+ Post new Ad
KITAMURA MyCenter-3 VERTICAL MACHINING CENTER FANUC SIDE ARM ATC BOX WAYS 3 SPD, US $13000 – Picture 0
KITAMURA MyCenter-3 VERTICAL MACHINING CENTER FANUC SIDE ARM ATC BOX WAYS 3 SPD, US $13000 – Picture 0

Kitamura Mycenter-3 Vertical Machining Center Fanuc Side Arm Atc Box Ways 3 Spd

US $13000

  • Louisville, Kentucky, United States
  • Jun 19th
Open on mobile:
QR code
  THIS AUCTION IS FOR A USED KITAMURA MyCenter-3 VERTICAL MACHINING CENTER. https://youtu.be/YuPjy5ZjlGQ BOX WAY-HEAVY DUTY MACHINING CENTER WITH FANUC O-M CONTROLLER, 20HP 8K RPM SPINDLE DRIVE, 3 SPEED SPINDLE GEARBOX 30 POSITION SIDE ARM BT-40 TOOL CHANGER YOU CAN SEE MACHINE UNDER POWER IN MY WAREHOUSE. $$$PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS OR SHIPPING QUOTE$$$ GENERAL SPECIFICATIONS TABLE SIZE 43.3" X 20.6" (1100 X 522MM) MAXIMUM TABLE LOAD 1,320 LBS. (600 KG) TABLE TRAVELS--LONGITUDINAL (X-AXIS) 3 32.9" (835MM) --CROSS (Y-AXIS) 18.7" (475MM) --VERTICAL (Z-AXIS) 18.1" (460MM) SPINDLE DRIVE MOTOR 20 HP (15 KW) SPINDLE SPEED RANGE MIN - MAX 20 TO 8,000 RPM SPINDLE TAPER BT40 FEED RATES--X & Y AXIS / Z-AXIS 0 TO 1181 IPM / 944IPM RAPID TRAVERSE RATE, ALL AXIS 0 TO 1417 IPM TOOL STORAGE CAPACITY 30 TOOL SWING ARM WAY SYSTEM BOX WAYS ELECTRICS 220/3/60 HZ MACHINE DIMENSIONS (L X W X H) 112" X 114" X 110" MACHINE WEIGHT, APPROX 15,880 LBS. (7200 KG) EQUIPPED WITH FANUC O-M CONTROL, RIGID TAPPING, RS232 PORT, AUTOMATIC LUBRICATION SYSTEM, OIL COOLER. DRILL AND TAP WORK PLATE PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS.       

Directions

Similar products from Metalworking Equipment

May Tool Circle Shear Ring Cutter Sheet Metal Model CS52 Very Good Condition

May Tool Circle Shear Ring Cutter Sheet Metal Model CS52 Very Good Condition

  • Southern California, United States
  • Jun 19th
T & O 7 JEWELS INDICATOR .0005"

T & O 7 JEWELS INDICATOR .0005"

  • Naperville, Illinois, United States
  • Jun 19th
CRAFTSMAN MACHINIST TOOL BOX 27' 8 DRAWER WITH 28" RISER 2 DRAWER

CRAFTSMAN MACHINIST TOOL BOX 27' 8 DRAWER WITH 28" RISER 2 DRAWER

  • Naperville, Illinois, United States
  • Jun 19th
NORK INDICATOR NO. 395

NORK INDICATOR NO. 395

  • Naperville, Illinois, United States
  • Jun 19th
STARRETT HOLD DOWNS NO. 54 4", 4', 6", 6", 6"

STARRETT HOLD DOWNS NO. 54 4", 4', 6", 6", 6"

  • Naperville, Illinois, United States
  • Jun 19th
Tapmatic 50X Automatic Tapping Attachment with 3 collets

Tapmatic 50X Automatic Tapping Attachment with 3 collets

  • Burlingame, California, United States
  • Jun 19th
SMW #AC-60 SERVO INDEXER

SMW #AC-60 SERVO INDEXER

  • Brook Park, Ohio, United States
  • Jun 19th
PARKER SCHRADER BELLOWS VALVE N 3155254549. K 025203549

PARKER SCHRADER BELLOWS VALVE N 3155254549. K 025203549

  • Brooklyn, New York, United States
  • Jun 19th
HEAVY DUTY ELECTRIC FOOT SWITCH PEDAL 4 PIN INTERFACED

HEAVY DUTY ELECTRIC FOOT SWITCH PEDAL 4 PIN INTERFACED

  • Los Angeles, California, United States
  • Jun 19th
Kanetsu MB-B Magnetic Base/Holder

Kanetsu MB-B Magnetic Base/Holder

  • Muskegon, Michigan, United States
  • Jun 19th
OKUMA V4020 CADET MATE VMC 1996 4TH AXIS READY

OKUMA V4020 CADET MATE VMC 1996 4TH AXIS READY

  • Louisville, Kentucky, United States
  • Jun 19th
Hardin Industrial HCG-6200 Fillet Corner Seam Weld Low Profile Grinder Polisher

Hardin Industrial HCG-6200 Fillet Corner Seam Weld Low Profile Grinder Polisher

  • Cambridge, Ontario, Canada
  • Jun 19th
HELLER, HMC, HCS300, MILLING, DRILLING, TAPPING HEADS, MULTI, HORIZONTAL,ETC.

HELLER, HMC, HCS300, MILLING, DRILLING, TAPPING HEADS, MULTI, HORIZONTAL,ETC.

  • Roseville, Michigan, United States
  • Jun 19th
LECTROETCH ELECTROCHEMICAL MARKING POWER UNIT MODEL 6A WITH MANUAL

LECTROETCH ELECTROCHEMICAL MARKING POWER UNIT MODEL 6A WITH MANUAL

  • Leesburg, Florida, United States
  • Jun 19th
Lectroetch Power Unit and Type MU Bench Fixture Model V-10A

Lectroetch Power Unit and Type MU Bench Fixture Model V-10A

  • Sanford, Florida, United States
  • Jun 19th
KASTO, POWER HACKSAW, 11" ROUND, AUTOMATIC, DUAL VISES,4HP, WIRED 220 VOLT

KASTO, POWER HACKSAW, 11" ROUND, AUTOMATIC, DUAL VISES,4HP, WIRED 220 VOLT

  • Roseville, Michigan, United States
  • Jun 19th
Vintage Industrial Salvage RE-UNION FAMILY PRESS Wood Sculpture Cast Iron Plate

Vintage Industrial Salvage RE-UNION FAMILY PRESS Wood Sculpture Cast Iron Plate

  • Decatur, Indiana, United States
  • Jun 19th
TENNANT FLOOR SCRUBBER, MODEL T5 JUST DO NOT USE IT

TENNANT FLOOR SCRUBBER, MODEL T5 JUST DO NOT USE IT

  • Harrison Township, Michigan, United States
  • Jun 19th
21 CLAUSING COLCHESTER LATHE - DRO - 3-9/16" BORE

21 CLAUSING COLCHESTER LATHE - DRO - 3-9/16" BORE

  • Harrodsburg, Kentucky, United States
  • Jun 19th
SUPER RARE ANTIQUE POLISH BLACKSMITH ANVIL MUSEUM DATED 1840 HIGHLY DECORATED

SUPER RARE ANTIQUE POLISH BLACKSMITH ANVIL MUSEUM DATED 1840 HIGHLY DECORATED

  • Graz, Austria
  • Jun 19th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies