+ Post new Ad
Ingersoll 1.500" QUAD-DRILL Indexable Drill 3xD Coolant Fed (Q0381114N6R01), US $325.00 – Picture 0
Ingersoll 1.500" QUAD-DRILL Indexable Drill 3xD Coolant Fed (Q0381114N6R01), US $325.00 – Picture 1
Ingersoll 1.500" QUAD-DRILL Indexable Drill 3xD Coolant Fed (Q0381114N6R01), US $325.00 – Picture 2
Ingersoll 1.500" QUAD-DRILL Indexable Drill 3xD Coolant Fed (Q0381114N6R01), US $325.00 – Picture 0
Ingersoll 1.500" QUAD-DRILL Indexable Drill 3xD Coolant Fed (Q0381114N6R01), US $325.00 – Picture 1
Ingersoll 1.500" QUAD-DRILL Indexable Drill 3xD Coolant Fed (Q0381114N6R01), US $325.00 – Picture 2

Ingersoll 1.500" Quad-drill Indexable Drill 3xd Coolant Fed (q0381114n6r01)

US $325.00

  • Round Lake, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
Ingersoll QUAD-DRILL Coolant Fed 3xD Indexable Drill (Q0381114N6R01) Nominal Diameter:  1.500" Shank Diameter:  1.250" Drilling Length:  4.50" Overall Length:  8.70" Coolant Fed:  Yes Insert Style:  SHLT 110408N-PH1 This drill is new in factory packaging. Will ship out one day after receipt of payment.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Ingersoll
MPN 3211641
Model Q0381114N6R01

Directions

Similar products from Coolant Gun Drills

Exair Cold Air Vortec Cooling Gun

Exair Cold Air Vortec Cooling Gun

  • Unionville, Pennsylvania, United States
  • Jan 30th
CJT Kool Twist 18.5 MM Drill Bit 296 Style through coolant

CJT Kool Twist 18.5 MM Drill Bit 296 Style through coolant

  • Casco, Michigan, United States
  • Jan 30th
Kobelco 13/16" x 10-1/4" (OAL) List 2625 2 FLT Oil-Hole Drill - Straight Shank

Kobelco 13/16" x 10-1/4" (OAL) List 2625 2 FLT Oil-Hole Drill - Straight Shank

  • Hamden, Connecticut, United States
  • Jan 30th
USA Made 1-1/8" x 11" (OAL) 2 FLT Slow Helix Oil-Hole Drill - Straight Shank

USA Made 1-1/8" x 11" (OAL) 2 FLT Slow Helix Oil-Hole Drill - Straight Shank

  • Hamden, Connecticut, United States
  • Jan 30th
WE-K3-60-2-J KUB KOMET Kennametal Cutting D5055130 Drill Drilling Insert Pocket

WE-K3-60-2-J KUB KOMET Kennametal Cutting D5055130 Drill Drilling Insert Pocket

  • Huntington Beach, California, United States
  • Jan 30th
WE-K2-53-2J KUB KOMET D5055120 Kennametal Cutting Drill Drilling Insert Pocket

WE-K2-53-2J KUB KOMET D5055120 Kennametal Cutting Drill Drilling Insert Pocket

  • Huntington Beach, California, United States
  • Jan 30th
SANDVIK COROMANT R840-1040-70-A1A 1220 Coolent Fed Drill,Bore 0.4094,OAL 5.5118

SANDVIK COROMANT R840-1040-70-A1A 1220 Coolent Fed Drill,Bore 0.4094,OAL 5.5118

  • Minneapolis, Minnesota, United States
  • Jan 30th
SANDVIK COROMANT R840-0990-50-A1A 1220 Coolant Fed Drill,Bore 0.3898,OAL 4.0551

SANDVIK COROMANT R840-0990-50-A1A 1220 Coolant Fed Drill,Bore 0.3898,OAL 4.0551

  • Minneapolis, Minnesota, United States
  • Jan 30th
#8 SPECIAL CENTER DRILLS w/ COOLANT THRU [Qty/115] ~NEW~OLD~STOCK~

#8 SPECIAL CENTER DRILLS w/ COOLANT THRU [Qty/115] ~NEW~OLD~STOCK~

  • Orwell, Ohio, United States
  • Jan 30th
SANDVIK A880-D1062P31-04 CoroDrill Holder

SANDVIK A880-D1062P31-04 CoroDrill Holder

  • Windsor, Connecticut, United States
  • Jan 30th
Ingersoll 1" QUAD-DRILL Indexable Drill 3xD Coolant Fed (Q0254076N6R01)

Ingersoll 1" QUAD-DRILL Indexable Drill 3xD Coolant Fed (Q0254076N6R01)

  • Round Lake, Illinois, United States
  • Jan 30th
.4450 Solid Carbide oil hole gun drill SPADE drill TiN, 2 Flute, 6” LOC, 11" OAL

.4450 Solid Carbide oil hole gun drill SPADE drill TiN, 2 Flute, 6” LOC, 11" OAL

  • Cleveland, Ohio, United States
  • Jan 30th
.4450 Solid Carbide oil coolant gun/spade drill 2 Flute, 6” LOC, 11” OAL TiN

.4450 Solid Carbide oil coolant gun/spade drill 2 Flute, 6” LOC, 11” OAL TiN

  • Cleveland, Ohio, United States
  • Jan 30th
15.6 MM Mitsubish Solid Carbide Drill With Thru Coolant

15.6 MM Mitsubish Solid Carbide Drill With Thru Coolant

  • Advance, North Carolina, United States
  • Jan 30th
KOOL MIST Quick On-Off Control Air Switch - Model : 264

KOOL MIST Quick On-Off Control Air Switch - Model : 264

  • Flushing, New York, United States
  • Jan 30th
EXAIR Cold Gun Air Coolant System

EXAIR Cold Gun Air Coolant System

  • Southington, Connecticut, United States
  • Jan 30th
GUHRING DRILL CARBIDE INSERT 17 mm HT800 17,0 WN R-HTW

GUHRING DRILL CARBIDE INSERT 17 mm HT800 17,0 WN R-HTW

  • Osipovichi, Mogilev region, Belarus
  • Jan 30th
GUHRING INDEXABLE DRILL HT800 04048 - 17,000 (17,0-17,999) 7D

GUHRING INDEXABLE DRILL HT800 04048 - 17,000 (17,0-17,999) 7D

  • Osipovichi, Mogilev region, Belarus
  • Jan 30th
MITSUBISHI INDEXABLE DRILL TAWSN 2000 S25 (19,5-20,4mm) 3D +2 TAWNH 1980T VP15TF

MITSUBISHI INDEXABLE DRILL TAWSN 2000 S25 (19,5-20,4mm) 3D +2 TAWNH 1980T VP15TF

  • Osipovichi, Mogilev region, Belarus
  • Jan 30th
CJT/KOOLCARB 1" THROUGH COOLANT CARBIDE TIPPED DRILL BIT

CJT/KOOLCARB 1" THROUGH COOLANT CARBIDE TIPPED DRILL BIT

  • Wadley, Alabama, United States
  • Jan 30th

People who viewed this item also vieved

TAPER LENGTH DRILL 31/64"{.4844"}DIAM HIGH SPEED 118DG PT BLK OX NEW TITEX $3.85

TAPER LENGTH DRILL 31/64"{.4844"}DIAM HIGH SPEED 118DG PT BLK OX NEW TITEX $3.85

  • North Tonawanda, New York, United States
  • Jun 1st
TAPER LENGTH DRILL 13/32"{.4062"}DIAM HIGH SPEED 118DG PT BLK OX NEW TITEX $3.45

TAPER LENGTH DRILL 13/32"{.4062"}DIAM HIGH SPEED 118DG PT BLK OX NEW TITEX $3.45

  • North Tonawanda, New York, United States
  • Jun 1st
TAPER LENGTH DRILL 25/64"{.3906"}DIAM HIGH SPEED 118DG PT BLK OX NEW TITEX $3.25

TAPER LENGTH DRILL 25/64"{.3906"}DIAM HIGH SPEED 118DG PT BLK OX NEW TITEX $3.25

  • North Tonawanda, New York, United States
  • Jun 1st
PTD 25/32 x # 3 Taper Shank Twist Drill Bit

PTD 25/32 x # 3 Taper Shank Twist Drill Bit

  • Coventry, Rhode Island, United States
  • Jun 3rd
C & L 63/64" x # 3 Taper Shank Drill Bit

C & L 63/64" x # 3 Taper Shank Drill Bit

  • Coventry, Rhode Island, United States
  • Jun 3rd
REPUBLIC 49/64" x #3 Taper Shank Twist Drill Bit Unit # 5

REPUBLIC 49/64" x #3 Taper Shank Twist Drill Bit Unit # 5

  • Coventry, Rhode Island, United States
  • Jun 3rd
LMT Onsrud 63-760 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright)

LMT Onsrud 63-760 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright)

  • USA, United States
  • Jun 3rd
3/16" M.A. Ford Solid Carbide 135deg Straight-Flute & Die Drill Bit

3/16" M.A. Ford Solid Carbide 135deg Straight-Flute & Die Drill Bit

  • Sullivan, Missouri, United States
  • Jun 3rd
SOLID CARBIDE DRILL 27/64" DIAx2" FL LGTH 3/8"SH W/3FLTS TSC {USA} NEW $22.00

SOLID CARBIDE DRILL 27/64" DIAx2" FL LGTH 3/8"SH W/3FLTS TSC {USA} NEW $22.00

  • North Tonawanda, New York, United States
  • Jun 3rd
9/16" (.5625) JOBBER (STD) CARBIDE 25 deg HELIX 118 deg SPLIT PT DRILL "NEW"

9/16" (.5625) JOBBER (STD) CARBIDE 25 deg HELIX 118 deg SPLIT PT DRILL "NEW"

  • Largo, Florida, United States
  • Jun 4th
1/2" (.5000) JOBBER (STD) CARBIDE 25 deg HELIX 118 deg SPLIT PT DRILL "NEW"

1/2" (.5000) JOBBER (STD) CARBIDE 25 deg HELIX 118 deg SPLIT PT DRILL "NEW"

  • Largo, Florida, United States
  • Jun 4th
31/64" (.4844) JOBBER (STD) CARBIDE 25 deg HELIX 118 deg SPLIT PT DRILL "NEW"

31/64" (.4844) JOBBER (STD) CARBIDE 25 deg HELIX 118 deg SPLIT PT DRILL "NEW"

  • Largo, Florida, United States
  • Jun 4th
.3020" N HSCO JOBBER LENGTH DRILL 130 DEGREE HELICAL POINT

.3020" N HSCO JOBBER LENGTH DRILL 130 DEGREE HELICAL POINT

  • Petaluma, California, United States
  • Jun 7th
KAR Products 17 Drill Bits 15 Different From 5/64" too 1/2" High Quality Bits

KAR Products 17 Drill Bits 15 Different From 5/64" too 1/2" High Quality Bits

  • Lemoore, California, United States
  • Jun 7th
HUOT MASTER 4 FLUTE END MILLS DISPENSER ORGANIZER CABINET - 13325 "NEW"

HUOT MASTER 4 FLUTE END MILLS DISPENSER ORGANIZER CABINET - 13325 "NEW"

  • Eastlake, Ohio, United States
  • Jun 7th
Silver/Deming Drill Bit, Reduced 1/2"Shank, 27/32" Dia, HSS, 118 Deg

Silver/Deming Drill Bit, Reduced 1/2"Shank, 27/32" Dia, HSS, 118 Deg

  • United States, United States
  • Jun 9th
4 NEW PUTNAM COUNTER BORE PILOT DRILLS size range .343 - .4688 machinist tools E

4 NEW PUTNAM COUNTER BORE PILOT DRILLS size range .343 - .4688 machinist tools E

  • Thomaston, Connecticut, United States
  • Jun 9th
Precision Twist Drill High Speed Steel Jobbers Length NOS Straight Shank 35/64th

Precision Twist Drill High Speed Steel Jobbers Length NOS Straight Shank 35/64th

  • Yucaipa, California, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies