John Deere 4020, 3020 Rockshaft "t" Fitting To Add Extra Hydraulic Accessories

US $37.49

Neoga, Illinois, United States
Aug 26th

Open on mobile:
QR code

"This modification is "NOT" applicable to Late model 1969 and newer with hydraulic controls mounted on the right side of seat." Up for sale is one New Hydraulic "T" Fitting and Flared Cap to be installed at the Rockshaft main oil supply line. If you are needing an auxiliary hydraulic high pressure source to supply pressure to accessories such as a front end loader but are limited and or only have one set of hydraulics on your tractor, this "T" fitting will work. By installing this "T" fitting you will have "Constant" hydraulic high pressure at all times the engine is running. This hydraulic supply is independent of any controls. This frees up the use of the tractors existing hydraulics for other implements and still be able to operate a loader as needed. Of course, what ever implement / loader you use will need it's own independent control valve. You will also need to install a fluid return such as at the rockshaft return line on the left (Driver's side) or tap into the transmission filter cover or purchase a special cover that Deere will gouge your wallet for. I've even heard of tapping into the transmission fill pipe spout for the return line (maybe isn't the best place). In another Ebay auction listing, I have the recommended / suggested hydraulic return fitting and cap. The installation location for this "T" is on the right side (Passenger side) in front of the brake pedals. (See arrow in picture above for location.) On Tractors without a (3 point hitch) "Rockshaft", this same fitting must be installed at the inlet pressure line on top of the Selective Control Valve (SCV) in front of the dash under the hood. There is no restriction 3/8" inside diameter straight through. Also included is a Female Flare Cap to be used to "cap-off" the end of the "T" if you remove the implement and still want to operate the tractor without having to reinstall the original elbow previously removed. Or, keep the cap available in the tool box in the event that a main Hydraulic hose blows and you will be able to cap off the "T" allowing you to get the tractor to a location it could be repaired properly. This will fit more than just the 4020s and 3020s. If you need this for a 4010 / 3010 please let me know, because the "10" Series has a different size. What you will receive is: (1) Steel Hydraulic "Tee" (1) Female Flare Cap In another Ebay auction listing, I have the recommended / suggested hydraulic return fitting and cap.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Non-Domestic Product	No
Custom Bundle	No
Modified Item	No