+ Post new Ad
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 0
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 1
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 2
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 3
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 4
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 5
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 6
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 7
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 0
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 1
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 2
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 3
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 4
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 5
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 6
Interstate 7" x 10" Tilting Table MSC # 00146027, US $199.00 – Picture 7

Interstate 7" X 10" Tilting Table Msc # 00146027

US $199.00

  • Reno, Nevada, United States
  • Feb 27th
Open on mobile:
QR code
Used in very good condition, 2 corners have slight wear as shown in last two pictures. Specs Angle & Tilting Tables; Type: Tilting Table; Table Width (Inch): 7; Table Length (Inch): 10; Swivels (Yes/No): No; Minimum Tilt Angle ( ): -45.00; Maximum Tilt Angle ( ): +45.00 Type Tilting Table Table Width (Inch) 7 Table Length (Inch) 10 Swivels (Yes/No) No Minimum Tilt Angle ( ) -45.00 Maximum Tilt Angle ( ) +45.00 Maximum Load Capacity (Lb.) 66.00 T-Slot Width (Inch) 1/2 Overall Width (Inch) 7 Overall Height (Inch) 5 
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Interstate

Directions

Similar products from Fittings & Plates

ALL TOOL ROTADEX 4C COMPOUND COLLET INDEXER *

ALL TOOL ROTADEX 4C COMPOUND COLLET INDEXER *

  • Edison, New Jersey, United States
  • Feb 28th
Hardinge CHNC 3/8" 8 Station Top Turret Plate

Hardinge CHNC 3/8" 8 Station Top Turret Plate

  • Oakdale, California, United States
  • Feb 28th
Precision Ground Semi Steel Right Angle 418-4240 6" x 6" x 8" Iron 4P NIB (B16)

Precision Ground Semi Steel Right Angle 418-4240 6" x 6" x 8" Iron 4P NIB (B16)

  • Springfield, Illinois, United States
  • Feb 28th
NICE! SIMCO MICRO-GRIND 5C COLLET INDEXING FIXTURE FOR MILLING GRINDING

NICE! SIMCO MICRO-GRIND 5C COLLET INDEXING FIXTURE FOR MILLING GRINDING

  • El Monte, California, United States
  • Feb 28th
YUASA 550-007 ACCU-DEX 8" HORIZONTAL VERTICAL ROTARY SUPER SPACER 3 JAW CHUCK

YUASA 550-007 ACCU-DEX 8" HORIZONTAL VERTICAL ROTARY SUPER SPACER 3 JAW CHUCK

  • Ellington, New York, United States
  • Feb 28th
HAAS 10" T SLOT ROTARY TABLE CNC SERVO INDEXING FIXTURE 4TH AXIS HZ VT

HAAS 10" T SLOT ROTARY TABLE CNC SERVO INDEXING FIXTURE 4TH AXIS HZ VT

  • Ellington, New York, United States
  • Feb 28th
ERICKSON CAT 40 BT 40 TOOLING PRESETTER W/ STARRETT MICROMETER 10" CAPACITY

ERICKSON CAT 40 BT 40 TOOLING PRESETTER W/ STARRETT MICROMETER 10" CAPACITY

  • Ellington, New York, United States
  • Feb 28th
HARDINGE MODEL H-4 5C COLLET INDEXING FIXTURE W/ HARDINGE 5/8" 5C COLLET

HARDINGE MODEL H-4 5C COLLET INDEXING FIXTURE W/ HARDINGE 5/8" 5C COLLET

  • Ellington, New York, United States
  • Feb 28th
SPEEDEX MODEL 360 5C COLLET INDEXING FIXTURE HZ VT W HARDINGE COLLET

SPEEDEX MODEL 360 5C COLLET INDEXING FIXTURE HZ VT W HARDINGE COLLET

  • Ellington, New York, United States
  • Feb 28th
BROWN & SHARPE 6" x 12" PRECISION SINE PLATE FIXTURE W/ TAPPED TABLE 925-00

BROWN & SHARPE 6" x 12" PRECISION SINE PLATE FIXTURE W/ TAPPED TABLE 925-00

  • Ellington, New York, United States
  • Feb 28th
5C COLLET INDEXING SPINNER COLLET BLOCKS & RIVETT COLLETS

5C COLLET INDEXING SPINNER COLLET BLOCKS & RIVETT COLLETS

  • Franklinville, New York, United States
  • Feb 27th
8" L-00 MOUNT CAST IRON DOG DRIVE FACE PLATE LATHE

8" L-00 MOUNT CAST IRON DOG DRIVE FACE PLATE LATHE

  • Highland, New York, United States
  • Feb 27th
SOUTHBEND LATHE 8" DOG DRIVE FACE PLATE 2-1/4" - 8 SFP-101FH

SOUTHBEND LATHE 8" DOG DRIVE FACE PLATE 2-1/4" - 8 SFP-101FH

  • Highland, New York, United States
  • Feb 27th
HARDINGE C-24-D THREADED STYLE CHUCK - FIXTURE MOUNT 5"

HARDINGE C-24-D THREADED STYLE CHUCK - FIXTURE MOUNT 5"

  • Highland, New York, United States
  • Feb 27th
LEVIN 3c, Index Plate Lot with Hub, Watchmaker's, Jeweler's Lathe

LEVIN 3c, Index Plate Lot with Hub, Watchmaker's, Jeweler's Lathe

  • La Habra, California, United States
  • Feb 27th
5C Index Fixture

5C Index Fixture

  • Naubinway, Michigan, United States
  • Feb 27th
DAVENPORT P/N # 5080-76 CLUTCH LEVER

DAVENPORT P/N # 5080-76 CLUTCH LEVER

  • Churchville, New York, United States
  • Feb 27th
59.5" x 14" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

59.5" x 14" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

  • Grand Rapids, Michigan, United States
  • Feb 27th
57.5" x 16.25" Steel Welding T-Slot Table Cast iron Layout Plate T-Slot Weld Jig

57.5" x 16.25" Steel Welding T-Slot Table Cast iron Layout Plate T-Slot Weld Jig

  • Grand Rapids, Michigan, United States
  • Feb 27th
Vacuum table chuck plate 4.75" x 4.74" porous brass

Vacuum table chuck plate 4.75" x 4.74" porous brass

  • Newtown Square, Pennsylvania, United States
  • Feb 27th

People who viewed this item also vieved

ER11 COLLET SET - 26 PIECES - INCH SIZES

ER11 COLLET SET - 26 PIECES - INCH SIZES

  • Fort Myers, Florida, United States
  • Jan 30th
ER16 COLLET SET - 23 PIECES - INCH SIZES

ER16 COLLET SET - 23 PIECES - INCH SIZES

  • Fort Myers, Florida, United States
  • Jan 30th
Hardinge 16C Collet 1-1/8" Round Serrated w/ Internal Threads # 17170059011250

Hardinge 16C Collet 1-1/8" Round Serrated w/ Internal Threads # 17170059011250

  • West Warwick, Rhode Island, United States
  • Jan 30th
Brown & Sharp number754-C machinst parallel clamps

Brown & Sharp number754-C machinst parallel clamps

  • Edgewater, Maryland, United States
  • Feb 13th
Double 304 Clamps

Double 304 Clamps

  • Airway Heights, Washington, United States
  • Feb 13th
USED DOWIDAT 1/2"dr. T-HANDLE TOOL

USED DOWIDAT 1/2"dr. T-HANDLE TOOL

  • Manchester, Pennsylvania, United States
  • Feb 13th
BRAND NEW KURT VISE WORK STOP , VISE STOP FOR KURT VISE JAWS

BRAND NEW KURT VISE WORK STOP , VISE STOP FOR KURT VISE JAWS

  • Port Richey, Florida, United States
  • Feb 13th
Toolex 6'' dual station machine vise

Toolex 6'' dual station machine vise

  • Thaxton, Virginia, United States
  • Feb 13th
MACHINIST TOOL LATHE MILL Starrett # 160 Pr of Clamps MICRO Vises

MACHINIST TOOL LATHE MILL Starrett # 160 Pr of Clamps MICRO Vises

  • Easton, Connecticut, United States
  • Feb 13th
Precision Light-Duty Live Center MT3 brand new lathe

Precision Light-Duty Live Center MT3 brand new lathe

  • United States
  • Feb 14th
IDEAL MT3 Live Center Metal Lathe Machinist Tool Box Find Southbend Clausing Jet

IDEAL MT3 Live Center Metal Lathe Machinist Tool Box Find Southbend Clausing Jet

  • Yorktown, Virginia, United States
  • Feb 14th
taft-peirce 80" bench center

taft-peirce 80" bench center

  • Quincy, Illinois, United States
  • Feb 14th
GOOD USED 1/2" SQ ENGINE LATHE CHUCK KEY 10" T Handle ATLAS BUCK CRAFTSMAN UNION

GOOD USED 1/2" SQ ENGINE LATHE CHUCK KEY 10" T Handle ATLAS BUCK CRAFTSMAN UNION

  • Rushville, Indiana, United States
  • Feb 14th
Baileigh Rotary Draw Tube & Pipe Bender NEW RDB-100

Baileigh Rotary Draw Tube & Pipe Bender NEW RDB-100

  • Columbus, Ohio, United States
  • Feb 14th
Abbot Aluminum soft pie jaw Lathe Chuck

Abbot Aluminum soft pie jaw Lathe Chuck

  • Tulsa, Oklahoma, United States
  • Feb 14th
Lot of (3) Used Steel Morse Taper Adapters from MT #2 Shank To MT #1 Socket

Lot of (3) Used Steel Morse Taper Adapters from MT #2 Shank To MT #1 Socket

  • Bristol, Connecticut, United States
  • Feb 25th
Used Morse Taper Steel Adapter From MT 4 to MT 3, Length 5.20 In

Used Morse Taper Steel Adapter From MT 4 to MT 3, Length 5.20 In

  • Bristol, Connecticut, United States
  • Feb 25th
LARGE STEADY REST 25-1/2" OPENING ~ 40-9/16" OVERALL HEIGHT

LARGE STEADY REST 25-1/2" OPENING ~ 40-9/16" OVERALL HEIGHT

  • Roanoke, Virginia, United States
  • Feb 25th
VINTAGE LUFKIN # 905 SET OF V BLOCKS & CLAMPS IN ORIGINAL BOX

VINTAGE LUFKIN # 905 SET OF V BLOCKS & CLAMPS IN ORIGINAL BOX

  • Indianapolis, Indiana, United States
  • May 9th
Toolmakers Medley (die lights, scales, set up blocks an more)- show original title

Toolmakers Medley (die lights, scales, set up blocks an more)- show original title

  • Bronson, Florida, United States
  • May 10th
Starrett No. 271 Vee Block

Starrett No. 271 Vee Block

  • Garden City, Idaho, United States
  • May 11th
BRIDGEPORT 15" ROTARY TABLE (LOCAL PICK UP ONLY)

BRIDGEPORT 15" ROTARY TABLE (LOCAL PICK UP ONLY)

  • Livonia, Michigan, United States
  • Jun 1st
Troyke DMT-15 Rotary Cross Slide Table 12" x 12" T-slotted Tabletop

Troyke DMT-15 Rotary Cross Slide Table 12" x 12" T-slotted Tabletop

  • Flint, Michigan, United States
  • Jun 2nd
MASKING PLATES Dividing Head Rotary Table Index

MASKING PLATES Dividing Head Rotary Table Index

  • Westford, Massachusetts, United States
  • Jun 2nd
NEW, 3.Pc. EMCO F1 PC50,PC55 CNC MILL MACHINE ISO30 TOOL HOLDER PULL STUD

NEW, 3.Pc. EMCO F1 PC50,PC55 CNC MILL MACHINE ISO30 TOOL HOLDER PULL STUD

  • Warren, Michigan, United States
  • May 24th
NEW, 10 PC. EMCO F1 PC50,PC55 CNC MILL MACHINE ISO30 TOOL HOLDER PULL STUD

NEW, 10 PC. EMCO F1 PC50,PC55 CNC MILL MACHINE ISO30 TOOL HOLDER PULL STUD

  • Warren, Michigan, United States
  • May 24th
E Type ER-25, ER Tool Holder Collet Chuck Spanner Wrench, NEW

E Type ER-25, ER Tool Holder Collet Chuck Spanner Wrench, NEW

  • Warren, Michigan, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies