+ Post new Ad
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 0
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 1
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 2
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 3
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 4
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 5
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 0
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 1
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 2
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 3
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 4
Lazervac Zephyr Engineering LV2442 Dust collector 7.5 Hp 3490 RPM, US $2,499.99 – Picture 5

Lazervac Zephyr Engineering Lv2442 Dust Collector 7.5 Hp 3490 Rpm

US $2,499.99

  • Francis Creek, Wisconsin, United States
  • Jan 30th
Open on mobile:
QR code
Lazervac Zephyr Engineering LV2442 Dust collector Zephyr Engineering Lazervac Dust Collector Date manufactured 1995 Model LV2442 Serial No. 213 Air pressure 90 PSI Empties into a 55 gallon drum Power 240/460, 60 Hz, 3 Ph Motor Lincoln AC motor Model TF4284CN Frame 213TC Hz 60 HP 7.5 RPM 3490 Volt 230-460 Enclosure TEFC Amps 18.6/9.3 Phase 3 Used, taken from a factory clean out Email or call 920-684-9999 w/questions PLEASE READ PRIOR TO BIDDING You are buying the above as is (If you are not sure what that means, look it up AS IS). This means don't assume anything. If you have a question, ask. If it is not listed as NEW, then don't assume that it is...It is sold as seen, as is. Unless an item specifically states that it has been tested, it has not been tested. If you would like an item to be tested and can tell us how to do so, please call/ email us and we will make every attempt to do so. However, please understand that our business is rigging and we are not electrical engineers. Most items were removed from working machines but are still sold AS IS.....Feedback will only be left if you leave positive feedback. EBAY has removed the sellers right to post anything other than positive feedback and we feel that positive feedback should be mutually reciprocated. Lastly, if you try to threaten use of negative feedback to get something that was not listed or a service that was not listed, we will forward the request to EBAY without notice.                                                                                                                                                 SHIPPING Buyer is responsible for all shipping/insurance costs. Shipping size and weight for the unit are as follows: 1542 pounds with the pallet. Dimensions are 122"x68"x62" high. We will load for you at no additional charge from a commercial building with a loading dock and the driver does not need to come inside. We will provide your shipper with a bill of lading and any other paperwork you require to ship the unit. Please fax any additional paperwork to us after payment has been made. Note that Wisconsin residents are required to pay 5.5% sales tax unless exempt. We require payment within 4 days of purchase. Please call 920-684-9999 or email us via ebay with any questions.  Upper Shop

Directions

Similar products from Other Woodworking Equipment & Machines

Dual Cyclone Dust Collector with Koger Electric Valve

Dual Cyclone Dust Collector with Koger Electric Valve

  • Stone Mountain, Georgia, United States
  • Jan 30th
BLUM Mini Press Tabletop Boring Machine (Woodworking Machinery)

BLUM Mini Press Tabletop Boring Machine (Woodworking Machinery)

  • Oregon, Ohio, United States
  • Jan 30th
ATLAS WOODWORKING Machinery CATALOG No. W50 & PRICE LIST #RR170 lathe drill 1950

ATLAS WOODWORKING Machinery CATALOG No. W50 & PRICE LIST #RR170 lathe drill 1950

  • Perth, Ontario, Canada
  • Jan 30th
ATLAS WOODWORKING POWER TOOLS CATALOG No. W55 1954 #RR172 saw drill jointer

ATLAS WOODWORKING POWER TOOLS CATALOG No. W55 1954 #RR172 saw drill jointer

  • Perth, Ontario, Canada
  • Jan 30th
P-C drive belt for 360VS,360,362VS,361, and 362 sanders

P-C drive belt for 360VS,360,362VS,361, and 362 sanders

  • Belleville, Wisconsin, United States
  • Jan 30th
Reversing Switch Part for Powermatic Model 26 Shaper

Reversing Switch Part for Powermatic Model 26 Shaper

  • Salt Lake City, Utah, United States
  • Jan 30th
Kreg Jig K5 Pocket Hole with MKJKIT Mini Kreg Jig and Kreg HD KJHD Starter Kit

Kreg Jig K5 Pocket Hole with MKJKIT Mini Kreg Jig and Kreg HD KJHD Starter Kit

  • Ferndale, Washington, United States
  • Jan 30th
Height Adjusting Plate Part for Powermatic Model 26 Shaper

Height Adjusting Plate Part for Powermatic Model 26 Shaper

  • Salt Lake City, Utah, United States
  • Jan 30th
Klingspor Finishing Flap Wheel 150 Grit 8"x 2"x 3" Sanding Wheel

Klingspor Finishing Flap Wheel 150 Grit 8"x 2"x 3" Sanding Wheel

  • Martinsburg, West Virginia, United States
  • Jan 30th
NICHOLSON 104" WHOLE LOG CHIPPER 10 KNIFE

NICHOLSON 104" WHOLE LOG CHIPPER 10 KNIFE

  • Sutherlin, Oregon, United States
  • Jan 30th
Invicta TI-14 Tilting Spindle Shaper

Invicta TI-14 Tilting Spindle Shaper

  • Sheboygan, Wisconsin, United States
  • Jan 30th
Fletcher 3-Position Series E-Z Door, 7 Templates, Feed Table, Feeder Options 3Ph

