+ Post new Ad
Iron Smooth & Threaded Rods & Nuts kit - Prusa i3 SINGLE Frame Reprap 3D printer, US $45.99 – Picture 0
Iron Smooth & Threaded Rods & Nuts kit - Prusa i3 SINGLE Frame Reprap 3D printer, US $45.99 – Picture 0

Iron Smooth & Threaded Rods & Nuts Kit - Prusa I3 Single Frame Reprap 3d Printer

US $45.99

  • Liptovsky Mikulas, EU, Slovakia
  • Jan 30th
Open on mobile:
QR code
Smooth & Threaded rods and Nuts for Prusa i3 SINGLE Sheet Frame:                               Link: reprap.org/wiki/Prusa_i3_Build_Manual#Materials **************************************************************************** Smooth rods are from precise steel and coated with silicone oil. Threaded rods are zinc coated and the ends are proceed with tap. On all rods are the ends rounded for more easily manipulation. Nylock nuts for all corners! 1. Class WorldWide Shipping with tracking info! Extra fast delivery for EU buyers up to one week! (For countries outside EU delay could be caused by customs clearance in your country more than 30days !) Part list: Smooth rods: ?8mm   2x 370mm (X left right)        2x 350mm (Y front back)        2x 320mm (Z    up down) Threaded rods: M10    2x 380mm (frame by Y) M8     4x 205mm (frame by X) M5     2x 300mm (move     Z) Nuts: M10    8x classic + 4x nylock M8    14x classic + 8x nylock M5     2x classic (for Z move) Washers: M10   12x M8    22x           
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model Prusa i3
Country/Region of Manufacture Slovakia

Directions

Similar products from Other Plastic Processing Tools

Novatec 15000 lb Capacity Hopper #55163

Novatec 15000 lb Capacity Hopper #55163

  • Holly, Michigan, United States
  • Jan 30th
Fast Heat 1200W, 240V -- CH26734 NX -- Used

Fast Heat 1200W, 240V -- CH26734 NX -- Used

  • San Jose, California, United States
  • Jan 30th
10pcs Reprap 12V 40W Ceramic Cartridge Heater for 3D Printer Prusa Mendel New

10pcs Reprap 12V 40W Ceramic Cartridge Heater for 3D Printer Prusa Mendel New

  • Hongkong, Hong Kong
  • Jan 30th
2.5" NRM Plastic Extruder - Being rebuilt now will have warranty

2.5" NRM Plastic Extruder - Being rebuilt now will have warranty

  • Palm Beach Gardens, Florida, United States
  • Jan 30th
Plastic Extrusion Scrap Grinder Granutec 7.5 HP

Plastic Extrusion Scrap Grinder Granutec 7.5 HP

  • Palm Beach Gardens, Florida, United States
  • Jan 30th
NEW VULCAN TB-3820A THUNDERBOLT CARTRIDGE HEATER 120V-AC 1-1/2 IN 150W D433816

NEW VULCAN TB-3820A THUNDERBOLT CARTRIDGE HEATER 120V-AC 1-1/2 IN 150W D433816

  • Delta, Ohio, United States
  • Jan 30th
BENCHMARK D2DEX CARTRIDGE HEATER 100V-AC 2-9/16IN 115W D433802

BENCHMARK D2DEX CARTRIDGE HEATER 100V-AC 2-9/16IN 115W D433802

  • Delta, Ohio, United States
  • Jan 30th
Carbon Fiber Rod Set for the Rostock 3D printer, with Tie rod ends

Carbon Fiber Rod Set for the Rostock 3D printer, with Tie rod ends

  • Milford, New Hampshire, United States
  • Jan 30th
NRM 3.5" Extrusion Screw - 32:1 Extruder Screw

NRM 3.5" Extrusion Screw - 32:1 Extruder Screw

  • Palm Beach Gardens, Florida, United States
  • Jan 30th
NRM 3.5" Extrusion Barrel - 24:1 Extruder Barrel

NRM 3.5" Extrusion Barrel - 24:1 Extruder Barrel

  • Palm Beach Gardens, Florida, United States
  • Jan 30th
Whitlock Pneumatic Gaylord Tipper W Regulator

Whitlock Pneumatic Gaylord Tipper W Regulator

  • Watertown, Connecticut, United States
  • Jan 30th
Ims Floor Tipster 1Ph 120 Volt Gaylord Tipper

Ims Floor Tipster 1Ph 120 Volt Gaylord Tipper

  • Watertown, Connecticut, United States
  • Jan 30th
1PCS 3D Printer 0.2mm Extruder Nozzle Print Head for MK8 Makerbot RepRap

1PCS 3D Printer 0.2mm Extruder Nozzle Print Head for MK8 Makerbot RepRap

  • ???, ???????, China
  • Jan 30th
BENCHMARK C1DA12 CARTRIDGE HEATER 120V-AC 1-5/8 IN 100W D434953

BENCHMARK C1DA12 CARTRIDGE HEATER 120V-AC 1-5/8 IN 100W D434953

  • Delta, Ohio, United States
  • Jan 30th
BENCHMARK C1DB12 CARTRIDGE HEATER 120V-AC 1-5/8 IN 100W D434956

BENCHMARK C1DB12 CARTRIDGE HEATER 120V-AC 1-5/8 IN 100W D434956

  • Delta, Ohio, United States
  • Jan 30th
2 mil PET film 4 pc. for 3D Printers 12" X 12" for 300mm x 300mm glass or less

2 mil PET film 4 pc. for 3D Printers 12" X 12" for 300mm x 300mm glass or less

  • Carlsbad, California, United States
  • Jan 30th
NEW BENCHMARK C1DA12 CARTRIDGE HEATER 120V-AC 1-5/8 IN 100W D433778

NEW BENCHMARK C1DA12 CARTRIDGE HEATER 120V-AC 1-5/8 IN 100W D433778

  • Delta, Ohio, United States
  • Jan 30th
NORWOOD 43009-3 PG01G096U HEATER CARTRIDGE 1-3/8 X 3/8 IN 120V-AC 150W D430709

NORWOOD 43009-3 PG01G096U HEATER CARTRIDGE 1-3/8 X 3/8 IN 120V-AC 150W D430709

  • Delta, Ohio, United States
  • Jan 30th
NEW NO-1441 HEATER CARTRIDGE 3 IN LONG 3/8 IN OD 240V-AC 200W D435764

NEW NO-1441 HEATER CARTRIDGE 3 IN LONG 3/8 IN OD 240V-AC 200W D435764

  • Delta, Ohio, United States
  • Jan 30th
TEMPCO CBH10525 LIQUID COOLED CAST-IN BAND HEATER EXTRUSION PROCESSING 0802.2404

TEMPCO CBH10525 LIQUID COOLED CAST-IN BAND HEATER EXTRUSION PROCESSING 0802.2404

  • Chandler, Arizona, United States
  • Jan 30th

People who viewed this item also vieved

INJECTION MOLDING SCREW 385 Ton JSW B Barrel Screw Rebuilt, 63"

INJECTION MOLDING SCREW 385 Ton JSW B Barrel Screw Rebuilt, 63"

  • Junction City, Kentucky, United States
  • Jun 6th
1997 60 Ton 3.2 oz Engel ES200/60TL-3 Injection Molding Machine-IMM # 7761813

1997 60 Ton 3.2 oz Engel ES200/60TL-3 Injection Molding Machine-IMM # 7761813

  • Holly, Michigan, United States
  • Jun 6th
2001 Conair Sepro Robot All-Servo Robots, Model PIP3031

2001 Conair Sepro Robot All-Servo Robots, Model PIP3031

  • MI, United States
  • Jun 6th
2000 720 Ton All-Electric UBE Niigata Injection Molding Machine, Model UN720/114

2000 720 Ton All-Electric UBE Niigata Injection Molding Machine, Model UN720/114

  • Indiana, United States
  • Jun 6th
2000 UBE 500 Ton Injection Molding Machine, Model PZIII-500

2000 UBE 500 Ton Injection Molding Machine, Model PZIII-500

  • Indiana, United States
  • Jun 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies