+ Post new Ad
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits ? 0.8mm, US $90.00 – Picture 0
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits ? 0.8mm, US $90.00 – Picture 1
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits ? 0.8mm, US $90.00 – Picture 2
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits ? 0.8mm, US $90.00 – Picture 3
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits ? 0.8mm, US $90.00 – Picture 0
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits ? 0.8mm, US $90.00 – Picture 1
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits ? 0.8mm, US $90.00 – Picture 2
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits ? 0.8mm, US $90.00 – Picture 3

Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits ? 0.8mm

US $90.00

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
Open on mobile:
QR code
We offer 1 complect, containing 25pcs. Solid Micro Carbide Drill Bits 0.8mm Manufacturer: KEMMER PRAZISION Hartmetal Feinwerkzeuge GmbH. Model: 12900800 MPN: 9002 Pi: 0.8mm The drill bits are used in metalworking, in handcrafting where precision is necessary!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand KEMMER
MPN 9002
Model 12900800
Country/Region of Manufacture Germany

Directions

Similar products from Solid Carbide Drill Bits

8.30MM KENNAMETAL Carbide Coolant Drill B211F08300HP KCM15

8.30MM KENNAMETAL Carbide Coolant Drill B211F08300HP KCM15

  • Windsor, Connecticut, United States
  • Jan 30th
17MM YG Carbide Drill 2F TIALN DH404170 3XD

17MM YG Carbide Drill 2F TIALN DH404170 3XD

  • Windsor, Connecticut, United States
  • Jan 30th
20 pieces Brass Wire Rotary FLAT BRUSH Cups brushes 3mm shank 5mm brush

20 pieces Brass Wire Rotary FLAT BRUSH Cups brushes 3mm shank 5mm brush

  • fuzhou, China
  • Jan 30th
Solid Carbide Drill bit Guhring 9.52mm 3/8" New

Solid Carbide Drill bit Guhring 9.52mm 3/8" New

  • DeKalb, Illinois, United States
  • Jan 30th
New Mitsubishi solid carbide drill MWS0490MB VP15TF

New Mitsubishi solid carbide drill MWS0490MB VP15TF

  • Jaffrey, New Hampshire, United States
  • Jan 30th
10 PCS D 1,90 mm SOLID CARBIDE DRILL PCB.

10 PCS D 1,90 mm SOLID CARBIDE DRILL PCB.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
10 PCS D 1,2 mm SOLID CARBIDE DRILL PCB.

10 PCS D 1,2 mm SOLID CARBIDE DRILL PCB.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
10 PCS D 1,4 mm SOLID CARBIDE DRILL PCB.

10 PCS D 1,4 mm SOLID CARBIDE DRILL PCB.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
Kemmer Prazision 100pcs, Solid Micro Carbide Drill Bits 1.9mm.

Kemmer Prazision 100pcs, Solid Micro Carbide Drill Bits 1.9mm.

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
Kemmer Prazision 100pcs, Solid Micro Carbide Drill Bits 1.4mm

Kemmer Prazision 100pcs, Solid Micro Carbide Drill Bits 1.4mm

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
Kemmer Prazision 15pcs, Solid Micro Carbide Drill Bits 1.0mm

Kemmer Prazision 15pcs, Solid Micro Carbide Drill Bits 1.0mm

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits 3.1mm

Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits 3.1mm

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits 1.9mm

Kemmer Prazision 25pcs, Solid Micro Carbide Drill Bits 1.9mm

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
Carbide Cutters - 5 pieces

Carbide Cutters - 5 pieces

  • North Fort Myers, Florida, United States
  • Jan 30th
HAWERA 25pcs. Special Micro Carbide Drill Bits 0.9mm, PCB

HAWERA 25pcs. Special Micro Carbide Drill Bits 0.9mm, PCB

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
HAWERA 25pcs. Special Micro Carbide Drill Bits 3.1mm, PCB

HAWERA 25pcs. Special Micro Carbide Drill Bits 3.1mm, PCB

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
HAWERA 25pcs. Special Micro Carbide Drill Bits 2.0mm, PCB

HAWERA 25pcs. Special Micro Carbide Drill Bits 2.0mm, PCB

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
HAWERA 25pcs. Special Micro Carbide Drill Bits 2.8mm, PCB

HAWERA 25pcs. Special Micro Carbide Drill Bits 2.8mm, PCB

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
6mm, Three (3) Flute, Single End, Solid Carbide

6mm, Three (3) Flute, Single End, Solid Carbide

  • Orlando, Florida, United States
  • Jan 30th
6.1 mm + 7.0 mm COATED CARBIDE DRILL (2pcs)

6.1 mm + 7.0 mm COATED CARBIDE DRILL (2pcs)

  • Israel, Israel
  • Jan 30th

People who viewed this item also vieved

USED SCULLY JONES SAFE TORQUE TAP DRIVER HOLDER 16550 (#4MT SHANK)

USED SCULLY JONES SAFE TORQUE TAP DRIVER HOLDER 16550 (#4MT SHANK)

  • Fairfield, Iowa, United States
  • Mar 11th
Lot 5 NOS Precision High Speed Steel Drill Bits 9/16" R10 Jobbers Length

Lot 5 NOS Precision High Speed Steel Drill Bits 9/16" R10 Jobbers Length

  • Belfast, Maine, United States
  • Mar 11th
LOT OF (11) COUNTERBORE CUTTERS WITH (58) INT. PILOTS - SPOTFACE TOOL

LOT OF (11) COUNTERBORE CUTTERS WITH (58) INT. PILOTS - SPOTFACE TOOL

  • Monsey, New York, United States
  • Mar 11th
Cleveland 3" #4 Morse Taper Shank Drill

Cleveland 3" #4 Morse Taper Shank Drill

  • Lowell, Indiana, United States
  • Mar 26th
One Lot of Taper Shanks Drill Bits 6767-1128

One Lot of Taper Shanks Drill Bits 6767-1128

  • Hillsdale, New Jersey, United States
  • Mar 26th
Lot of R8 Collets, Enco Drill Chuck, Fly Cutter

Lot of R8 Collets, Enco Drill Chuck, Fly Cutter

  • Shreve, Ohio, United States
  • Mar 26th
31/32 inch TRW Drill 2 flutes 10-1/2 inch overall length 4 inch shank length USA

31/32 inch TRW Drill 2 flutes 10-1/2 inch overall length 4 inch shank length USA

  • Palos Hills, Illinois, United States
  • May 23rd
LONG HI SPEED SPIRAL DRILLS, LOT SIZE 13, DRILL SIZE 11/32" - .3438, 6" LONG

LONG HI SPEED SPIRAL DRILLS, LOT SIZE 13, DRILL SIZE 11/32" - .3438, 6" LONG

  • Portland, Oregon, United States
  • May 23rd
LONG HI SPEED SPIRAL DRILLS, LOT SIZE 13, DRILL SIZE 5/32" -.1562, 6" LONG

LONG HI SPEED SPIRAL DRILLS, LOT SIZE 13, DRILL SIZE 5/32" -.1562, 6" LONG

  • Portland, Oregon, United States
  • May 23rd
ISCAR DR0750-2250-100-06-3D-N TWIST DRILL WITH COOLANT HOLES

ISCAR DR0750-2250-100-06-3D-N TWIST DRILL WITH COOLANT HOLES

  • Toronto, Ontario, Canada
  • Jun 25th
GUHRING Carbide Coolant Straight Flute Drill 11.4mm 2534533 3rd Pass USA [2111]

GUHRING Carbide Coolant Straight Flute Drill 11.4mm 2534533 3rd Pass USA [2111]

  • Saint Louis, Missouri, United States
  • Jun 25th
GUHRING Carbide Coolant Straight Flute Drill 15.85mm 2-13-249004-003 USA [2100]

GUHRING Carbide Coolant Straight Flute Drill 15.85mm 2-13-249004-003 USA [2100]

  • Saint Louis, Missouri, United States
  • Jun 25th
PERCISION DRILLS #15 and #P IN JOBBER LEINGTH

PERCISION DRILLS #15 and #P IN JOBBER LEINGTH

  • Santa Rosa, California, United States
  • May 24th
Lot of 9 Precision Twist 2A .85 mm Metric Jobber Drills USA

Lot of 9 Precision Twist 2A .85 mm Metric Jobber Drills USA

  • Crystal Lake, Illinois, United States
  • May 24th
Lot of 4 Precision Twist 2A 2.00 mm Metric Jobber Drills USA

Lot of 4 Precision Twist 2A 2.00 mm Metric Jobber Drills USA

  • Crystal Lake, Illinois, United States
  • May 24th
bowling ball drill bit size 31/32

bowling ball drill bit size 31/32

  • Paris, Tennessee, United States
  • May 27th
Screw Machine Cobalt Drills 5/32" 135D TiAlN 2-1/16" OAL USA QTY 12 <472>

Screw Machine Cobalt Drills 5/32" 135D TiAlN 2-1/16" OAL USA QTY 12 <472>

  • Saint Louis, Missouri, United States
  • May 27th
TITEX Screw Machine Parabolic Drill 11/32&#034; V-HSS TiN 3xD 130 deg 3-5/16&#034; [406]

TITEX Screw Machine Parabolic Drill 11/32" V-HSS TiN 3xD 130 deg 3-5/16" [406]

  • Saint Louis, Missouri, United States
  • May 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies