Infrared(ir) Based Digital Object Counter Diy Electronic Kit.

US $20.50

  • Melbourne, VIC, Australia
  • Jan 29th
SHIPPING FROM: MELBOURNE, AUSTRALIA Description: A digital object counter can be used for counting objects. It can used for fun at home for counting objects or people entering inside a room. Since it's a DIY kit, it can be used for learning basic electronics. It has not been designed for any industrial purposes. It does not use microcontroller and there is no output for connecting to microcontrollers or other systems.  Target users: Engineering Students, Electronic Amateurs, Beginners and Hobbyists.  This DIY digital object counter works with TSOP4838 infrared receiver and there are two seven segment displays displaying numbers from 0 to 99.   An IR transmitter is oriented towards the TSOP4838 infrared receiver of counter module and objects are moved between the two modules. Each time an object passes between the two modules, the seven segment displays show increment in numbers. Comes as a pack of parts kit[NOT ASSEMBLED] and can be easily assembled if you can follow the silkscreen indicators (labels) and have beginning experience with a soldering iron. You will need to read the resistor bands or use a multimeter to determine the resistor sizes. Both the kits operate with 9V batteries. Features: The distance between the transmitter and receiver modules can be around 1 meter. The counter module can be reset to 0 at any time and restart the counting. The counter module can be operated with any kind of remote control. Therefore, it can also be used as a remote tester. For each press on the remote control, there is an increment in number.   Operate with two 9V batteries. One battery for each kit. Kit package contains components for counter and IR transmitter modules: A. Components for counter module 1 x TO-92 5V Voltage Regulator (78L05) 2 x CD4026 Decade counter 2 x 16-pin IC socket. 2 x common cathode seven segment display-(Can be in red, yellow and blue colors) 1 x TSOP4838 Infrared sensor 1 x 100uF Capacitor- (Voltage rating can be between 16V to 50V- causes no problem in operation) 2 x 0.1uF 50V ceramic Capacitor 2 x 3mm LED- (can be RED, WHITE, BLUE, GREEN or YELLOW color) 1 x BC547 1 x BC557 1 x SPDT Slide Switch 1 x Tactile reset switch 1 x  Screw terminal- (can be in blue/green colors) 4 x 1K Ohm Resistor 1/4W     1 x 330R Resistor 1/4W 1 x 10K Ohm Resistor 1/4W 1 x Bare PCB with Silkscreen Indicators (Check PCB)  B. Components for IR transmitter module 1 x NE555 timer chip 1 x 8-pin IC socket. 1 x transparent Infrared LED 1 x 0.1uF 50Vceramic Capacitor - code 104 1 x 0.001uF 50V ceramic Capacitor - code 102 1 x SPDT Slide Switch 1 x  Screw terminal 1 x 330R Resistor 1/4W 1 x 10K Ohm Resistor 1/4W 1 x 18K Ohm Resistor 1/4W    1 x Bare PCB with Silkscreen Indicators (Check PCB ) We do not send hard copy of manual or circuit diagram along with the kit package.  All the circuit and assembly instructions can be downloaded from the links given below: Documents: About digital object counter Assembly tutorial- Counter module Assembly tutorial- IR transmitter module Schematic Object counter manual- in pdf format Flickr Images Video: https://www.youtube.com/watch?v=FzYltHXqVeQ
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
MPN Object Counter
Recommended Age Range 16 years and above
Country of Manufacture Finland
Gender Boys & Girls
Character Family DIY electronics

Directions

Similar products from PCB boards & Kits

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies