+ Post new Ad
Kurt Vise D810 AngLock "D" Series 8" vise with 10" opening, US $300 – Picture 0
Kurt Vise D810 AngLock "D" Series 8" vise with 10" opening, US $300 – Picture 1
Kurt Vise D810 AngLock "D" Series 8" vise with 10" opening, US $300 – Picture 2
Kurt Vise D810 AngLock "D" Series 8" vise with 10" opening, US $300 – Picture 0
Kurt Vise D810 AngLock "D" Series 8" vise with 10" opening, US $300 – Picture 1
Kurt Vise D810 AngLock "D" Series 8" vise with 10" opening, US $300 – Picture 2

Kurt Vise D810 Anglock "d" Series 8" Vise With 10" Opening

US $300

  • East Moline, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
Kurt D810 Work-holding Vise The original Kurt Anglock D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders and machining centers. DSeries vises are ideal for use in running production parts where datums, flatness and parallelism is important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel, and iron in your Kurt Anglock vises. No other brand can give you the time proven accuracy of the Kurt Anglock vises. All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure. Features of All D-Series Vises Include: • AngLock design assures the movable jaw does not lift. • Hardened vise bed.                                     • Hardened jaw plates.                                                     • Semi-hard steel screw. • 80,000-PSI ductile iron body.                           Kurt’s new D810 features a new updated body style: • Quick Set-up feature. • Top down, four bolt design on the stationary jaw reduces vise deflection by 25 percent while allowing total disassembly of the vise without removing the body from the machine table. Special brush seals shield and protect vise screw threads from machined chips and residue. • The nut has been shortened so as not to protrude past the end of the vise body. New powder coat paint finish resists coolant-induced peeling for greater corrosion protection. The overall vise footprint is identical to earlier models so both can be used interchangeably and in tandem. • With a jaw opening of 10" and clamping force up to 11,600 lbs., the D810 vise locks parts precisely including very large parts for aggressive “hogging out” operations.     My Feedback is 100%! Bid with confidence. MADE IN USA      
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Kurt
Model D810
Country/Region of Manufacture United States

Directions

Similar products from Grips & Tongs

Kurt, 3/4" Hex, 8 5/8" Handle Assembly

Kurt, 3/4" Hex, 8 5/8" Handle Assembly

  • Chillicothe, Missouri, United States
  • Jan 30th
Vintage Unbranded Cast Metal Pipe Vise

Vintage Unbranded Cast Metal Pipe Vise

  • Canadensis, Pennsylvania, United States
  • Jan 30th
Armstrong Chain Vise Vintage 1/8 to 2-1/2 pipe #1C

Armstrong Chain Vise Vintage 1/8 to 2-1/2 pipe #1C

  • Carleton, Michigan, United States
  • Jan 30th
Pin Vice

Pin Vice

  • Victoria, BC, Canada
  • Jan 30th
VINTAGE TOOLMAKER'S MACHINIST STEEL VISE GRINDING MILLING JIG CLAMP

VINTAGE TOOLMAKER'S MACHINIST STEEL VISE GRINDING MILLING JIG CLAMP

  • Herkimer, New York, United States
  • Jan 30th
Used D60 CNC Mill Vise

Used D60 CNC Mill Vise

  • Lynnwood, Washington, United States
  • Jan 30th
Used D60 CNC Mill Vise (no handle)

Used D60 CNC Mill Vise (no handle)

  • Lynnwood, Washington, United States
  • Jan 30th
LW CHUCK TOLEDO 4-1/2" MACHINIST DRILL PRESS / MILL VISE

LW CHUCK TOLEDO 4-1/2" MACHINIST DRILL PRESS / MILL VISE

  • Covina, California, United States
  • Jan 30th
Vintage Yankee No.992 Milling Machinist Drill Press Vise

Vintage Yankee No.992 Milling Machinist Drill Press Vise

  • Waterbury, Connecticut, United States
  • Jan 30th
LIGHTNIN ROD RandR Tool-Vise Accessories Product Compatibility 12-0010-DJ

LIGHTNIN ROD RandR Tool-Vise Accessories Product Compatibility 12-0010-DJ

  • New Bedford, Massachusetts, United States
  • Jan 30th
Wilton 11127S41 Serrated Jaw Insert For 11127

Wilton 11127S41 Serrated Jaw Insert For 11127

  • United States
  • Jan 30th
Vise Grip 226306 6" Heavy Duty Workshop Vise

Vise Grip 226306 6" Heavy Duty Workshop Vise

  • United States
  • Jan 30th
Wilton 21300-03 Jaw Inserts For 21300 (2130003)

Wilton 21300-03 Jaw Inserts For 21300 (2130003)

  • United States
  • Jan 30th
Universal Vise and Tool Company Tail Stock

Universal Vise and Tool Company Tail Stock

  • Allenwood, New Jersey, United States
  • Jan 30th
Pittsburgh P31000 5" Drill Press Vise

Pittsburgh P31000 5" Drill Press Vise

  • Canton, Ohio, United States
  • Jan 30th
2 Bora 18" Pistol Grip Quick Clamps (2 Pack), Brand New, Free Shipping, AF540818

2 Bora 18" Pistol Grip Quick Clamps (2 Pack), Brand New, Free Shipping, AF540818

  • Wauconda, Illinois, United States
  • Jan 30th
NO. 42 RED LITTLESTOWN HOWE & FDRY CO. CAST IRON BENCH YOKE PIPE VISE ANTIQUE

NO. 42 RED LITTLESTOWN HOWE & FDRY CO. CAST IRON BENCH YOKE PIPE VISE ANTIQUE

  • Campbellsville, Kentucky, United States
  • Jan 30th
JAPAN! ERON SWIVEL BASE FOR 6" / 150MM MILLING MACHINE VISE - 30MM SPUD DIAMETER

JAPAN! ERON SWIVEL BASE FOR 6" / 150MM MILLING MACHINE VISE - 30MM SPUD DIAMETER

  • Chino, California, United States
  • Jan 30th
Milling vise work stop locator cnc mill 3/8 - 1" jaw clamping tool bridgeport

Milling vise work stop locator cnc mill 3/8 - 1" jaw clamping tool bridgeport

  • Montrose, Michigan, United States
  • Jan 30th
USED KURT MANUAL CLUSTER TOWER TOMBSTONE VISE Model II - 400mm Pallet

USED KURT MANUAL CLUSTER TOWER TOMBSTONE VISE Model II - 400mm Pallet

  • Emporia, Kansas, United States
  • Jan 30th

People who viewed this item also vieved

Mill Guard Flip Shield CNC Bridgeport

Mill Guard Flip Shield CNC Bridgeport

  • Carrollton, Ohio, United States
  • May 29th
Slotted Structural Plate, 36" L X 2-13/16" W X 0.074" T, Steel, Galvanized Steel

Slotted Structural Plate, 36" L X 2-13/16" W X 0.074" T, Steel, Galvanized Steel

  • Tehachapi, California, United States
  • May 29th
5C Indexer

5C Indexer

  • Costa Mesa, California, United States
  • May 29th
Hardinge 5C collet 3/8" D. NEW !

Hardinge 5C collet 3/8" D. NEW !

  • Addison, Illinois, United States
  • May 30th
Lyndex 16C collet 1-3/8" D. #160-088

Lyndex 16C collet 1-3/8" D. #160-088

  • Addison, Illinois, United States
  • May 30th
Pratt and Whitney collets 3PN collet closer and Draw Bar Metal Lathe

Pratt and Whitney collets 3PN collet closer and Draw Bar Metal Lathe

  • Milford, Nebraska, United States
  • May 30th
NEW OLD STOCK MORSE TAPER MT4 LATHE LIVE CENTER. Morse Taper #4. Made in USSR

NEW OLD STOCK MORSE TAPER MT4 LATHE LIVE CENTER. Morse Taper #4. Made in USSR

  • Volodarka, default, Ukraine
  • May 31st
NEW OLD STOCK MORSE TAPER MT3 LATHE LIVE CENTER. Morse Taper #3. Made in USSR

NEW OLD STOCK MORSE TAPER MT3 LATHE LIVE CENTER. Morse Taper #3. Made in USSR

  • Volodarka, default, Ukraine
  • May 31st
Dead Center 1 3/4" x 5" long

Dead Center 1 3/4" x 5" long

  • Montebello, California, United States
  • May 31st
BISON Self-Centering Scroll Chuck - CHUCK SIZE: 5'' Tool Material:

BISON Self-Centering Scroll Chuck - CHUCK SIZE: 5'' Tool Material:

  • Duncan, South Carolina, United States
  • Jun 1st
BISON 3 Jaw Self-Centering Scroll Chuck - CHUCK SIZE: 6''

BISON 3 Jaw Self-Centering Scroll Chuck - CHUCK SIZE: 6''

  • Duncan, South Carolina, United States
  • Jun 1st
BISON Camlock Spindles ''D1'' Series (Direct Mounting) Chuck-CHUCK SIZE:6'' 25lb

BISON Camlock Spindles ''D1'' Series (Direct Mounting) Chuck-CHUCK SIZE:6'' 25lb

  • Duncan, South Carolina, United States
  • Jun 1st
De Sta Co Welders Clamps 3 Of 4

De Sta Co Welders Clamps 3 Of 4

  • Paris, Ohio, United States
  • Jun 1st
De Sta Co Welders Clamps 2 Of 4

De Sta Co Welders Clamps 2 Of 4

  • Paris, Ohio, United States
  • Jun 1st
De Sta Co Welders Clamps 1 Of 4

De Sta Co Welders Clamps 1 Of 4

  • Paris, Ohio, United States
  • Jun 1st
Machinist Lot Of 8 Set Up Blocks Hardened & Ground Tool Maker Made

Machinist Lot Of 8 Set Up Blocks Hardened & Ground Tool Maker Made

  • Yorktown, Indiana, United States
  • Jun 9th
V BLOCKS & CLAMPS, SET of 2, VB/SP/R/T/125 2.725" X 2.465" X1.750

V BLOCKS & CLAMPS, SET of 2, VB/SP/R/T/125 2.725" X 2.465" X1.750

  • MA, United States
  • Jun 9th
POLAND! MATCHED PAIR OF PRECISION TOOLMAKER'S V-BLOCKS w/ CLAMPS #PPSb 36x40x45

POLAND! MATCHED PAIR OF PRECISION TOOLMAKER'S V-BLOCKS w/ CLAMPS #PPSb 36x40x45

  • Covina, California, United States
  • Jun 9th
Original Southbend 16 Inch Steady Rest Lathe 16-125

Original Southbend 16 Inch Steady Rest Lathe 16-125

  • Van Meter, Iowa, United States
  • Jun 9th
MACHINIST TOOL LATHE Machinist Lot of 2 Starrett Screw Jack s for Set Up

MACHINIST TOOL LATHE Machinist Lot of 2 Starrett Screw Jack s for Set Up

  • Morris Plains, New Jersey, United States
  • Jun 9th
NEW HAAS TL-1 LATHE STEADY REST

NEW HAAS TL-1 LATHE STEADY REST

  • West Berlin, New Jersey, United States
  • Jun 9th
Haas 5C Indexer

Haas 5C Indexer

  • Minneapolis, Minnesota, United States
  • Jun 10th
HARDINGE ROTARY TABLE CONTROLLER WITH TABLE

HARDINGE ROTARY TABLE CONTROLLER WITH TABLE

  • Brookville, Ohio, United States
  • Jun 10th
Brown & Sharpe 18" Horizontal Rotary Table Index to 2 Mins Mill Milling Fixture

Brown & Sharpe 18" Horizontal Rotary Table Index to 2 Mins Mill Milling Fixture

  • Lorain, Ohio, United States
  • Jun 10th
"Frog Parking Mini Counted Cross Stitch Kit-5""X7"" 14 Count"

"Frog Parking Mini Counted Cross Stitch Kit-5""X7"" 14 Count"

  • Hickory Hills, Illinois, United States
  • Jun 17th
One-Derful One-Patch Template-Tessellating Windmill

One-Derful One-Patch Template-Tessellating Windmill

  • Hickory Hills, Illinois, United States
  • Jun 17th
"Omnigrip On Point Ruler-15-1/8""X6-5/8"""

"Omnigrip On Point Ruler-15-1/8""X6-5/8"""

  • Hickory Hills, Illinois, United States
  • Jun 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies