Keyence Analog Sensor, US $400 – Picture 0

Keyence Analog Sensor, US $400 – Picture 1

Keyence Analog Sensor, US $400 – Picture 2

Keyence Analog Sensor

US $400

Monroe, North Carolina, United States
Jan 29th

Open on mobile:
QR code

Brand new Keyence RV-10 analog sensor. On Jul-22-13 at 19:19:55 PDT, seller added the following information:MAIN MENU PRODUCTS APPLICATIONS INDEX SELECTION GUIDE Compact Analog Sensor Controller RV-10 Series RV-10 Series Features ? Super-bright two-color LED display ? 1/4 the size of conventional models ? Multi-function/high-speed processing ? Easy setup and operation Measuring range ±5 VDC, ±10 VDC, ±20 mA DC (selectable) Description 1/4 the size of conventional models The RV-10 is packed with useful functions but only requires a panel surface area of 48 mm 1.89" x 48 mm 1.89". The RV-10 is ideal for use in a miniaturized control panel or limited spaces. Easy setup and operation You can set up tolerance limits and various modes using only five keys. Setting modes with the RV- 10 is easy. Push the [SET] key and the A to H modes are displayed in sequence. Two-color LED display The RV-10 uses a bright 2-color LED display, providing high visibility. Measured values are displayed in green when within the tolerance range, and in red when outside the range. Acceptable/ unacceptable values can be easily seen, even from a distance. Multi-function/high-speed processing The RV-10 provides a range of data processing modes such as peak hold, bottom hold and peak-to-peak hold, making target eccentricity and vibration easy to measure. The RV- 10 has a fast sampling rate of 200 cycles/sec., allowing even instanta- neous changes to be detected. New terminal block prevents screws from falling out KEYENCE’s unique new terminal block holds loose screws to keep them from dropping. No more missing screws during wiring work in the field. Input (V) (200 cycles/sec.) 10 0 Time 434 Internal sampling timingOn Jul-22-13 at 19:23:04 PDT, seller added the following information:Specifications Compact Analog Sensor Controller RV-10 DC voltage measurement, DC current measurement Successive comparison ±5 VDC, ±10 VDC, ±20 mA DC (selectable) -19999 to +19999 ±0.075% of F.S. 1. 1 M? (for voltage input), 350? (for current input) Single-ended 1 200/s 20/s 7-segment, 3-color LED FFFF is displayed NPN or non-voltage contact signal Upper/Lower limits 2 steps NPN (HIGH, GO, LOW): 100 mA max. (40 V max.) 10 ms (maximum speed) 60 ms (ON/OFF selectable) 24 VDC±10% 0 to +50°C Approx. 160 g Sample hold mode: Holds the value at the rising edge of the synchronous input (when synchronous input turns on). Trigger mode Trigger mode is used to select trigger input methods. Use this mode to specify the sampling period for the hold mode. The RV-10 provides the following four trigger modes. • External trigger: Uses input from an external sensor. • Self-trigger UP (DOWN) : Activated when measured value exceeds (falls below) preset trigger level. • Flicker trigger: Activated in a preset cycle. Auto-zero function Push the [ZERO] key and the RV-10 resets any input value to “0000”. This function simplifies output adjustment during setup and zero-point adjustment during product changeover. Model Measurement function A/D converting system Measurement range Display range Measurement accuracy Range-over alarm RV-10 Input Sampling rate Display rate Display character Impedance System Number of inputs Control input Synchronous Reset Auto-zero Control output Off-delay time Power supply Ambient temperature Weight Tolerance setting Signal type Response time 1. For DC voltage measurement only. At an ambient temperature of +5°C to +45°C. Functions Scaling mode Scaling mode enables you to set the desired scale for viewing the data.You can also freely set the display to show the actual measured data. Various hold modes Peak (Bottom) hold mode: Holds the maximum (minimum) value during a specified period. Peak-to-peak hold mode: Holds the difference between maximum and minimum values during a specified period. Input value Sample Input hold value waveform Synchronous ON input OFF Time Input value Input waveform Synchronous ON input OFF Peak hold value Bottom hold value Time Input value Input waveform p Synchronous ON input (p-b) OFF b b’ p’ Peak-to-peak hold value Time 435

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Keyence
Model	RV-10