Fletcher 3-Position Series E-Z Door, 7 Templates, Feed Table, Feeder Options 3Ph

  • Sheboygan, Wisconsin, United States
  • Jan 30th
1993 Evans 0205 Pinch Roll (Woodworking Machinery)

1993 Evans 0205 Pinch Roll (Woodworking Machinery)

  • Placentia, California, United States
  • Jan 30th
SENCO YK0188 REPAIR KIT, NEW IN ORIGINAL PACKAGING, FOR SFN40 FINISH NAILERS

SENCO YK0188 REPAIR KIT, NEW IN ORIGINAL PACKAGING, FOR SFN40 FINISH NAILERS

  • Ankeny, Iowa, United States
  • Jan 30th
Biesse Akron 840 Edgebander, 400 V, 3 Ph

Biesse Akron 840 Edgebander, 400 V, 3 Ph

  • Sheboygan, Wisconsin, United States
  • Jan 30th
Leadermac LMC 518S Smartmac, 2007, 8" 5-Head Moulder

Leadermac LMC 518S Smartmac, 2007, 8" 5-Head Moulder

  • Sheboygan, Wisconsin, United States
  • Jan 30th
Sternvent Company 3 hp Cyclone Type Dust Collector - Made in USA

Sternvent Company 3 hp Cyclone Type Dust Collector - Made in USA

  • Gardnerville, Nevada, United States
  • Jan 30th
SCMI Moulder electrical control cabinet mcc bucket starter panel Logic 23 440v

SCMI Moulder electrical control cabinet mcc bucket starter panel Logic 23 440v

  • DeKalb, Illinois, United States
  • Jan 30th
Vintage Wallace Bench Planer-Jointer 1/4 Hp Emerson Motor

Vintage Wallace Bench Planer-Jointer 1/4 Hp Emerson Motor

  • Elk River, Minnesota, United States
  • Jan 30th
OLIVER 399-V 18" Single Surface Planer (Woodworking Machinery)

OLIVER 399-V 18" Single Surface Planer (Woodworking Machinery)

  • Placentia, California, United States
  • Jan 30th

People who viewed this item also vieved

Delta 5 HP 1PH 10 in. Left Tilt Unisaw Table with 52 in. Biesemeyer Fence

Delta 5 HP 1PH 10 in. Left Tilt Unisaw Table with 52 in. Biesemeyer Fence

  • Trenton, New Jersey, United States
  • May 25th
VEGA UTILITY T SQUARE SAW FENCE 36"

VEGA UTILITY T SQUARE SAW FENCE 36"

  • Newfoundland, New Jersey, United States
  • May 25th
Olson Band Saw 1/8" Wide x 93-1/2" Long 14TPI Blade

Olson Band Saw 1/8" Wide x 93-1/2" Long 14TPI Blade

  • Cazenovia, New York, United States
  • May 25th
Quickwood CD2-30014 4 Head Profile / Moulding Sander

Quickwood CD2-30014 4 Head Profile / Moulding Sander

  • Stone Mountain, Georgia, United States
  • May 28th
Motor Guard RK-1 Rocker Block for 6-Inch Disc Sanding Block

Motor Guard RK-1 Rocker Block for 6-Inch Disc Sanding Block

  • not set, United States
  • May 28th
Dankey Machinery Pump Sander

Dankey Machinery Pump Sander

  • Santa Fe Springs, California, United States
  • May 28th
ROCKWELL DRILL PRESS 15" - TABLE 11 X 14 X 2 3/4" COLUMN

ROCKWELL DRILL PRESS 15" - TABLE 11 X 14 X 2 3/4" COLUMN

  • Minneapolis, Minnesota, United States
  • May 29th
PRECISION DRILL MACHINE CO. 8 1/2 " VARIABLE SPEED DRILL PRESS

PRECISION DRILL MACHINE CO. 8 1/2 " VARIABLE SPEED DRILL PRESS

  • Tempe, Arizona, United States
  • May 29th
NEW Champion Cutting Tool AC35 RotoBrute Portable Magnetic Drill Press

NEW Champion Cutting Tool AC35 RotoBrute Portable Magnetic Drill Press

  • Neosho, Missouri, United States
  • May 29th
Clausing 5914 lathe end cover

Clausing 5914 lathe end cover

  • Waynesville, North Carolina, United States
  • Jun 9th
Clausing lathe 5914 micrometer carriage stop

Clausing lathe 5914 micrometer carriage stop

  • Waynesville, North Carolina, United States
  • Jun 9th
Atlas TV48 10" Metal Lathe Carriage Saddle Casting 10F-9 (#1818)

Atlas TV48 10" Metal Lathe Carriage Saddle Casting 10F-9 (#1818)

  • Ivoryton, Connecticut, United States
  • Jun 9th
E-C Pneumatic Router Head 6000 RPM (EC-10 Router)

E-C Pneumatic Router Head 6000 RPM (EC-10 Router)

  • Fort Worth, Texas, United States
  • Jun 9th
Animal Chess STL 3d Model for 3D printer Printable or 4axis CNC Machine

Animal Chess STL 3d Model for 3D printer Printable or 4axis CNC Machine

  • moskow, Russian Federation
  • Jun 9th
USA CNC frame only! router engraver engraving milling machine 18"x26"

USA CNC frame only! router engraver engraving milling machine 18"x26"

  • Ashburn, Virginia, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies