Leadshine 2-phase Stepper Set (Drive + Motor) M542 + 57HS22-A 2.2N.M Original, US $128.00 – Picture 0

Leadshine 2-phase Stepper Set (Drive + Motor) M542 + 57HS22-A 2.2N.M Original, US $128.00 – Picture 1

Leadshine 2-phase Stepper Set (drive + Motor) M542 + 57hs22-a 2.2n.m Original

US $128.00

shenzhen,Guangdong, China
Jan 29th

Open on mobile:
QR code

Leadshine 2-phase Stepper Set (Drive + Motor) M542 + 57HS22-A 2.2N.M Original M542 Introductions: The M542 V2.0 is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors. Features: *Extremely cost-effective *Good high speed performance *Supply voltage up to +50 VDC *Output current up to 4.2A *Self-adjustment technology *Pure-sinusoidal current control technology *Pulse input frequency up to 300 KHz *TTL compatible and optically isolated input *Automatic idle-current reduction *15 selectable resolutions in decimal and binary, up to 25,600 steps/rev *Suitable for 2-phase and 4-phase motors *Support PUL/DIR and CW/CCW modes *Short-voltage, over-voltage, over-current protections Specifications: Parameters M542 Min Typical Max Unit Output current 1.0 - 4.2 (3.0 RMS) A Supply voltage +20 +36 +50 VDC Logic signal current 7 10 16 mA Pulse input frequency 0 - 300 kHz Isolation resistance 500 M? Applications: Suitable for a wide range of stepping motors, from NEMA size 17 to 34. It can be used in various kinds of machines, such as X-Y tables, engraving machines, labeling machines, laser cutters, pick-place devices, and so on. Particularly adapt to the applications desired with low noise, low heating, high speed and high precision. Other hot items of this Leadshine stepper drives for above applications: M542 Leadshine 2-phase Classic Analog Stepper Drive M542 DC20-50V 1.0-4.2A New M550 Leadshine 2-phase Classic Analog Stepper Drive M550 DC20-50V 1.2-5.0A New M752 Leadshine 2-phase Classic Analog Stepper Drive M752 DC20-75V 1.8-5.2A New M760 Leadshine 2-phase Classic Analog Stepper Drive M760 DC20-75V 1.45-6.0A New M860 Leadshine 2-phase Classic Analog Stepper Drive M860 DC24-80V 2.4-7.2A New M880A Leadshine 2-phase Classic Analog Stepper Drive M880A DC24-80V 2.8-7.8A New MA860H Leadshine 2-phase Classic Analog Stepper Drive MA860H DC24-80V 2.4-7.2A New 57HS22-A Description The 57HS22 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 8 motor leads, the motor can be connected in a few different ways, including bipolar series , bipolar parallel and unipolar. The 57HS22-A is single-axle. Features 2 phase 1.8° stepping angle NEMA 23 Holding toque of 2.2 N*m (312 oz-in) High precision Smooth movement Low motor heating Low movement noise Specifications: Step Angle 1.8° Step Angle Accuracy +5%(full step, no load) Temperature Rise 80°CMax Ambient Temperature -10°C -- +50°C Insulation Resistance 100M?min.500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.06 Max.(450g-load) Shaft Axial Play 0.08 max.(450g-load) Number of Leads 8 except 57HS04(6 leads) Electric Model Number Connection Holding Torque Oz-in (Nm) Phase Current (Amps) Phase Resistance (Ohm) Phase Inductance (mH) Rotor Inertia Oz-in-sec2 (g.cm2) 57HS22 (Bipolar) Parallel 283.2(2.0) 5.0 0.4±10% 1.8±20% 0.006816(480) (Bipolar) Series 283.2(2.0) 2.5 1.6±10% 7.2±20% Unipolar 198.24(1.4) 3.5 0.8±10% 1.8±20% Applications Suitable for all kinds of small automation equipment and instruments, such as: pneumatic marking machine, marking machine, cutting machine, laser marking machine, plotter, small engraving machine, CNC machine tools, handling equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments. Other stepper sets available in FASTTOBUY: M415B + 35HS01 Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 35HS01 0.07N.m New M415B + 39HS01 Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 39HS01 0.065N.m New M415B + 39HS02 Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 39HS02 0.22N.m New M415B + 42HS02 Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 42HS02 0.22N.m New M415B + 42HS03 Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 42HS03 0.34N.m New M415B + 42HS08 Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 42HS08 0.8N.m New Contact information: Fast To Buy Ltd 1207, International E-Commerce Industrial Park of FuTian, Shangmeilin, Futian district, Shenzhen, 518049, CN Phone: +0086 13724354369 or +0086 755 82546545 email: ebay@fasttobuy.com skype: ebayfasttobuy our working time: EST 9:00AM ~ 6:00 PM Shipment: Once payment received. Item will be shipped out within 1-3 working days by DHL, Fedex, UPS, EMS ASAP. Usually it takes 3-7 working days to most of the country. You will be notified the traking number once shipped out. Kindly please note the Tax fee and Customs clearance fee are not included in the item’s listing price. Kindly please feel free to contact us before shipping if there’s any thing we can do for you. Warranty: Fast To Buy Ltd make sure the item is brand new with original package and offer 1 year warranty for the quality. Return policy: We accept return or refund within 14 days for the quality reason, not man-made reason. Kindly please contact us before returning the package. Payment will be refunded to you within 24hrs once the package received by us. You understanding appreciate. Kindly note: Pls check and confirm the part NO. and your application before place order, any further assistance please feel free to let us know. Company picture:

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Leadshine
MPN	57HS22-A+M542
Model	57HS22-A+M542