Kala Mistral Heat Assisted Lamination System 1650

US $7,999.99

United States
Jan 30th

Open on mobile:
QR code

Description KALA Mistral Heat Assisted Lamination System 1650 DEMO KALA Mistral Heat Assisted Lamination System The new generation of Mistral laminators offers unbeaten performances at this price level. The new KALA Mistral laminating systems offers single side lamination with or without waste paper and simultaneously performs single side lamination and adhesive mounting. Encapsulation occurs in one run. You can mount onto boards up to 50 mm (2 in) thickness. With new even lighter self-blocking roll shafts, you will save time while changing film. No tools are required unlike systems using locking rings or pivoting shafts needing a large space behind the machine. Our roll-shafts can be used in any position of the machine and in both directions. 5 roll-shafts and one unwinding shaft are delivered with your new machine. The machine takes a small floor-space leaving free access enabling an effortless media change. All adjustments are easy to reach. All film tension adjustment are maintained when changing the film reel. The 50mm (2 in) opening of the rollers offers a wider range of uses, even if you don’t have a flat bed printing system in your workshop today. The pressure adjustment system monitored electronically ensures a uniform spread of the pressure on the roller contact zone. "Roll to Roll Operation:" An unwinding shaft can be used for feeding your prints in series. Prints can be wound onto a carton core (? 57 or 76mm – 2 or 3’’) or not, this shaft can be positioned on one of the storage position or on a free position on the machine to preserve your prints from dust before lamination. Once laminated, the prints can be wound onto the roll-take-up shaft a few centimetre after their process and be taken safely to their next finishing stage. Safety Features: The operator works in complete safety with 4 levels of protection: Visible laser eye in front of the roller, stopping the motor when cut. Automatic safety when the feeding tray is in upper position that cuts the driving motor circuit. 2 emergency switches easily reachable in the front and back of the machine. If one of these safety mechanisms is activated, a reset button on the panel board indicates by flashing in red, requesting to correct the fault and reactivate the system. The machine also uses a sound system to indicate the machine is about to go into reverse mode. Specifications Terms and Conditions Return Policy You have 30 days from the time you receive a product to initiate a return or to report a defective product. The preferred method to initiate a return is to contact us via the eBay messaging system. All returns must be authorized by a SignSupplyCloseout representative before the product is shipped back. The SignSupplyCloseout representative will issue a Return Merchandise Authorization (RMA) number that must be put on the outside of returned item's box. If the RMA number is not on the box there may be a delay in the refund/exchange process. See the items below to determine the terms for your return. Any order placed with SignSupplyCloseout implies consent to abide by these policies. Warranty Products with a warranty will have the warranty period listed in the item description. Any item without a warranty listed on the product page on does not have one. If you are having problems with a product contact SignSupplyCloseout Support via the eBay messaging system or by phone at 1- 425-902-1306. After the conclusion of your call, we will send you an eBay message that details the specifics and resolution of your call. We ask that you respond to this message to confirm its contents for eBay Buyer Protection purposes. SignSupplyCloseout reserves the right to send replacement parts for any equipment being covered under warranty, instead of replacing the machine outright. SignSupplyCloseout will ship these parts via FedEx ground shipping with no cost to the customer. Full support will be given by SignSupplyCloseout representatives in the replacement of any parts sent. If SignSupplyCloseout determines that the equipment is not able to be repaired, then an RMA number will be assigned and the customer authorized to return the equipment for replacement. Any equipment older than 30 days may be replaced with a certified refurbished unit at our discretion. Defective Items If an item arrives in an unusable condition, SignSupplyCloseout must be notified within 30 days of receiving the product or a return may not be allowed. SignSupplyCloseout reserves the right to request proof in the form of pictures to prove defects as well as the right to send replacement parts for items under warranty. Return Shipping Labels and Restocking Fees Shipping Labels: Any item being returned to SignSupplyCloseout will be shipped by the buyer and the buyer's expense. The buyer may choose their own shipping method as long as tracking information is communicated to SignSupplyCloseout. Items determined by a SignSupplyCloseout support representative to be defective or improperly shipped will receive a return shipping label free of charge. Restocking Fees: Any item returned that is not in its original condition or packaging, is damaged, is missing parts, is for a reason not due to SignSupplyCloseout error, or defect will be assessed a restocking fee equal to 20A°/o of the item's price. Return Exceptions Consumable Material: Vinyl, transfer tape, and other supplies are not eligible for return once the packaging is opened. Software: Software is not eligible for return under any circumstances. If the disc is determined to be defective a digital download for the item may be supplied at the discretion of SignSupplyCloseout. Shipping Most orders ship FedEx Ground. Small packages may ship using USPS. We usually ship orders within 24 hours of payment clearance. And tracking numbers are sent to buyers accordingly. Oversize equipment will ship via freight. Local Pickups Local pickups are not available. No exceptions. State Sales Tax Due to state regulations and laws, sales tax will be charged to packages being sent to addresses in California (7.5%), Colorado (4.0%), Tennessee (9.25%), and Washington State (9.5%). International Customers International buyers: please note that except for Canada, we do not accept PayPal payments. We offer those outside of the US and Canada the ability to make a direct wire-transfer payment. Please contact us before placing an order to get a proper shipping quote as the eBay shipping estimator is not commensurate with our shipping rates. Please remember that international shipping is difficult and many issues can lead to delays. Please expect extra time with clearing payment and possible delays due to customs clearance. We do sell products internationally and do our best to minimize problems but it is impossible to eliminate all potential issues and delays. SignSupplyCloseout assumes no responsibility for customs, duties, and taxes a shipment may incur during transit. The buyer is obligated to pay these fees. Alaska, Hawaii, APO/FPO, and US Territories Shipping to AK, HI, APO/FPO, and the US Territories will be higher than the standard rates extended to the lower 48 states. In most cases, the shipping price will read, "Other (see description)". Please be certain to select this method when checking out or your shipment will be delayed until we receive full payment. We use the most economical shipping method for AK, HI, APO/FPO, and US Territory orders which may be USPS, FedEx, or UPS.

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Brand	Kala
Model	Mistral 1650