Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: IDEAL 1310 SM Fiber Adapter P/N: 0012-00-0338 (BC# 22836) IDEAL 1550 SM Fiber Adapter P/N: 0012-00-0339 (BC# 22835) IDEAL 850 MM Fiber Adapter P/N: 0012-00-0336 (BC# 22837) IDEAL 1300 MM Fiber Adapter P/N: 0012-00-0337 (BC# 22838) FiberTEK Quick Reference Card (2) SM FF-FC Duplex Fiber Cables (2) MM ST-ST Duplex Fiber Cable (4) Fiber Wipes Hard Copy User Manual Hard Carrying Case BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! IDEAL FiberTEK SingleMode 1310nm / 1550nm & Multimode 850nm / 1300nm Fiber Adapter Set For Use With Ideal LanTEK 6, 6A, 7 & 7G LAN Cable Certifier Sets (LAN Cable Certifier Not Included In Sale!) Test & Certify Singlemode 1310nm / 1550nm & Multimode 850nm / 1300nm Fiber Cabling Installations! Includes Hard Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Warranty: 90 Day Exchange Warranty Ideal Lantek SM 1310/1550nm MM 850/1300nm Fiber Adapter Set Singlemode The Singlemode kit contains two adapters, a 1310 nm Fabry Perot laser with receiver and a 1550 nm Fabry Perot laser source with receiver. Using only one of the adapters, in the display unit, length and delay can be measured in loop-back mode. Using both the display and remote units enables signal loss, dual wavelength, and bi-directional measurements. Two methods are available for computing loss budget. The installer can input the type of fiber under test and the number of connectors and splices and have the loss budget automatically calculated. Or the user can input the loss value for each connector and splice to explicitly determine the loss budget. The adapters fit entirely into the display and remote units and lock into place. There are no bulky adapters extending from the end of the units, creating a product that is easy to handle and producing accurate and repeatable results. Specifications: Detector Receive Wavelength: SM: 1310nm and 1550nm Measurement Accuracy ±0.03 - 0.05 dB @ -20dBm Dynamic Range: SM: -53 dBm Fiber Type 9.0/50/62.5/125 micron Detector Type INGaAs Power Output: 1310 (SM): -10 dBm into SM Fiber 1550 (SM): -10 dBm into SM Fiber Length: MM 850/1300 nm: 1.0 meter Source Type 1310 (SM): Fabry Perot Laser 1550 (SM): Fabry Perot Laser Signal Loss Dynamic Range (SM) 0 to -40 dB at Specified Accuracy Cable Length Distance Range 1310 (SM) to 10 km 1550 (SM) to 10 km Propagation Delay Accuracy Resolution Range ±4% or ±2.0 ns (the greater of) ±1.2 - 1.5 ns 0 – 300 ms Network Specifications 1000BASESX/LX (Gigabit Ethernet) ATM-155, ATM-622 Legacy Networks 100BASE-F 10BASE-FL, 10BASE-FL/FB, Multimode The multimode 850nm/1300nm LanTek fiber adapters are the perfect solution for certifying or troubleshooting fiber backbones and fiber to the desktop installations in commercial buildings or campus environments. Working with LANTEK® 6 & 7, it measures signal loss and length over Multimode fiber. With an easy fiber adapter switch, it can support dual wavelength and bidirectional testing. Using adapters, the LANTEK display unit can measure length in the loop-back mode. Using it in both the display and remote units, the system can measure signal loss and length with dual wavelength and bi-directional capabilities. Specifications: Detector Receive Wavelength: MM: 850 nm, 1300 nm Measurement Accuracy Attenuation: MM 850/1300 nm: 0.25dB Length: (+/- 3%) + 1 meter Display Resolution Attenuation: MM 850/1300 nm: 0.1dB Length: MM 850/1300 nm: 1.0 meter Linearity 0.2 dB Length Range MM 850 nm: 3,000 meters MM 1300 nm: 6,000 meters Minimum Length 5 meters Physical Operating Temperature: Ambient Airflow: 18 to 30°C at Specified Accuracy 0.3 Ms @ 20°C Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Manage all your eBay listings with Kyozou eBay Listing Software
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
