JDSU HST-3000 BDCM-WB2-2 xDSL Broadcom ADSL2+ VDSL2 Bonded Copper Module HST SIM, US $1,795.00 – Picture 0

JDSU HST-3000 BDCM-WB2-2 xDSL Broadcom ADSL2+ VDSL2 Bonded Copper Module HST SIM, US $1,795.00 – Picture 1

JDSU HST-3000 BDCM-WB2-2 xDSL Broadcom ADSL2+ VDSL2 Bonded Copper Module HST SIM, US $1,795.00 – Picture 2

JDSU HST-3000 BDCM-WB2-2 xDSL Broadcom ADSL2+ VDSL2 Bonded Copper Module HST SIM, US $1,795.00 – Picture 3

Jdsu Hst-3000 Bdcm-wb2-2 Xdsl Broadcom Adsl2+ Vdsl2 Bonded Copper Module Hst Sim

US $1,795.00

Toledo, Ohio, United States
Feb 16th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: JDSU HST-3000 SIM BDCM-WB2-2 Broadcom Bonded xDSL Module (BC# 19678) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! JDSU HST-3000 SIM BDCM-WB2-2 Broadcom Bonded xDSL Module. ADSL1, ADSL2, ADSL2+, VDSL2, Bonded ADSL, Bonded VDSL And Copper (up to 30 MHz) Testing. For Use With HST-3000 & HST-3000C Mainframes w/ Firmware Revision 7.61.01 or Higher (HST-3000 & HST-3000C Mainframes Not Included In Sale!) The new SIM BDCM-WB-2 has the improvement in that the 2mm copper interface connectors at the top of the SIM can be used for both copper testing and xDSL testing & the addition of vectoring Working Condition: Excellent Condition: Refurbished Warranty: 90 Day Exchange Warranty The new SIM HST3000-BDCM-WB2-2 for modem plus wideband copper testing. Broadcom Chipset Bonded SIM With 2mm XDSL Support The new SIM has the improvement in that the 2mm copper interface connectors at the top of the SIM can be used for both copper testing and xDSL testing. With the new SIM, the user has the configuration choice of xDSL testing on either the 8-pin RJ-45 connector on the side of the SIM, or the 2mm Copper connectors on the top of the SIM. For the highest degree of accuracy in high bit rate or sensitive environments, JDSU recommends using the RJ-45 interface to RJ-45 interface cable, as the clip leads may introduce variability. HST3000-BDCM-WB2 ADSL/VDSL Bonded and Copper (up to 30 MHz) with Broadcom Chipset Saves money an reduces repeat faults with triple-play services testing capability in one Universal xDSL module that covers ADSL1, ADSL2, ADSL2+, VDSL2, Bonded ADSL, and Bonded VDSL Provides critical ability to verify correct pair-bonding and provisioning Provides investment protection in both CPE and DSLAM equipment, featuring the lates Broadcom chipset and compatible with the widest range of chipset manufacturers (Broadcom, Infineon, Ikanos/Conexant, and Texas Instruments) Reduces troubleshooting time enabling users to segment single line performance issues of a bonded group and segment which pair requires further troubleshooting Provides Hlog, and QLN graphing, which are key for identifying bridged tap, noise, and pair balance problems Service providers face significant challenges when ramping up their networks to provide advanced triple-play services with the same or better quality than cable/ multiple switch operators (MSOs). A key success factor will be to cost-effectively increase bandwidth to subscribers for new IP video services over bonded asymmetric Digital Subscriber Line 2+/very high-speed Digital Subscriber Line 2 (ADSL2+/ VDSL2) while continuing to provide single line ADSL2+ service to subscribers without triple-play services capability. It is tempting to believe that the bonded two pair ADSL2+/VDSL2 connection can be tested similarly to single line ADSL connection, however, testing one pair at a time is insufficient. Internet Protocol television (IPTV) services require pristine xDSL service Layer 1 performance. Factors such as noise, crosstalk, pair imbalance, bridged taps, and other copper plant anomalies can be easily hidden when testing one pair at a time. Dual-pair bonded group testing is critical to ensuring that the service will be delivered to the subscriber with the best possible quality of service (QoS). Designed for the outside plant, the HST-3000 meets those challenges head-on. Featuring the latest Broadcom Corporation chipset, the new service interface module (SIM) tests bonded-pair ADSL2+/VDSL2 by terminating both pairs of a bonded group. The Broadcom SIM also supports legacy ADSL1, ADSL2, ADSL2+, and VDSL2 in the same module, making it easy for technicians to switch between testing bonded and non-bonded services without having to swap modules. Further, the same module features dual tip/ring/ground interfaces for basic and advanced copper testing to further isolate copper pair problems. The new SIM provides additional testing power for field technicians who install and maintain access networks and high-bit-rate triple-play services, including IP Video. The lightweight, rugged, and battery-operated HST-3000 with the Broadcom SIM cost-effectively scales to provide an all-in-one solution for field installation, maintenance, and troubleshooting across a wide range of triple-play service test applications. Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Put your auctions on autopilot with Kyozou eBay Auction Tools

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Brand	JDSU
Model	BDCM-WB2-2