+ Post new Ad
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 0
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 1
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 2
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 3
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 4
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 5
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 0
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 1
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 2
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 3
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 4
Jacobs collet chuck Model 50 with Set Of 10 Collets In Case, US $280 – Picture 5

Jacobs Collet Chuck Model 50 With Set Of 10 Collets In Case

US $280

  • Alpena, Michigan, United States
  • Mar 6th
Open on mobile:
QR code
Jaobs Chuck Model 50 with spindle adapter that fits lathes with 2 1/4 - 8 spindle.  Can be adapted to other spindles with proper adapter plate.  Comes with the pictured 10 collets for Model 50 chuck. Fits logan and other lathes  Shipped to the lower 48 states. This is a like new Singer.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Model Model 50 with 50-82 Adapter 2 1/4-8
Manufacturer Jacobs
Brand Jacobs

Directions

Similar products from Collet Chucks & Sets

Precision 5C spin index

Precision 5C spin index

  • Lawrenceville, Georgia, United States
  • Mar 8th
ATS-A6-S30TL COLLET CHUCK

ATS-A6-S30TL COLLET CHUCK

  • Fremont, California, United States
  • Mar 8th
TECHNIKS ER32 1" Straight shank collet chuck extension toolholder CNC mill NICE!

TECHNIKS ER32 1" Straight shank collet chuck extension toolholder CNC mill NICE!

  • Youngstown, Ohio, United States
  • Mar 8th
MicroCentric CB42-ND Dead Length Design Quick Change Collet Chuck

MicroCentric CB42-ND Dead Length Design Quick Change Collet Chuck

  • Dayton, Ohio, United States
  • Mar 7th
ER 25 Collet Chuck Extension W/ 1" Shank & 4-1/4" OAL

ER 25 Collet Chuck Extension W/ 1" Shank & 4-1/4" OAL

  • Chino, California, United States
  • Mar 7th
CAT40 ER20 Collet Chuck

CAT40 ER20 Collet Chuck

  • Beloit, Wisconsin, United States
  • Mar 7th
Young Bros Steel Stamp Set, 1/2, Figures 0 - 9, MADE IN USA | (8C) FRA

Young Bros Steel Stamp Set, 1/2, Figures 0 - 9, MADE IN USA | (8C) FRA

  • Saint Louis, Missouri, United States
  • Mar 6th
TECNARA TG100 COLLET CHUCK w/ CAT40 SHANK + 3 COLLETS

TECNARA TG100 COLLET CHUCK w/ CAT40 SHANK + 3 COLLETS

  • Covina, California, United States
  • Mar 6th
Erickson 1015601 Collet Chuck Double Angle Collet Series: DA100

Erickson 1015601 Collet Chuck Double Angle Collet Series: DA100

  • Saint Peters, Missouri, United States
  • Mar 6th
5C Collet Block Chuck Set for 5 C collets

5C Collet Block Chuck Set for 5 C collets

  • Moneta, Virginia, United States
  • Mar 6th
Hardinge Sjogren 5c speed chuck

Hardinge Sjogren 5c speed chuck

  • Madison, Ohio, United States
  • Mar 6th
MACHINIST 55-80 SPANNER PIN HOOK STYLE WRENCH WITH EXTRA TOOL.

MACHINIST 55-80 SPANNER PIN HOOK STYLE WRENCH WITH EXTRA TOOL.

  • Oakdale, Pennsylvania, United States
  • Mar 5th
HARDINGE #4-H 5C USED INDEX HEAD, GOOD CONDITION WITH 30 INDEX PLATE SEE PICS

HARDINGE #4-H 5C USED INDEX HEAD, GOOD CONDITION WITH 30 INDEX PLATE SEE PICS

  • Bristol, Connecticut, United States
  • Mar 5th
LOT OF 3 HARDINGE #4-H 5C USED INDEX PLATES, GOOD CONDITION PLATE SEE PICS

LOT OF 3 HARDINGE #4-H 5C USED INDEX PLATES, GOOD CONDITION PLATE SEE PICS

  • Bristol, Connecticut, United States
  • Mar 5th
2 UNIVERSAL ENGINEERING ACURA-FLEX 3/4" COLLET CHUCKS w/ CAT40 SHANKS - #912715

2 UNIVERSAL ENGINEERING ACURA-FLEX 3/4" COLLET CHUCKS w/ CAT40 SHANKS - #912715

  • Covina, California, United States
  • Mar 5th
5c Collet Block Chucks Set

5c Collet Block Chucks Set

  • Arlington Heights, Illinois, United States
  • Mar 5th
R8 DA180 Collet Chuck Set KENNA METAL

R8 DA180 Collet Chuck Set KENNA METAL

  • Arlington Heights, Illinois, United States
  • Mar 5th
Used BT30 ER32 COLLET CHUCK ER32x60 (C) (WR.8.B.B.4)

Used BT30 ER32 COLLET CHUCK ER32x60 (C) (WR.8.B.B.4)

  • Perth, Ontario, Canada
  • Mar 4th
Sears & Roebuck Stamp Works 3/16 inch Steel Set 36 Combo Figure & Letter

Sears & Roebuck Stamp Works 3/16 inch Steel Set 36 Combo Figure & Letter

  • Englishtown, New Jersey, United States
  • Mar 4th
Used Hardinge 2" 5C Step Chuck

Used Hardinge 2" 5C Step Chuck

  • North Easton, Massachusetts, United States
  • Mar 4th

People who viewed this item also vieved

HARDINGE 1-11/32" DIAMETER 2J COLLET MORE COLLETS & TOOLING LISTED LOT C11952

HARDINGE 1-11/32" DIAMETER 2J COLLET MORE COLLETS & TOOLING LISTED LOT C11952

  • Dayton, Ohio, United States
  • Mar 4th
HARDINGE 1-1/16" DIAMETER 2J COLLET MORE COLLETS & TOOLING LISTED LOT C11951

HARDINGE 1-1/16" DIAMETER 2J COLLET MORE COLLETS & TOOLING LISTED LOT C11951

  • Dayton, Ohio, United States
  • Mar 4th
SUPER PRECISION ER40 1/2" COLLET for CNC Milling Lathe Tool and Spindle Motor

SUPER PRECISION ER40 1/2" COLLET for CNC Milling Lathe Tool and Spindle Motor

  • Shanghai Door to Door Service, China
  • Mar 5th
Precision Setup Blocks; 7"x7"x5 Made in USA (CTAM# 7205)

Precision Setup Blocks; 7"x7"x5 Made in USA (CTAM# 7205)

  • Sicklerville, New Jersey, United States
  • Mar 5th
5C Horizontal & Vertical Collet Fixture Drill Milling Lathe Grinding Height 4"

5C Horizontal & Vertical Collet Fixture Drill Milling Lathe Grinding Height 4"

  • Desert Hot Springs, California, United States
  • Mar 5th
D60 CNC Mill Vise jaw 0304001

D60 CNC Mill Vise jaw 0304001

  • Marietta, Georgia, United States
  • Mar 5th
WESTWARD Spring Clamps (qty: 4), 1", No-Slip, High Tech Resin, 3KB95A

WESTWARD Spring Clamps (qty: 4), 1", No-Slip, High Tech Resin, 3KB95A

  • Grand Rapids, Michigan, United States
  • Mar 9th
Starrett 161c ,Machinest, ToolMakers Clamp

Starrett 161c ,Machinest, ToolMakers Clamp

  • Sterling Heights, Michigan, United States
  • Mar 9th
destaco 267 clamp no hardware

destaco 267 clamp no hardware

  • Colona, Illinois, United States
  • Mar 9th
6" Bison 3-Jaw Scroll Chuck

6" Bison 3-Jaw Scroll Chuck

  • Natick, Massachusetts, United States
  • Mar 10th
SET OF THREE ABBOTT 15MDA ALUMINUM CHUCK JAWS

SET OF THREE ABBOTT 15MDA ALUMINUM CHUCK JAWS

  • Franklin Park, Illinois, United States
  • Mar 10th
SCHUNK SOFT JAW SSJ-200

SCHUNK SOFT JAW SSJ-200

  • Buffalo, New York, United States
  • Mar 10th
atlas milling machine 7b Shaper part gear rod

atlas milling machine 7b Shaper part gear rod

  • Royal Oak, Michigan, United States
  • Mar 10th
Palmgren Mill Vise Heavy duty machinist toolmakers tools id. 24

Palmgren Mill Vise Heavy duty machinist toolmakers tools id. 24

  • Reynoldsburg, Ohio, United States
  • Mar 10th
Reed Mfg Vise 104 R Bench mount Erie USA made 4" Jaw 8" opening

Reed Mfg Vise 104 R Bench mount Erie USA made 4" Jaw 8" opening

  • Zephyrhills, Florida, United States
  • Mar 10th
Bench Center; 5" x 12" (CTAM #7476)

Bench Center; 5" x 12" (CTAM #7476)

  • Sicklerville, New Jersey, United States
  • May 7th
USED RITEN USA THREADED END #14 JARNO LATHE DEAD CENTER (1.150"-Point Diameter)

USED RITEN USA THREADED END #14 JARNO LATHE DEAD CENTER (1.150"-Point Diameter)

  • Fairfield, Iowa, United States
  • May 7th
New MT3 Lathe Dead Center Morse Taper #3 Lathe Center

New MT3 Lathe Dead Center Morse Taper #3 Lathe Center

  • ??, China
  • May 8th
Work support pins 2pcs. Pin = 1" x 1.7" Bolt= 1/2-14 thread 7/16 long.

Work support pins 2pcs. Pin = 1" x 1.7" Bolt= 1/2-14 thread 7/16 long.

  • Ferndale, Michigan, United States
  • May 26th
Mill Stop Swiss Precision Instruments Aluminum Work Stop, No. 98-040-9

Mill Stop Swiss Precision Instruments Aluminum Work Stop, No. 98-040-9

  • Millsboro, Delaware, United States
  • May 26th
New Noble Kawatatec Machining center pallets 800-A PL-5 Kitamura Mycenter HX800

New Noble Kawatatec Machining center pallets 800-A PL-5 Kitamura Mycenter HX800

  • Mulberry, Arkansas, United States
  • May 26th
Vee-Block [Machine Shop]

Vee-Block [Machine Shop]

  • Livonia, Michigan, United States
  • May 31st
MACHINIST TOOLS LATHE MILL Machinist Lot of Toolmakers Tool Makers Block s

MACHINIST TOOLS LATHE MILL Machinist Lot of Toolmakers Tool Makers Block s

  • Morris Plains, New Jersey, United States
  • May 31st
MACHINIST TOOLS LATHE MILL Machinist Lot of V Blocks for Holding Set Up

MACHINIST TOOLS LATHE MILL Machinist Lot of V Blocks for Holding Set Up

  • Morris Plains, New Jersey, United States
  • May 31st
Denison Multipress p/n 030-10656 Gear, clockwise, for A46 Index Table

Denison Multipress p/n 030-10656 Gear, clockwise, for A46 Index Table

  • Saint Louis, Missouri, United States
  • May 31st
Haas T5C4 CNC 4th 5th Axis Rotary Table Indexer 5C Collet

Haas T5C4 CNC 4th 5th Axis Rotary Table Indexer 5C Collet

  • Erie, Pennsylvania, United States
  • May 31st
10 Inch Yuasa Rotary Table # 550-110, Free Ship. Machine Shop Tool

10 Inch Yuasa Rotary Table # 550-110, Free Ship. Machine Shop Tool

  • Akron, Ohio, United States
  • May 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies