995

40" WISCONSIN VERTICAL ROTARY TABLE, MDL VHP - VGF, 2 DEGREE 180 POSITION, 1995

  • Waukesha, Wisconsin, United States
  • Jun 3rd
Anton V-438 Magnetic Transfer V-Block (FP) Matched Pair 90 Degree

Anton V-438 Magnetic Transfer V-Block (FP) Matched Pair 90 Degree

  • Chalfont, Pennsylvania, United States
  • Jun 3rd
MACHINIST TOOL LATHE MILL Machinist Tool Makers Block Fixture for Set Up fdsaf

MACHINIST TOOL LATHE MILL Machinist Tool Makers Block Fixture for Set Up fdsaf

  • Morris Plains, New Jersey, United States
  • Jun 3rd
TTC AP-3 SOLID ANGLE PLATE

TTC AP-3 SOLID ANGLE PLATE

  • Flushing, New York, United States
  • Jun 3rd
Felting Needle Tool II-

Felting Needle Tool II-

  • Hickory Hills, Illinois, United States
  • Jun 9th
MagEyes Magnifier Lens-#7 (2.75x)

MagEyes Magnifier Lens-#7 (2.75x)

  • Hickory Hills, Illinois, United States
  • Jun 9th
"Stencil1 8.5""X11"" Stencil-Polaroid"

"Stencil1 8.5""X11"" Stencil-Polaroid"

  • Hickory Hills, Illinois, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies